summaryrefslogtreecommitdiff
path: root/source/n
diff options
context:
space:
mode:
Diffstat (limited to 'source/n')
-rw-r--r--source/n/gnupg2/slack-desc2
-rw-r--r--source/n/network-scripts/0001-no_hostname_in_networkmanager_conf.diff13
-rw-r--r--source/n/network-scripts/0002-set_broadcast_address_and_flush_ip_after_if_down.diff22
-rw-r--r--source/n/network-scripts/0003-netconfig-typos-and-set-NM-default.diff165
-rw-r--r--source/n/network-scripts/manpages/rc.inet1.81
-rw-r--r--source/n/network-scripts/manpages/rc.inet1.conf.514
-rwxr-xr-xsource/n/network-scripts/network-scripts.SlackBuild11
-rw-r--r--source/n/network-scripts/scripts/netconfig62
-rw-r--r--source/n/network-scripts/scripts/rc.inet140
-rw-r--r--source/n/network-scripts/scripts/rc.inet1.conf5
-rwxr-xr-xsource/n/ulogd/ulogd.SlackBuild4
-rw-r--r--source/n/ulogd/ulogd.logrotate7
12 files changed, 88 insertions, 258 deletions
diff --git a/source/n/gnupg2/slack-desc b/source/n/gnupg2/slack-desc
index 015fbbba..77f4bd04 100644
--- a/source/n/gnupg2/slack-desc
+++ b/source/n/gnupg2/slack-desc
@@ -14,6 +14,6 @@ gnupg2: an advanced key management facility and is compliant with the proposed
gnupg2: OpenPGP Internet standard as described in RFC2440 and the S/MIME
gnupg2: standard as described by several RFCs.
gnupg2:
-gnupg2: GnuPG 2.0 is the stable version of GnuPG integrating support for
+gnupg2: GnuPG 2.x is the stable version of GnuPG integrating support for
gnupg2: OpenPGP and S/MIME. It does not conflict with an installed 1.4.x
gnupg2: OpenPGP-only version.
diff --git a/source/n/network-scripts/0001-no_hostname_in_networkmanager_conf.diff b/source/n/network-scripts/0001-no_hostname_in_networkmanager_conf.diff
deleted file mode 100644
index 8ce7600c..00000000
--- a/source/n/network-scripts/0001-no_hostname_in_networkmanager_conf.diff
+++ /dev/null
@@ -1,13 +0,0 @@
---- ./netconfig.orig 2017-11-26 13:34:37.652627697 -0600
-+++ ./netconfig 2018-02-15 20:01:26.844174383 -0600
-@@ -362,10 +362,6 @@
-
- # Write the hostname with domain to /etc/HOSTNAME:
- echo $HOSTNM.$DOMAIN > etc/HOSTNAME
--# Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
--if [ -w etc/NetworkManager/NetworkManager.conf ]; then
-- sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
--fi
-
- dialog --title "CONFIGURATION TYPE FOR '$HOSTNM.$DOMAIN'" \
- --default-item DHCP \
diff --git a/source/n/network-scripts/0002-set_broadcast_address_and_flush_ip_after_if_down.diff b/source/n/network-scripts/0002-set_broadcast_address_and_flush_ip_after_if_down.diff
deleted file mode 100644
index e963115d..00000000
--- a/source/n/network-scripts/0002-set_broadcast_address_and_flush_ip_after_if_down.diff
+++ /dev/null
@@ -1,22 +0,0 @@
---- ./rc.inet1.orig 2017-11-26 22:48:14.650274588 -0600
-+++ ./rc.inet1 2018-02-15 20:42:45.731997047 -0600
-@@ -215,8 +215,8 @@
- else # bring up interface using a static IP address
- if [ -n "${IPADDR[$i]}" ]; then # skip unconfigured interfaces
- # Set up the network card:
-- echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}" | $LOGGER
-- /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}
-+ echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} broadcast + dev ${1}" | $LOGGER
-+ /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} broadcast + dev ${1}
- if /sbin/ip link show dev ${1} | grep -wq "state DOWN" ; then
- /sbin/ip link set dev ${1} up # Bring up interface
- fi
-@@ -268,6 +268,8 @@
- if [ -n "${BRNICS[$i]}" ]; then
- br_close $i
- fi
-+ # Flush the address from the interface:
-+ ip address flush dev ${1}
- fi
- }
-
diff --git a/source/n/network-scripts/0003-netconfig-typos-and-set-NM-default.diff b/source/n/network-scripts/0003-netconfig-typos-and-set-NM-default.diff
deleted file mode 100644
index cd6bf2cc..00000000
--- a/source/n/network-scripts/0003-netconfig-typos-and-set-NM-default.diff
+++ /dev/null
@@ -1,165 +0,0 @@
---- ./netconfig.orig 2018-02-21 21:21:31.000000000 -0600
-+++ ./netconfig 2018-04-12 14:07:10.137023035 -0500
-@@ -11,7 +11,7 @@
- #
-
- # If we're doing loopback, we don't want 127.0.0.1 and 255.255.255.0 in
--# rc.inet1.conf... it's better to leave the values null. However, since
-+# rc.inet1.conf... it's better to leave the values null. However, since
- # we use the IP in other places, we need to make a copy for here.
- RCIPCOPY=$IPADDR
- RCMASKCOPY=$NETMASK
-@@ -68,7 +68,7 @@
- # Default gateway IP address:
- GATEWAY="$GATEWAY"
-
--# Change this to "yes" for debugging output to stdout. Unfortunately,
-+# Change this to "yes" for debugging output to stdout. Unfortunately,
- # /sbin/hotplug seems to disable stdout so you'll only see debugging output
- # when rc.inet1 is called directly.
- DEBUG_ETH_UP="no"
-@@ -103,8 +103,8 @@
- #VIRTIFUSER[1]="someuser"
- #VIRTIFGROUP[1]="somegroup"
-
--## Example config information for wlan0. Uncomment the lines you need and fill
--## in your data. (You may not need all of these for your wireless network)
-+## Example config information for wlan0. Uncomment the lines you need and fill
-+## in your data. (You may not need all of these for your wireless network)
- #IFNAME[4]="wlan0"
- #IPADDR[4]=""
- #NETMASK[4]=""
-@@ -173,7 +173,7 @@
- /bin/cat <<EOF >$ETCNETWORKS
- #
- # networks This file describes a number of netname-to-address
--# mappings for the TCP/IP subsystem. It is mostly
-+# mappings for the TCP/IP subsystem. It is mostly
- # used at boot time, when no name servers are running.
- #
-
-@@ -192,14 +192,14 @@
- /bin/cat << EOF > $HOSTS
- #
- # hosts This file describes a number of hostname-to-address
--# mappings for the TCP/IP subsystem. It is mostly
-+# mappings for the TCP/IP subsystem. It is mostly
- # used at boot time, when no name servers are running.
- # On small systems, this file can be used instead of a
- # "named" name server. Just add the names, addresses
- # and any aliases to this file...
- #
- # By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
--# should NEVER be named with the name of the machine. It causes problems
-+# should NEVER be named with the name of the machine. It causes problems
- # for some (stupid) programs, irc and reputedly talk. :^)
- #
-
-@@ -362,16 +362,21 @@
-
- # Write the hostname with domain to /etc/HOSTNAME:
- echo $HOSTNM.$DOMAIN > etc/HOSTNAME
-+## OBSOLETE with recent NetworkManager:
-+## Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
-+#if [ -w etc/NetworkManager/NetworkManager.conf ]; then
-+# sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
-+#fi
-
- dialog --title "CONFIGURATION TYPE FOR '$HOSTNM.$DOMAIN'" \
----default-item DHCP \
-+--default-item NetworkManager \
- --menu \
- "Now we need to know how your machine connects to the network.\n\
- If you have an internal network card and an assigned IP address, gateway, \
--and DNS, use the 'static IP' choice to enter these values. If your IP \
-+and DNS, use the 'static IP' choice to enter these values. If your IP \
- address is assigned by a DHCP server (commonly used by cable modem and DSL \
--services), select 'DHCP'. If you do not have a network card, select \
--the 'loopback' choice. You may also select 'NetworkManager' if you would \
-+services), select 'DHCP'. If you do not have a network card, select \
-+the 'loopback' choice. You may also select 'NetworkManager' if you would \
- like to have the NetworkManager daemon automatically handle your wired and \
- wireless network interfaces (this is simple and usually works). \
- Which type of network setup would you like?" 20 70 4 \
-@@ -389,10 +394,10 @@
- if [ "$REPLY" = "DHCP" ]; then
- USE_DHCP="yes"
- dialog --title "SET DHCP HOSTNAME" --inputbox "Some network providers require \
--that the DHCP hostname be set in order to connect. If so, they'll have assigned \
-+that the DHCP hostname be set in order to connect. If so, they'll have assigned \
- a hostname to your machine, which may look something like CC-NUMBER-A (this \
--depends on your ISP). If you were assigned a DHCP hostname, please enter it \
--below. If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
-+depends on your ISP). If you were assigned a DHCP hostname, please enter it \
-+below. If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
- 2> $TMP/SeTDHCPHOST
- NEW_DHCPHOST="`cat $TMP/SeTDHCPHOST`"
- rm -f $TMP/SeTDHCPHOST
-@@ -442,7 +447,7 @@
- NETMASK=`cat $TMP/SeTnetmask`
- fi
- cat << EOF > $TMP/tempmsg
--Enter your netmask. This will generally look something
-+Enter your netmask. This will generally look something
- like this: 255.255.255.0
- Enter netmask (aaa.bbb.ccc.ddd):
- EOF
-@@ -556,8 +561,8 @@
- dialog --title "PROBE FOR NETWORK CARD?" --menu "If you like, we \
- can look to see what kind of network card you have in your machine, and \
- if we find one create an /etc/rc.d/rc.netdevice script to load the module \
--for it at boot time. There's a slight bit of danger that the probing \
--can cause problems, but it almost always works. If you'd rather configure \
-+for it at boot time. There's a slight bit of danger that the probing \
-+can cause problems, but it almost always works. If you'd rather configure \
- your system manually, you can skip the probing process and edit \
- /etc/rc.d/rc.modules or /etc/modules.conf later to have it load the right module." \
- 16 68 2 \
-@@ -601,7 +606,7 @@
- fi
- if [ ! -r /cardfound ]; then
- dialog --title "NO CARD DETECTED" --msgbox "Sorry, but no network \
--card could be probed for on your system. Some cards (like non-PCI NE2000s) \
-+card could be probed for on your system. Some cards (like non-PCI NE2000s) \
- must be supplied with the I/O address to use and can't be probed for safely. \
- You'll have to try to configure the card later by editing \
- /etc/rc.d/rc.modules or recompiling your kernel." 9 70
-@@ -621,11 +626,11 @@
- elif [ "$LOOPBACK" = "yes" -a "$NETWORKMANAGER" = "yes" ]; then
- dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
- system is now configured to use NetworkManager for
--wired and wireless network management. To set up wireless networks
-+wired and wireless network management. To set up wireless networks
- and view status, add the Network Management control panel widget to
- your KDE desktop.
-
--Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
-+Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
- RETVAL=$?
- elif [ "$USE_DHCP" = "" ]; then
- while [ 0 ]; do
-@@ -634,8 +639,8 @@
- --extra-label Edit \
- --cancel-label Restart \
- --inputmenu \
--"These are the settings you have entered. To accept them and complete \
--the networking setup, press enter. If you need to make any changes, you \
-+"These are the settings you have entered. To accept them and complete \
-+the networking setup, press enter. If you need to make any changes, you \
- can do that now (or reconfigure later using 'netconfig')." \
- 22 60 12 \
- "Hostname:" "$HOSTNM" \
-@@ -692,11 +697,11 @@
- chmod 755 etc/rc.d/rc.networkmanager
- fi
- if [ "$1" = "" ]; then
-- dialog --msgbox "Settings accepted. Basic network configuration is complete." 6 40
-+ dialog --msgbox "Settings accepted. Basic network configuration is complete." 6 40
- fi
- else
- if [ "$1" = "" ]; then
-- dialog --msgbox "Settings discarded. Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
-+ dialog --msgbox "Settings discarded. Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
- fi
- fi
-
diff --git a/source/n/network-scripts/manpages/rc.inet1.8 b/source/n/network-scripts/manpages/rc.inet1.8
index e78353a0..ac8ce6a5 100644
--- a/source/n/network-scripts/manpages/rc.inet1.8
+++ b/source/n/network-scripts/manpages/rc.inet1.8
@@ -105,6 +105,7 @@ The /etc/rc.d/rc.wireless script is not meant to be run on its own by the user!
Patrick J. Volkerding <volkerdi@slackware.com>
Eric Hameleers <alien@slackware.com>
Robby Workman <rworkman@slackware.com>
+Darren 'Tadgy' Austin <darren@afterdark.org.uk>
.SH "SEE ALSO"
.BR rc.inet1.conf(5),
.BR ip(8),
diff --git a/source/n/network-scripts/manpages/rc.inet1.conf.5 b/source/n/network-scripts/manpages/rc.inet1.conf.5
index 1f790c0a..28683177 100644
--- a/source/n/network-scripts/manpages/rc.inet1.conf.5
+++ b/source/n/network-scripts/manpages/rc.inet1.conf.5
@@ -58,7 +58,7 @@ IPADDR[1]="192.168.3.11"
.br
NETMASK[1]="255.255.255.0"
.br
-IPALIASES[1]="192.168.3.100"
+IPALIASES[1]="192.168.3.100/24"
.br
USE_DHCP[1]=""
.br
@@ -118,9 +118,11 @@ NETMASK[0]=""
(255.255.255.0 is common)
.TP
IPALIASES[0]=""
-# Space separated list of additional IP addresses to bind to the
-interface after initial configuration is complete. If USE_DHCP is
-set to `yes' then additional addresses will only be added if the
+# Space separated list of additional IP addresses to bind to the
+interface after initial configuration is complete. An optional
+netmask may be specified after the IP in the form 1.2.3.4/24. If no
+netmask is specified the default of /32 will be used. If USE_DHCP
+is set to `yes' then additional addresses will only be added if the
dhcp client invocation is successful in obtaining a primary address.
.TP
USE_DHCP[0]="yes"
@@ -145,6 +147,9 @@ MTU[0]=""
# The default MTU is 1500, but you might need 1360 when you use NAT'ed
IPSec traffic. IPv6 will likely require smaller MTUs as well
.TP
+PROMISCUOUS[0]="yes"
+# Set promiscuous mode on the interface.
+.TP
DHCP_KEEPRESOLV[0]="yes"
# If you do
.B not
@@ -249,5 +254,6 @@ to the number of network interfaces you wish to use.
Patrick J. Volkerding <volkerdi@slackware.com>
Eric Hameleers <alien@slackware.com>
Robby Workman <rworkman@slackware.com>
+Darren 'Tadgy' Austin <darren@afterdark.org.uk>
.SH "SEE ALSO"
.BR rc.inet1(8)
diff --git a/source/n/network-scripts/network-scripts.SlackBuild b/source/n/network-scripts/network-scripts.SlackBuild
index b484de1d..4f35ed36 100755
--- a/source/n/network-scripts/network-scripts.SlackBuild
+++ b/source/n/network-scripts/network-scripts.SlackBuild
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
PKGNAM=network-scripts
VERSION=${VERSION:-15.0}
ARCH=noarch
-BUILD=${BUILD:-7}
+BUILD=${BUILD:-8}
# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
# the name of the created package would be, and then exit. This information
@@ -64,15 +64,6 @@ cp -a $CWD/scripts/setup.netconfig $PKG/var/log/setup
chown root:root $PKG/var/log/setup/setup.netconfig
chmod 755 $PKG/var/log/setup/setup.netconfig
-# Apply patches until rworkman takes them up in git:
-( cd $PKG/sbin
- zcat $CWD/0001-no_hostname_in_networkmanager_conf.diff.gz | patch -p1 --verbose || exit 1
- zcat $CWD/0003-netconfig-typos-and-set-NM-default.diff.gz | patch -p1 --verbose || exit 1
-) || exit 1
-( cd $PKG/etc/rc.d
- zcat $CWD/0002-set_broadcast_address_and_flush_ip_after_if_down.diff.gz | patch -p1 --verbose rc.inet1.new || exit 1
-) || exit 1
-
# Add manpages:
mkdir -p $PKG/usr/man/man{5,8}
cat $CWD/manpages/rc.inet1.conf.5 | gzip -9c > $PKG/usr/man/man5/rc.inet1.conf.5.gz
diff --git a/source/n/network-scripts/scripts/netconfig b/source/n/network-scripts/scripts/netconfig
index 51e88bd4..5c5bf8a6 100644
--- a/source/n/network-scripts/scripts/netconfig
+++ b/source/n/network-scripts/scripts/netconfig
@@ -11,7 +11,7 @@ write_config_files() {
#
# If we're doing loopback, we don't want 127.0.0.1 and 255.255.255.0 in
-# rc.inet1.conf... it's better to leave the values null. However, since
+# rc.inet1.conf... it's better to leave the values null. However, since
# we use the IP in other places, we need to make a copy for here.
RCIPCOPY=$IPADDR
RCMASKCOPY=$NETMASK
@@ -68,7 +68,7 @@ DHCP_HOSTNAME[3]=""
# Default gateway IP address:
GATEWAY="$GATEWAY"
-# Change this to "yes" for debugging output to stdout. Unfortunately,
+# Change this to "yes" for debugging output to stdout. Unfortunately,
# /sbin/hotplug seems to disable stdout so you'll only see debugging output
# when rc.inet1 is called directly.
DEBUG_ETH_UP="no"
@@ -103,8 +103,8 @@ DEBUG_ETH_UP="no"
#VIRTIFUSER[1]="someuser"
#VIRTIFGROUP[1]="somegroup"
-## Example config information for wlan0. Uncomment the lines you need and fill
-## in your data. (You may not need all of these for your wireless network)
+## Example config information for wlan0. Uncomment the lines you need and fill
+## in your data. (You may not need all of these for your wireless network)
#IFNAME[4]="wlan0"
#IPADDR[4]=""
#NETMASK[4]=""
@@ -128,10 +128,13 @@ DEBUG_ETH_UP="no"
## Config information for wlan0:
#IFNAME[4]="wlan0" # Use a different interface name instead of
# the default 'eth4'
-#IFNAME[4]="eth0:1" # Set up an IP alias.
+#IPALIASES[4]="192.168.5.10/24" # Set up an IP alias. A netmask may be given
+ # with a /<prefix> after the IP address - if
+ # not supplied, /32 will be used as default.
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
#MTU[4]="" # The default MTU is 1500, but you might need
# 1360 when you use NAT'ed IPSec traffic.
+#PROMISCUOUS[4]="yes" # Set promiscuous mode on the interface.
#DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to
# wait for server resonse is 15 seconds, but
# you might want a shorter or longer wait.
@@ -173,7 +176,7 @@ ENDFILE
/bin/cat <<EOF >$ETCNETWORKS
#
# networks This file describes a number of netname-to-address
-# mappings for the TCP/IP subsystem. It is mostly
+# mappings for the TCP/IP subsystem. It is mostly
# used at boot time, when no name servers are running.
#
@@ -192,14 +195,14 @@ chmod 644 $ETCNETWORKS
/bin/cat << EOF > $HOSTS
#
# hosts This file describes a number of hostname-to-address
-# mappings for the TCP/IP subsystem. It is mostly
+# mappings for the TCP/IP subsystem. It is mostly
# used at boot time, when no name servers are running.
# On small systems, this file can be used instead of a
# "named" name server. Just add the names, addresses
# and any aliases to this file...
#
# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
-# should NEVER be named with the name of the machine. It causes problems
+# should NEVER be named with the name of the machine. It causes problems
# for some (stupid) programs, irc and reputedly talk. :^)
#
@@ -362,20 +365,21 @@ done
# Write the hostname with domain to /etc/HOSTNAME:
echo $HOSTNM.$DOMAIN > etc/HOSTNAME
-# Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
-if [ -w etc/NetworkManager/NetworkManager.conf ]; then
- sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
-fi
+## OBSOLETE with recent NetworkManager:
+## Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
+#if [ -w etc/NetworkManager/NetworkManager.conf ]; then
+# sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
+#fi
dialog --title "CONFIGURATION TYPE FOR '$HOSTNM.$DOMAIN'" \
---default-item DHCP \
+--default-item NetworkManager \
--menu \
"Now we need to know how your machine connects to the network.\n\
If you have an internal network card and an assigned IP address, gateway, \
-and DNS, use the 'static IP' choice to enter these values. If your IP \
+and DNS, use the 'static IP' choice to enter these values. If your IP \
address is assigned by a DHCP server (commonly used by cable modem and DSL \
-services), select 'DHCP'. If you do not have a network card, select \
-the 'loopback' choice. You may also select 'NetworkManager' if you would \
+services), select 'DHCP'. If you do not have a network card, select \
+the 'loopback' choice. You may also select 'NetworkManager' if you would \
like to have the NetworkManager daemon automatically handle your wired and \
wireless network interfaces (this is simple and usually works). \
Which type of network setup would you like?" 20 70 4 \
@@ -393,10 +397,10 @@ rm -f $TMP/reply
if [ "$REPLY" = "DHCP" ]; then
USE_DHCP="yes"
dialog --title "SET DHCP HOSTNAME" --inputbox "Some network providers require \
-that the DHCP hostname be set in order to connect. If so, they'll have assigned \
+that the DHCP hostname be set in order to connect. If so, they'll have assigned \
a hostname to your machine, which may look something like CC-NUMBER-A (this \
-depends on your ISP). If you were assigned a DHCP hostname, please enter it \
-below. If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
+depends on your ISP). If you were assigned a DHCP hostname, please enter it \
+below. If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
2> $TMP/SeTDHCPHOST
NEW_DHCPHOST="`cat $TMP/SeTDHCPHOST`"
rm -f $TMP/SeTDHCPHOST
@@ -446,7 +450,7 @@ EOF
NETMASK=`cat $TMP/SeTnetmask`
fi
cat << EOF > $TMP/tempmsg
-Enter your netmask. This will generally look something
+Enter your netmask. This will generally look something
like this: 255.255.255.0
Enter netmask (aaa.bbb.ccc.ddd):
EOF
@@ -560,8 +564,8 @@ if [ -d lib/modules/`uname -r` \
dialog --title "PROBE FOR NETWORK CARD?" --menu "If you like, we \
can look to see what kind of network card you have in your machine, and \
if we find one create an /etc/rc.d/rc.netdevice script to load the module \
-for it at boot time. There's a slight bit of danger that the probing \
-can cause problems, but it almost always works. If you'd rather configure \
+for it at boot time. There's a slight bit of danger that the probing \
+can cause problems, but it almost always works. If you'd rather configure \
your system manually, you can skip the probing process and edit \
/etc/rc.d/rc.modules or /etc/modules.conf later to have it load the right module." \
16 68 2 \
@@ -605,7 +609,7 @@ the $card.o module has been detected." 5 72
fi
if [ ! -r /cardfound ]; then
dialog --title "NO CARD DETECTED" --msgbox "Sorry, but no network \
-card could be probed for on your system. Some cards (like non-PCI NE2000s) \
+card could be probed for on your system. Some cards (like non-PCI NE2000s) \
must be supplied with the I/O address to use and can't be probed for safely. \
You'll have to try to configure the card later by editing \
/etc/rc.d/rc.modules or recompiling your kernel." 9 70
@@ -625,11 +629,11 @@ Is this correct? Press 'Yes' to continue, or 'No' to reconfigure." 0 0
elif [ "$LOOPBACK" = "yes" -a "$NETWORKMANAGER" = "yes" ]; then
dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
system is now configured to use NetworkManager for
-wired and wireless network management. To set up wireless networks
+wired and wireless network management. To set up wireless networks
and view status, add the Network Management control panel widget to
your KDE desktop.
-Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
+Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
RETVAL=$?
elif [ "$USE_DHCP" = "" ]; then
while [ 0 ]; do
@@ -638,8 +642,8 @@ elif [ "$USE_DHCP" = "" ]; then
--extra-label Edit \
--cancel-label Restart \
--inputmenu \
-"These are the settings you have entered. To accept them and complete \
-the networking setup, press enter. If you need to make any changes, you \
+"These are the settings you have entered. To accept them and complete \
+the networking setup, press enter. If you need to make any changes, you \
can do that now (or reconfigure later using 'netconfig')." \
22 60 12 \
"Hostname:" "$HOSTNM" \
@@ -696,11 +700,11 @@ if [ "$RETVAL" = "0" ]; then
chmod 755 etc/rc.d/rc.networkmanager
fi
if [ "$1" = "" ]; then
- dialog --msgbox "Settings accepted. Basic network configuration is complete." 6 40
+ dialog --msgbox "Settings accepted. Basic network configuration is complete." 6 40
fi
else
if [ "$1" = "" ]; then
- dialog --msgbox "Settings discarded. Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
+ dialog --msgbox "Settings discarded. Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
fi
fi
diff --git a/source/n/network-scripts/scripts/rc.inet1 b/source/n/network-scripts/scripts/rc.inet1
index 2f566ef8..cf9da0f4 100644
--- a/source/n/network-scripts/scripts/rc.inet1
+++ b/source/n/network-scripts/scripts/rc.inet1
@@ -1,4 +1,4 @@
-#! /bin/sh
+#!/bin/bash
# /etc/rc.d/rc.inet1
# This script is used to bring up the various network interfaces.
#
@@ -204,19 +204,28 @@ if_up() {
# 15 seconds should be a reasonable default DHCP timeout. 30 was too much.
echo "/etc/rc.d/rc.inet1: /sbin/dhcpcd -L -t ${DHCP_TIMEOUT[$i]:-15} ${DHCP_OPTIONS} ${1}" | $LOGGER
/sbin/dhcpcd -L -t ${DHCP_TIMEOUT[$i]:-15} ${DHCP_OPTIONS} ${1}
- # If the dhcpcd call succeeds, add extra IP addresses, if defined, to interface
- if [ "$?" == "0" ] && [ -n "${IPALIASES[$i]}" ]; then
- num=0
- for ipalias in ${IPALIASES[$i]}; do
- /sbin/ip address add ${ipalias}/32 dev ${1} label ${1}:${num} ;
- num=$(($num + 1))
- done
+ if [ "$?" == "0" ]; then # the dhcp call has succeeded
+ if [ -n "${IPALIASES[$i]}" ]; then
+ # Add extra IP addresses, if defined, to interface
+ num=0
+ for ipalias in ${IPALIASES[$i]}; do
+ ip="${ipalias%/*}"
+ nm="${ipalias#*/}"
+ [ -z "$nm" ] || [ "$ip" == "$nm" ] && nm="32"
+ /sbin/ip address add ${ip}/${nm} dev ${1} label ${1}:${num}
+ num=$(($num + 1))
+ done
+ fi
+ if [ "${PROMISCUOUS[$i]}" = "yes" ]; then
+ # Set promiscuous mode on the interface
+ /sbin/ip link set dev ${1} promisc on
+ fi
fi
else # bring up interface using a static IP address
if [ -n "${IPADDR[$i]}" ]; then # skip unconfigured interfaces
# Set up the network card:
- echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}" | $LOGGER
- /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}
+ echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} broadcast + dev ${1}" | $LOGGER
