7 files changed, 418 insertions, 0 deletions
diff --git a/source/n/yptools/nsswitch.conf-nis b/source/n/yptools/nsswitch.conf-nis
new file mode 100644
index 00000000..8f0805f0
--- /dev/null
+++ b/source/n/yptools/nsswitch.conf-nis
@@ -0,0 +1,45 @@
+#
+# /etc/nsswitch.conf
+#
+# This is an example Name Service Switch config file with NIS+ and NIS
+# enabled. If you use these services, you can simply copy this file to
+# /etc/nsswitch.conf instead of doing a lot of editing.
+#
+# This file should be sorted with the most-used services at the beginning.
+#
+# The entry '[NOTFOUND=return]' means that the search for an
+# entry should stop if the search in the previous entry turned
+# up nothing. Note that if the search failed due to some other reason
+# (like no NIS server responding) then the search continues with the
+# next entry.
+#
+# Legal entries are:
+#
+#      nisplus or nis+         Use NIS+ (NIS version 3)
+#      nis or yp               Use NIS (NIS version 2), also called YP
+#      dns                     Use DNS (Domain Name Service)
+#      files                   Use the local files
+#      [NOTFOUND=return]       Stop searching if not found so far
+#
+
+passwd:     files nisplus nis
+shadow:     files nisplus nis
+group:      files nisplus nis
+
+hosts:      files nisplus nis dns
+
+services:   nisplus [NOTFOUND=return] files
+networks:   nisplus [NOTFOUND=return] files
+protocols:  nisplus [NOTFOUND=return] files
+rpc:        nisplus [NOTFOUND=return] files
+ethers:     nisplus [NOTFOUND=return] files
+netmasks:   nisplus [NOTFOUND=return] files     
+bootparams: nisplus [NOTFOUND=return] files
+
+netgroup:   nisplus
+
+publickey:  nisplus
+
+automount:  files nisplus
+aliases:    files nisplus
+
diff --git a/source/n/yptools/rc.yp b/source/n/yptools/rc.yp
new file mode 100644
index 00000000..4c3b8dec
--- /dev/null
+++ b/source/n/yptools/rc.yp
@@ -0,0 +1,58 @@
+#!/bin/sh
+# /etc/rc.d/rc.yp
+#
+# Start NIS (Network Information Service).  NIS provides network-wide
+# distribution of hostname, username, and other information databases.
+# After configuring NIS, you will need to uncomment the parts of this
+# script that you want to run.
+#
+# NOTE: for detailed information about setting up NIS, see the
+# documentation in /usr/doc/yp-tools, /usr/doc/ypbind,
+# /usr/doc/ypserv, and /usr/doc/Linux-HOWTOs/NIS-HOWTO.
+
+# # First, we must setup the NIS domainname.  NOTE: this is not necessarily
+# # the same as your DNS domainname, set in /etc/resolv.conf.  The NIS
+# # domainname is the name of a domain served by your NIS server.
+# 
+# if [ -r /etc/defaultdomain ]; then
+#   nisdomainname `cat /etc/defaultdomain`
+# fi
+#
+# # NIS SERVER CONFIGURATION:
+# # If you are the master server for the NIS domain, you must run ypserv to
+# # service clients on the domain.
+# if [ -x /usr/sbin/ypserv ]; then
+#   echo "Starting NIS server:  /usr/sbin/ypserv"
+#   /usr/sbin/ypserv
+# fi
+#
+# # If you are the master server for the NIS domain, you must also run
+# # rpc.yppasswdd, which is the RPC server that lets users change their
+# # passwords.  You might also want users to be able to change their shell
+# # and GECOS information, in which case you should comment out the first
+# # yppasswdd line and uncomment out the second one.
+# if [ -x /usr/sbin/rpc.yppasswdd ]; then
+#   echo "Starting NIS master password server:  /usr/sbin/rpc.yppasswdd"
+#   /usr/sbin/rpc.yppasswdd
+#   # echo "Starting NIS master password server:  /usr/sbin/rpc.yppasswdd -e chsh -e chfn"
+#   # /usr/sbin/rpc.yppasswdd -e chsh -e chfn
+# fi
+#
+# # If you have NIS slave servers, you might also want to start up
+# # rpc.ypxfrd, which transfers changes in the NIS domain to slave servers.
+# # Alternatively, rpc.ypxfrd can be run out of inetd.
+# if [ -x /usr/sbin/rpc.ypxfrd ]; then
+#   echo "Starting NIS transfer server:  /usr/sbin/rpc.ypxfrd"
+#   /usr/sbin/rpc.ypxfrd
+# fi
+#
+# # NIS CLIENT CONFIGURATION:
+# # If you are a NIS client, all you need to do is run ypbind, which will
+# # broadcast across the network to find a server.  Your NIS server might
+# # also be a client.
+# if [ -d /var/yp ]; then
+#   echo "Starting NIS services:  /usr/sbin/ypbind -broadcast"
+#   /usr/sbin/ypbind -broadcast
+# fi
+#
+# # Done setting up NIS.
diff --git a/source/n/yptools/slack-desc b/source/n/yptools/slack-desc
new file mode 100644
index 00000000..bedfb39e
--- /dev/null
+++ b/source/n/yptools/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+yptools: yptools (NIS servers and clients)
+yptools:
+yptools: NIS stands for Network Information Service.  NIS is usually used to
+yptools: provide /etc/passwd and /etc/group information throughout the network.
+yptools: Most Sun-based networks run NIS, and Linux machines can take full
+yptools: advantage of existing NIS service or provide NIS service themselves.
+yptools:
+yptools:
+yptools:
+yptools:
+yptools:
diff --git a/source/n/yptools/yp-tools-2.9.tar.bz2.sign b/source/n/yptools/yp-tools-2.9.tar.bz2.sign
new file mode 100644
index 00000000..2eaf4b97
--- /dev/null
+++ b/source/n/yptools/yp-tools-2.9.tar.bz2.sign
@@ -0,0 +1,8 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.2.1 (GNU/Linux)
+Comment: See http://www.kernel.org/signature.html for info
+
+iD8DBQBA1tX5yGugalF9Dw4RApxKAJ4wnAJLtV+fLyqydt6C7/jlHI0S+ACeN8d9
+z4e9NxBySBZBdFi8xwGxHTo=
+=JakC
+-----END PGP SIGNATURE-----
diff --git a/source/n/yptools/ypbind-mt-1.19.1.tar.bz2.sign b/source/n/yptools/ypbind-mt-1.19.1.tar.bz2.sign
new file mode 100644
index 00000000..183edfae
--- /dev/null
+++ b/source/n/yptools/ypbind-mt-1.19.1.tar.bz2.sign
@@ -0,0 +1,8 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.2.6 (GNU/Linux)
+Comment: See http://www.kernel.org/signature.html for info
+
+iD8DBQBCyRFDyGugalF9Dw4RAlOUAJ4kDj2kmYi2cVZqf0dLBlwexfqWhwCfTORG
+5qMKKLSrKQ8Mx/1l/ffOmDk=
+=zaLU
+-----END PGP SIGNATURE-----
diff --git a/source/n/yptools/ypserv-2.18.tar.bz2.sign b/source/n/yptools/ypserv-2.18.tar.bz2.sign
new file mode 100644
index 00000000..017a6d21
--- /dev/null
+++ b/source/n/yptools/ypserv-2.18.tar.bz2.sign
@@ -0,0 +1,8 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.2.6 (GNU/Linux)
+Comment: See http://www.kernel.org/signature.html for info
+
+iD8DBQBC3lhmyGugalF9Dw4RArUaAJwP88PBcrq6A8W7600Aa1MOIeySugCfW02y
+jYf0vlXo93Vs13VQWcCzzo0=
+=ZIYE
+-----END PGP SIGNATURE-----
diff --git a/source/n/yptools/yptools.SlackBuild b/source/n/yptools/yptools.SlackBuild
new file mode 100755
index 00000000..96f21724
--- /dev/null
+++ b/source/n/yptools/yptools.SlackBuild
@@ -0,0 +1,272 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+# Package version number:
+VERSION=2.9
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+YPTOOLS=$VERSION
+YPBINDMT=1.19.1
+#YPMAKE=0.11
+YPSERV=2.18
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-yptools
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+echo "+==============+"
+echo "| yp-tools-$YPTOOLS |"
+echo "+==============+"
+cd $TMP
+mkdir -p $PKG/etc
+# Add etc/nsswitch.conf-nis as a full NIS+ example config file:
+zcat $CWD/nsswitch.conf-nis.gz > $PKG/etc/nsswitch.conf-nis.new
+rm -rf yp-tools-$YPTOOLS
+tar xvf $CWD/yp-tools-$YPTOOLS.tar.bz2 || exit 1
+cd yp-tools-$YPTOOLS || exit 1
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --disable-domainname \
+  $ARCH-slackware-linux
+# Don't ask
+make clean
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --disable-domainname \
+  $ARCH-slackware-linux
+make CFLAGS="$SLKCFLAGS" || exit 1
+mkdir -p $PKG/var/yp
+cat etc/nicknames > $PKG/var/yp/nicknames.new
+mkdir -p $PKG/usr/share/locale/de/LC_MESSAGES
+cat po/de.gmo > $PKG/usr/share/locale/de/LC_MESSAGES/yp-tools.mo
+cd src
+mkdir -p $PKG/usr/bin
+cat ypcat > $PKG/usr/bin/ypcat
+cat ypmatch > $PKG/usr/bin/ypmatch
+cat yppasswd > $PKG/usr/bin/yppasswd
+cat ypwhich > $PKG/usr/bin/ypwhich
+( cd $PKG/usr/bin
+  chmod 755 ypcat ypmatch yppasswd ypwhich )
+( cd $PKG/usr/bin
+  rm -rf ypchfn ypchsh
+  ln -sf yppasswd ypchfn
+  ln -sf yppasswd ypchsh )
+mkdir -p $PKG/usr/sbin
+cat yppoll > $PKG/usr/sbin/yppoll
+cat ypset > $PKG/usr/sbin/ypset
+( cd $PKG/usr/sbin
+  chmod 755 yppoll ypset )
+cd ../man
+mkdir -p $PKG/usr/man/man{1,5,8}
+cat nicknames.5 | gzip -9c > $PKG/usr/man/man5/nicknames.5.gz
+for file in *.1 ; do
+  cat $file | gzip -9c > $PKG/usr/man/man1/$file.gz
+done
+for file in *.8 ; do
+  cat $file | gzip -9c > $PKG/usr/man/man8/$file.gz
+done
+cd ..
+mkdir -p $PKG/usr/doc/yp-tools-$YPTOOLS
+cp -a \
+  ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS TODO \
+  $PKG/usr/doc/yp-tools-$YPTOOLS
+chown -R root:root $PKG/usr/doc/yp-tools-$YPTOOLS
+chmod 644 $PKG/usr/doc/yp-tools-$YPTOOLS/*
+
+echo "+================+"
+echo "| ypbind-mt-$YPBINDMT |"
+echo "+================+"
+cd $TMP
+rm -rf ypbind-mt-$YPBINDMT
+tar xvf $CWD/ypbind-mt-$YPBINDMT.tar.bz2 || exit 1
+cd ypbind-mt-$YPBINDMT || exit 1
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  $ARCH-slackware-linux
+# Hard to believe how sloppy these tarballs are.  This is why I got complaints
+# that YP didn't work but it was "fixed with a simple recompile."
+make clean
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  $ARCH-slackware-linux
+make CFLAGS="$SLKCFLAGS" || exit 1
+mkdir -p $PKG/etc
+cat etc/yp.conf > $PKG/etc/yp.conf.new
+cat src/ypbind > $PKG/usr/sbin/ypbind
+chmod 755 $PKG/usr/sbin/ypbind
+cat man/yp.conf.5 | gzip -9c > $PKG/usr/man/man5/yp.conf.5.gz
+cat man/ypbind.8 | gzip -9c > $PKG/usr/man/man8/ypbind.8.gz
+mkdir -p $PKG/usr/share/locale/de/LC_MESSAGES
+cat po/de.gmo > $PKG/usr/share/locale/de/LC_MESSAGES/ypbind-mt.mo
+mkdir -p $PKG/usr/doc/ypbind-mt-$YPBINDMT
+cp -a \
+  ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS TODO \
+  $PKG/usr/doc/ypbind-mt-$YPBINDMT
+chown root:root $PKG/usr/doc/ypbind-mt-$YPBINDMT/*
+chmod 644 $PKG/usr/doc/ypbind-mt-$YPBINDMT/*
+
+# OBSOLETE (I don't see anyone packaging this anymore...  inform me if it still
+# works and you use and care about it)
+#echo "+=============+"
+#echo "| ypmake-$YPMAKE |"
+#echo "+=============+"
+#cd $TMP
+#rm -rf ypmake-$YPMAKE
+#tar xvf $CWD/ypmake-$YPMAKE.tar.bz2 || exit 1
+#cd ypmake-$YPMAKE || exit 1
+#./configure
+## I'm just not taking chances with the cleanliness of these sources anymore...
+#make clean
+#./configure
+#make
+#cat ypmake > $PKG/usr/sbin/ypmake
+#chmod 755 $PKG/usr/sbin/ypmake
+#mkdir -p $PKG/usr/lib/yp/ypmake
+#install -o root -g root -m 644 aliases arrays automount config ethers group \
+  #gshadow hosts netgroup netid networks passwd protocols publickey rpc \
+  #services shadow ypservers $PKG/usr/lib/yp/ypmake
+#cat ypmake.conf.sample > $PKG/var/yp/ypmake.conf.new
+#cat ypmake.conf.man | gzip -9c > $PKG/usr/man/man5/ypmake.conf.5.gz
+#cat ypmake.man | gzip -9c > $PKG/usr/man/man8/ypmake.8.gz
+#mkdir -p $PKG/usr/doc/ypmake-$YPMAKE
+#cp -a CHANGES README TODO $PKG/usr/doc/ypmake-$YPMAKE
+#chmod 644 $PKG/usr/doc/ypmake-$YPMAKE/*
+#chown root:root $PKG/usr/doc/ypmake-$YPMAKE/*
+
+echo "+============+"
+echo "| ypserv-$YPSERV |"
+echo "+============+"
+cd $TMP
+rm -rf ypserv-$YPSERV
+tar xvf $CWD/ypserv-$YPSERV.tar.bz2 || exit 1
+cd ypserv-$YPSERV || exit 1
+# --with-ndbm=yes 
+# Support for this was discontinued upstream
+# --enable-tcp-wrapper
+./configure \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-fqdn \
+  --enable-yppasswd \
+  $ARCH-slackware-linux
+make clean
+./configure \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-fqdn \
+  --enable-yppasswd \
+  $ARCH-slackware-linux
+make CFLAGS="$SLKCFLAGS" || exit 1
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/yp
+( cd scripts
+  for file in create_printcap match_printcap pwupdate ypinit ypxfr_1perday ypxfr_1perhour ypxfr_2perday ; do
+    cat $file > $PKG/usr/lib${LIBDIRSUFFIX}/yp/$file
+    chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/yp/$file
+  done 
+  for file in pwupdate.8 ypinit.8 ; do
+    gzip -9c $file > $PKG/usr/man/man8/$file.gz
+  done )
+for FILE in makedbm mknetid revnetgroup yphelper ypxfr ; do
+  ( cd $FILE
+    cat $FILE > $PKG/usr/lib${LIBDIRSUFFIX}/yp/$FILE
+    chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/yp/$FILE
+    cat ${FILE}.8 | gzip -9c > $PKG/usr/man/man8/${FILE}.8.gz )
+done
+cat rpc.ypxfrd/ypxfrd.8 | gzip -9c > $PKG/usr/man/man8/ypxfrd.8.gz
+for FILE in ypserv rpc.yppasswdd rpc.ypxfrd yppush ; do
+  ( cd $FILE
+    cat $FILE > $PKG/usr/sbin/$FILE
+    chmod 755 $PKG/usr/sbin/$FILE
+    cat ${FILE}.8 | gzip -9c > $PKG/usr/man/man8/${FILE}.8.gz )
+done
+cat rpc.yppasswdd/yppasswdd.8 | gzip -9c > $PKG/usr/man/man8/yppasswdd.8.gz
+cat scripts/ypMakefile > $PKG/var/yp/Makefile.new
+cat etc/securenets > $PKG/var/yp/securenets.new
+echo "# This file is part of the YP server package -- see 'man netgroup'" \
+ > $PKG/etc/netgroup.new
+cat etc/netgroup >> $PKG/etc/netgroup.new
+cat etc/netgroup.5 | gzip -9c > $PKG/usr/man/man5/netgroup.5.gz
+cat etc/ypserv.conf.5 | gzip -9c > $PKG/usr/man/man5/ypserv.conf.5.gz
+mkdir -p $PKG/usr/include/rpcsvc
+cat lib/ypxfrd.x > $PKG/usr/include/rpcsvc/ypxfrd.x
+mkdir -p $PKG/usr/doc/ypserv-$YPSERV
+cp -a \
+  AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS TODO \
+  $PKG/usr/doc/ypserv-$YPSERV
+chmod 644 $PKG/usr/doc/ypserv-$YPSERV/*
+chown root:root $PKG/usr/doc/ypserv-$YPSERV/*
+
+mkdir -p $PKG/etc/rc.d
+zcat $CWD/rc.yp.gz > $PKG/etc/rc.d/rc.yp.new
+chmod 755 $PKG/etc/rc.d/rc.yp.new
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# install script and package description:
+mkdir -p $PKG/install
+cat << EOF > $PKG/install/doinst.sh
+config() {
+  NEW="\$1"
+  OLD="\`dirname \$NEW\`/\`basename \$NEW .new\`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\`cat \$OLD | md5sum\`" = "\`cat \$NEW | md5sum\`" ]; then # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/nsswitch.conf-nis.new
+config etc/netgroup.new
+config etc/yp.conf.new
+config etc/rc.d/rc.yp.new
+config var/yp/nicknames.new
+config var/yp/Makefile.new
+config var/yp/securenets.new
+rm -f etc/nsswitch.conf.new etc/nsswitch.conf-nis.new etc/netgroup.new etc/yp.conf.new var/yp/nicknames.new var/yp/Makefile.new var/yp/securenets.new
+EOF
+
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/yptools-$VERSION-$ARCH-$BUILD.txz
+