5 files changed, 302 insertions, 0 deletions
diff --git a/source/n/nfs-utils/nfs-utils-1.1.4.tar.bz2.sign b/source/n/nfs-utils/nfs-utils-1.1.4.tar.bz2.sign
new file mode 100644
index 00000000..3457f1ef
--- /dev/null
+++ b/source/n/nfs-utils/nfs-utils-1.1.4.tar.bz2.sign
@@ -0,0 +1,8 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.9 (GNU/Linux)
+Comment: See http://www.kernel.org/signature.html for info
+
+iD8DBQBI+KqOyGugalF9Dw4RAuC3AJ97L3+wXMajwG6cIy+8GJJUQYWi3ACgkyET
+zLF2+bn5et1RX1dGiiijnhs=
+=VrzL
+-----END PGP SIGNATURE-----
diff --git a/source/n/nfs-utils/nfs-utils.SlackBuild b/source/n/nfs-utils/nfs-utils.SlackBuild
new file mode 100755
index 00000000..1e3f5cbf
--- /dev/null
+++ b/source/n/nfs-utils/nfs-utils.SlackBuild
@@ -0,0 +1,166 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=1.1.4
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-nfs-utils
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+# Explode the package framework:
+cd $PKG
+explodepkg $CWD/_nfs-utils.tar.gz
+
+# Add startup script:
+cat $CWD/rc.nfsd > $PKG/etc/rc.d/rc.nfsd.new
+# Off by default, unless there's a previous version that's turned on:
+chmod 644 $PKG/etc/rc.d/rc.nfsd.new
+
+cd $TMP
+rm -rf nfs-utils-$VERSION
+tar xvf $CWD/nfs-utils-$VERSION.tar.bz2 || exit 1
+cd nfs-utils-$VERSION || exit 1
+
+zcat $CWD/nfs-utils.lwrap.needs.lnsl.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# No NFSv4 yet -- it requires additional libraries.
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --mandir=/usr/man \
+  --with-statedir=/var/lib/nfs \
+  --enable-nfsv3 \
+  --enable-nfsv4=no \
+  --enable-gss=no \
+  --enable-secure-statd \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# These might be in use:
+( cd $PKG/var/lib/nfs
+  for config_file in etab rmtab state xtab ; do
+    mv ${config_file} ${config_file}.new
+  done
+)
+
+# No NFSv4 yet, so remove these:
+rm -f $PKG/sbin/*nfs4
+
+# Why were we doing this?
+mkdir -p $PKG/sbin
+mv $PKG/usr/sbin/rpc.statd $PKG/sbin
+( cd $PKG/usr/sbin ; ln -sf ../../sbin/rpc.statd . )
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/doc/nfs-utils-$VERSION
+cp -a \
+  AUTHORS COPYING INSTALL NEWS README \
+  $PKG/usr/doc/nfs-utils-$VERSION
+mkdir -p $PKG/usr/doc/nfs-utils-$VERSION/statd
+cp -a \
+  utils/statd/COPYING utils/statd/COPYRIGHT utils/statd/TODO \
+  $PKG/usr/doc/nfs-utils-$VERSION/statd
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat << EOF > $PKG/install/doinst.sh
+#!/bin/sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+EOF
+( cd $PKG/var/lib/nfs
+  for config_file in etab.new rmtab.new state.new xtab.new ; do
+    if [ -r ${config_file} ]; then
+      echo "config var/lib/nfs/${config_file}" >> $PKG/install/doinst.sh
+    fi
+  done
+)
+# If these aren't moved into place, they're junk:
+echo "rm -f var/lib/nfs/*.new" >> $PKG/install/doinst.sh
+cat << EOF >> $PKG/install/doinst.sh
+if [ -x etc/rc.d/rc.nfsd ]; then
+  chmod 755 etc/rc.d/rc.nfsd.new
+else
+  chmod 644 etc/rc.d/rc.nfsd.new
+fi
+config etc/rc.d/rc.nfsd.new
+config etc/exports.new
+EOF
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/nfs-utils-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/nfs-utils/nfs-utils.lwrap.needs.lnsl.diff b/source/n/nfs-utils/nfs-utils.lwrap.needs.lnsl.diff
new file mode 100644
index 00000000..c49196fe
--- /dev/null
+++ b/source/n/nfs-utils/nfs-utils.lwrap.needs.lnsl.diff
@@ -0,0 +1,11 @@
+--- ./configure.orig	2008-03-20 06:20:01.000000000 -0500
++++ ./configure	2008-03-31 17:19:22.000000000 -0500
+@@ -3933,7 +3933,7 @@
+                     CPPFLAGS="-I${with_tcpw} ${CPPFLAGS}"
+                 fi
+             fi
+-            LIBWRAP="-lwrap"
++            LIBWRAP="-lwrap -lnsl"
+             LIBS="$LIBWRAP $LIBS"
+             { echo "$as_me:$LINENO: checking for libwrap" >&5
+ echo $ECHO_N "checking for libwrap... $ECHO_C" >&6; }
diff --git a/source/n/nfs-utils/rc.nfsd b/source/n/nfs-utils/rc.nfsd
new file mode 100644
index 00000000..f2113382
--- /dev/null
+++ b/source/n/nfs-utils/rc.nfsd
@@ -0,0 +1,98 @@
+#!/bin/sh
+# Start/stop/restart the NFS server.