+ /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} broadcast + dev ${1}
if /sbin/ip link show dev ${1} | grep -wq "state DOWN" ; then
/sbin/ip link set dev ${1} up # Bring up interface
fi
@@ -224,10 +233,17 @@ if_up() {
if [ -n "${IPALIASES[$i]}" ]; then
num=0
for ipalias in ${IPALIASES[$i]}; do
- /sbin/ip address add ${ipalias}/32 dev ${1} label ${1}:${num} ;
+ ip="${ipalias%/*}"
+ nm="${ipalias#*/}"
+ [ -z "$nm" ] || [ "$ip" == "$nm" ] && nm="32"
+ /sbin/ip address add ${ip}/${nm} dev ${1} label ${1}:${num}
num=$(($num + 1))
done
fi
+ if [ "${PROMISCUOUS[$i]}" = "yes" ]; then
+ # Set promiscuous mode on the interface
+ /sbin/ip link set dev ${1} promisc on
+ fi
else
debug_log "${1} interface is not configured in /etc/rc.d/rc.inet1.conf"
fi
@@ -268,6 +284,8 @@ if_down() {
if [ -n "${BRNICS[$i]}" ]; then
br_close $i
fi
+ # Flush the address from the interface:
+ ip address flush dev ${1}
fi
}
diff --git a/source/n/network-scripts/scripts/rc.inet1.conf b/source/n/network-scripts/scripts/rc.inet1.conf
index 58766d25..551c4a70 100644
--- a/source/n/network-scripts/scripts/rc.inet1.conf
+++ b/source/n/network-scripts/scripts/rc.inet1.conf
@@ -104,10 +104,13 @@ DEBUG_ETH_UP="no"
## Config information for wlan0:
#IFNAME[4]="wlan0" # Use a different interface name instead of
# the default 'eth4'
-#IFNAME[4]="eth0:1" # Set up an IP alias.
+#IPALIASES[4]="192.168.5.10/24" # Set up an IP alias. A netmask may be given
+ # with a /<prefix> after the IP address - if
+ # not supplied, /32 will be used as default.
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
#MTU[4]="" # The default MTU is 1500, but you might need
# 1360 when you use NAT'ed IPSec traffic.
+#PROMISCUOUS[4]="yes" # Set promiscuous mode on the interface.
#DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to
# wait for server resonse is 15 seconds, but
# you might want a shorter or longer wait.
diff --git a/source/n/ulogd/ulogd.SlackBuild b/source/n/ulogd/ulogd.SlackBuild
index 1ffd0822..c1709aaf 100755
--- a/source/n/ulogd/ulogd.SlackBuild
+++ b/source/n/ulogd/ulogd.SlackBuild
@@ -26,7 +26,7 @@ cd $(dirname $0) ; CWD=$(pwd)
PKGNAM=ulogd
VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
NUMJOBS=${NUMJOBS:-" -j7 "}
@@ -103,7 +103,7 @@ cat $CWD/rc.ulogd > $PKG/etc/rc.d/rc.ulogd.new
chmod 0755 $PKG/etc/rc.d/rc.ulogd.new
mkdir -p $PKG/etc/logrotate.d
-cat ulogd.logrotate > $PKG/etc/logrotate.d/ulogd.new
+cat $CWD/ulogd.logrotate > $PKG/etc/logrotate.d/ulogd.new
find $PKG/usr/man -exec gzip -9 {} \;
diff --git a/source/n/ulogd/ulogd.logrotate b/source/n/ulogd/ulogd.logrotate
new file mode 100644
index 00000000..b3fb6d12
--- /dev/null
+++ b/source/n/ulogd/ulogd.logrotate
@@ -0,0 +1,7 @@
+/var/log/ulogd.log /var/log/ulogd.syslogemu /var/log/ulogd.pktlog /var/log/ulogd.pcap {
+ missingok
+ sharedscripts
+ postrotate
+ /bin/killall -HUP ulogd 2> /dev/null || true
+ endscript
+}
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-05 23:40:50 +0000