diff options
Diffstat (limited to 'source/n/wpa_supplicant/config/dot.config')
| -rw-r--r-- | source/n/wpa_supplicant/config/dot.config | 619 |
1 files changed, 587 insertions, 32 deletions
diff --git a/source/n/wpa_supplicant/config/dot.config b/source/n/wpa_supplicant/config/dot.config index 1c7f67df..966a98c2 100644 --- a/source/n/wpa_supplicant/config/dot.config +++ b/source/n/wpa_supplicant/config/dot.config @@ -1,44 +1,599 @@ -CONFIG_AP=y -CONFIG_BACKEND=file -CONFIG_BGSCAN_SIMPLE=y -CONFIG_CTRL_IFACE=y -CONFIG_CTRL_IFACE_DBUS=y -CONFIG_CTRL_IFACE_DBUS_INTRO=y -CONFIG_CTRL_IFACE_DBUS_NEW=y -CONFIG_DEBUG_FILE=y -CONFIG_DEBUG_SYSLOG=y -CONFIG_DRIVER_NL80211=y +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# wpa_supplicant binary. All lines starting with # are ignored. Configuration +# option lines must be commented out complete, if they are not to be included, +# i.e., just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Driver interface for generic Linux wireless extensions +# Note: WEXT is deprecated in the current Linux kernel version and no new +# functionality is added to it. nl80211-based interface is the new +# replacement for WEXT and its use allows wpa_supplicant to properly control +# the driver to improve existing functionality like roaming and to support new +# functionality. CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# QCA vendor extensions to nl80211 +CONFIG_DRIVER_NL80211_QCA=y + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$<path to libnl include files> +#LIBS += -L$<path to libnl library files> + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +CONFIG_LIBNL32=y + + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for wired Ethernet drivers CONFIG_DRIVER_WIRED=y -CONFIG_EAP_AKA=y -CONFIG_EAP_FAST=y -CONFIG_EAP_GPSK=y -CONFIG_EAP_GPSK_SHA256=y -CONFIG_EAP_GTC=y -CONFIG_EAP_IKEV2=y -CONFIG_EAP_LEAP=y + +# Driver interface for MACsec capable Qualcomm Atheros drivers +#CONFIG_DRIVER_MACSEC_QCA=y + +# Driver interface for Linux MACsec drivers +CONFIG_DRIVER_MACSEC_LINUX=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Solaris libraries +#LIBS += -lsocket -ldlpi -lnsl +#LIBS_c += -lsocket + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or +# MACsec is included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. +CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-pwd (secure authentication using only a password) +#CONFIG_EAP_PWD=y + +# EAP-PAX CONFIG_EAP_PAX=y -CONFIG_EAP_PEAP=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE CONFIG_EAP_SAKE=y -CONFIG_EAP_TLS=y + +# EAP-GPSK +CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) CONFIG_EAP_TNC=y -CONFIG_EAP_TTLS=y -CONFIG_IBSS_RSN=y -CONFIG_IEEE80211N=y -CONFIG_IEEE80211R=y -CONFIG_IEEE80211W=y -CONFIG_IEEE8021X_EAPOL=y -CONFIG_LIBNL32=y -CONFIG_P2P=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y +# Enable WPS external registrar functionality +#CONFIG_WPS_ER=y +# Disable credentials for an open network by default when acting as a WPS +# registrar. +#CONFIG_WPS_REG_DISABLE_OPEN=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y + +# EAP-IKEv2 +CONFIG_EAP_IKEV2=y + +# EAP-EKE +#CONFIG_EAP_EKE=y + +# MACsec +CONFIG_MACSEC=y + +# Peerkey support: CONFIG_PEERKEY=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) CONFIG_PKCS12=y -CONFIG_READLINE=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. CONFIG_SMARTCARD=y -CONFIG_TLS_DEFAULT_CIPHERS="PROFILE=SYSTEM:3DES" + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +#CONFIG_HT_OVERRIDES=y + +# Support VHT overrides (disable VHT, mask MCS rates, etc.) +#CONFIG_VHT_OVERRIDES=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# udp6 = UDP IPv6 sockets using localhost (::1) +# named_pipe = Windows Named Pipe (default for Windows) +# udp-remote = UDP sockets with remote access (only for tests systems/purpose) +# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +CONFIG_READLINE=y + +# Include internal line edit mode in wpa_cli. This can be used as a replacement +# for GNU Readline to provide limited command line editing and history support. +#CONFIG_WPA_CLI_EDIT=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operating system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +#CONFIG_ELOOP=eloop + +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + +# Should we use kqueue instead of select? Select is used by default. +#CONFIG_ELOOP_KQUEUE=y + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# Disable Linux packet socket workaround applicable for station interface +# in a bridge for EAPOL frames. This should be uncommented only if the kernel +# is known to not have the regression issue in packet socket behavior with +# bridge interfaces (commit 'bridge: respect RFC2863 operational state')'). +#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y + +# IEEE 802.11w (management frame protection), also known as PMF +# Driver support is also needed for IEEE 802.11w. +CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS +# internal = Internal TLSv1 implementation (experimental) +# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=openssl + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. It should be noted that some existing TLS v1.0 -based +# implementation may not be compatible with TLS v1.1 message (ClientHello is +# sent prior to negotiating which version will be used) +CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. It should be +# noted that some existing TLS v1.0 -based implementation may not be compatible +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version +# will be used) +#CONFIG_TLSV12=y + +# Select which ciphers to use by default with OpenSSL if the user does not +# specify them. +#CONFIG_TLS_DEFAULT_CIPHERS="PROFILE=SYSTEM:3DES" +CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT@SECLEVEL=1" + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode +CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +CONFIG_DEBUG_FILE=y + +# Send debug messages to syslog instead of stdout +CONFIG_DEBUG_SYSLOG=y +# Set syslog facility for debug messages +#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON + +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + +# Add support for writing debug log to Android logcat instead of standard +# output +#CONFIG_ANDROID_LOG=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, uncomment these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, uncomment these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +# wpa_supplicant depends on strong random number generation being available +# from the operating system. os_get_random() function is used to fetch random +# data when needed, e.g., for key generation. On Linux and BSD systems, this +# works by reading /dev/urandom. It should be noted that the OS entropy pool +# needs to be properly initialized before wpa_supplicant is started. This is +# important especially on embedded devices that do not have a hardware random +# number generator and may by default start up with minimal entropy available +# for random number generation. +# +# As a safety net, wpa_supplicant is by default trying to internally collect +# additional entropy for generating random data to mix in with the data fetched +# from the OS. This by itself is not considered to be very strong, but it may +# help in cases where the system pool is not initialized properly. However, it +# is very strongly recommended that the system pool is initialized with enough +# entropy either by using hardware assisted random number generator or by +# storing state over device reboots. +# +# wpa_supplicant can be configured to maintain its own entropy store over +# restarts to enhance random number generation. This is not perfect, but it is +# much more secure than using the same sequence of random numbers after every +# reboot. This can be enabled with -e<entropy file> command line option. The +# specified file needs to be readable and writable by wpa_supplicant. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal wpa_supplicant random pool can be +# disabled. This will save some in binary size and CPU use. However, this +# should only be considered for builds that are known to be used on devices +# that meet the requirements described above. +#CONFIG_NO_RANDOM_POOL=y + +# IEEE 802.11n (High Throughput) support (mainly for AP mode) +CONFIG_IEEE80211N=y + +# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) +# (depends on CONFIG_IEEE80211N) +CONFIG_IEEE80211AC=y + +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks (GAS/ANQP to learn more about the networks and network +# selection based on available credentials). +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Enable interface matching in wpa_supplicant +#CONFIG_MATCH_IFACE=y + +# Disable roaming in wpa_supplicant +#CONFIG_NO_ROAMING=y + +# AP mode operations with wpa_supplicant +# This can be used for controlling AP mode operations with wpa_supplicant. It +# should be noted that this is mainly aimed at simple cases like +# WPA2-Personal while more complex configurations like WPA2-Enterprise with an +# external RADIUS server can be supported with hostapd. +CONFIG_AP=y + +# P2P (Wi-Fi Direct) +# This can be used to enable P2P support in wpa_supplicant. See README-P2P for +# more information on P2P operations. +CONFIG_P2P=y + +# Enable TDLS support +#CONFIG_TDLS=y + +# Wi-Fi Direct +# This can be used to enable Wi-Fi Direct extensions for P2P using an external +# program to control the additional information exchanges in the messages. CONFIG_WIFI_DISPLAY=y -CONFIG_WPS=y -#CONFIG_MACSEC=y -#CONFIG_DRIVER_MACSEC_LINUX=y + +# Autoscan +# This can be used to enable automatic scan support in wpa_supplicant. +# See wpa_supplicant.conf for more information on autoscan usage. +# +# Enabling directly a module will enable autoscan support. +# For exponential module: +#CONFIG_AUTOSCAN_EXPONENTIAL=y +# For periodic module: +#CONFIG_AUTOSCAN_PERIODIC=y + +# Password (and passphrase, etc.) backend for external storage +# These optional mechanisms can be used to add support for storing passwords +# and other secrets in external (to wpa_supplicant) location. This allows, for +# example, operating system specific key storage to be used +# +# External password backend for testing purposes (developer use) +#CONFIG_EXT_PASSWORD_TEST=y + +# Enable Fast Session Transfer (FST) +#CONFIG_FST=y + +# Enable CLI commands for FST testing +#CONFIG_FST_TEST=y + +# OS X builds. This is only for building eapol_test. +#CONFIG_OSX=y + +# Automatic Channel Selection +# This will allow wpa_supplicant to pick the channel automatically when channel +# is set to "0". +# +# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative +# to "channel=0". This would enable us to eventually add other ACS algorithms in +# similar way. +# +# Automatic selection is currently only done through initialization, later on +# we hope to do background checks to keep us moving to more ideal channels as +# time goes by. ACS is currently only supported through the nl80211 driver and +# your driver must have survey dump capability that is filled by the driver +# during scanning. +# +# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with +# a newly to create wpa_supplicant.conf variable acs_num_scans. +# +# Supported ACS drivers: +# * ath9k +# * ath5k +# * ath10k +# +# For more details refer to: +# http://wireless.kernel.org/en/users/Documentation/acs +#CONFIG_ACS=y + +# Support Multi Band Operation +#CONFIG_MBO=y + +# Fast Initial Link Setup (FILS) (IEEE 802.11ai) +# Note: This is an experimental and not yet complete implementation. This +# should not be enabled for production use. +#CONFIG_FILS=y +# FILS shared key authentication with PFS +#CONFIG_FILS_SK_PFS=y + +# Support RSN on IBSS networks +# This is needed to be able to use mode=1 network profile with proto=RSN and +# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None). +CONFIG_IBSS_RSN=y + +# External PMKSA cache control +# This can be used to enable control interface commands that allow the current +# PMKSA cache entries to be fetched and new entries to be added. +#CONFIG_PMKSA_CACHE_EXTERNAL=y + +# Mesh Networking (IEEE 802.11s) +#CONFIG_MESH=y + +# Background scanning modules +# These can be used to request wpa_supplicant to perform background scanning +# operations for roaming within an ESS (same SSID). See the bgscan parameter in +# the wpa_supplicant.conf file for more details. +# Periodic background scans based on signal strength +CONFIG_BGSCAN_SIMPLE=y +# Learn channels used by the network and try to avoid bgscans on other +# channels (experimental) +#CONFIG_BGSCAN_LEARN=y + +# Opportunistic Wireless Encryption (OWE) +# Experimental implementation of draft-harkins-owe-07.txt +#CONFIG_OWE=y |