+#
+# This is an init script for the knfsd NFS daemons.
+# To use NFS, you must first set up /etc/exports.
+# See exports(5) for information on /etc/exports format.
+#
+# Written for Slackware Linux by Patrick J. Volkerding <volkerdi@slackware.com>.
+
+nfsd_start() {
+  # Sanity checks.  Exit if there's no /etc/exports, or if there aren't any
+  # shares defined in it.
+  if [ ! -r /etc/exports ]; then # no config file, exit:
+    exit
+  elif ! grep -v '^#' /etc/exports | grep '/' 1> /dev/null 2> /dev/null ; then
+    exit # no uncommented shares in /etc/exports
+  fi
+
+  # First, make sure the nfsd kernel module is loaded.  You can comment this
+  # part out if you've built nfsd support directly into the kernel.
+  if [ -z "`/sbin/lsmod | grep "^nfsd "`" ]; then
+    /sbin/modprobe nfsd
+  fi
+
+  # For kernels newer than 2.4.x, use the new way of handling nfs client requests.
+  if [ ! "$(/bin/uname -r | /bin/cut -f 1,2 -d .)" = "2.4" ]; then
+    if grep -wq nfsd /proc/filesystems 2> /dev/null ; then
+      if grep -vwq nfsd /proc/mounts 2> /dev/null ; then
+        /sbin/mount -t nfsd nfsd /proc/fs/nfs 2> /dev/null
+      fi
+    fi
+  fi
+
+  # If basic RPC services are not running, start them:
+  if ! ps axc | grep -q rpc.statd ; then
+    if [ -r /etc/rc.d/rc.rpc ]; then
+      sh /etc/rc.d/rc.rpc start
+    else
+      # Sure, we tested for rpc.statd, but this is the probable cause:
+      echo "FATAL:  Can't start NFS server without portmap package."
+      sleep 5
+      exit 1
+    fi
+  fi
+
+  echo "Starting NFS server daemons:"
+
+  if [ -x /usr/sbin/exportfs ]; then
+    echo "  /usr/sbin/exportfs -r"
+    /usr/sbin/exportfs -r
+  fi
+
+  if [ -x /usr/sbin/rpc.rquotad ]; then
+    echo "  /usr/sbin/rpc.rquotad"
+    /usr/sbin/rpc.rquotad
+  fi
+
+  # Start 8 nfsd servers by default (an old Sun standard):
+  if [ -x /usr/sbin/rpc.nfsd ]; then
+    echo "  /usr/sbin/rpc.nfsd 8"
+    /usr/sbin/rpc.nfsd 8
+  fi
+
+  if [ -x /usr/sbin/rpc.mountd ]; then
+    echo "  /usr/sbin/rpc.mountd"
+    /usr/sbin/rpc.mountd
+  fi
+
+}
+
+nfsd_stop() {
+  killall rpc.mountd 2> /dev/null
+  killall nfsd 2> /dev/null
+  sleep 1
+  killall -9 nfsd 2> /dev/null # make sure :)
+  killall rpc.rquotad 2> /dev/null
+  /usr/sbin/exportfs -au 2> /dev/null
+}
+
+nfsd_restart() {
+  nfsd_stop
+  sleep 1
+  nfsd_start
+}
+
+case "$1" in
+'start')
+  nfsd_start
+  ;;
+'stop')
+  nfsd_stop
+  ;;
+'restart')
+  nfsd_restart
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+esac
diff --git a/source/n/nfs-utils/slack-desc b/source/n/nfs-utils/slack-desc
new file mode 100644
index 00000000..158b4a97
--- /dev/null
+++ b/source/n/nfs-utils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+nfs-utils: nfs-utils (Network File System daemons and utilities)
+nfs-utils:
+nfs-utils: The nfs-utils package contains the necessary daemons and utilities to
+nfs-utils: run an NFS server on Linux.
+nfs-utils:
+nfs-utils: You'll also need the portmap package to use NFS.
+nfs-utils:
+nfs-utils:
+nfs-utils:
+nfs-utils:
+nfs-utils: