diff options
Diffstat (limited to 'source/t/tetex/tetex.SlackBuild')
| -rwxr-xr-x | source/t/tetex/tetex.SlackBuild | 281 |
1 files changed, 0 insertions, 281 deletions
diff --git a/source/t/tetex/tetex.SlackBuild b/source/t/tetex/tetex.SlackBuild deleted file mode 100755 index ac6ccf43..00000000 --- a/source/t/tetex/tetex.SlackBuild +++ /dev/null @@ -1,281 +0,0 @@ -#!/bin/sh - -# Copyright 2008, 2009, 2010, 2015 Patrick J. Volkerding, Sebeka, Minnesota, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - -VERSION=3.0 -BUILD=${BUILD:-10} - -# Automatically determine the architecture we're building on: -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) export ARCH=i486 ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$( uname -m ) ;; - esac -fi - -NUMJOBS=${NUMJOBS:-" -j7 "} - -CWD=$(pwd) -TMP=${TMP:-/tmp} - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" -else - SLKCFLAGS="-O2" -fi - -# There were so many local security problems with this shared fontcache -# scheme that it's not worth trying to support. It was not enabled by -# default, and newer versions of teTeX don't seem to recongnize it any -# longer either. -#export fontcache=/var/cache/fonts -#export vartexfonts=$fontcache -#mkdir -p /var/cache/fonts/pk /var/cache/fonts/source /var/cache/fonts/tfm -#chmod 1777 /var/cache/fonts /var/cache/fonts/pk \ -# /var/cache/fonts/source /var/cache/fonts/tfm - -# Safer to purge this first: -rm -rf /usr/share/texmf -rm -rf /usr/share/texmf-var -rm -rf /usr/share/texi2html - -# Make a clean new directory: -mkdir -p /usr/share/texmf -( cd /usr/share/texmf - tar xvf $CWD/tetex-texmf-$VERSION.tar.xz - chown -R root:root . - find . -type f -perm 666 -exec chmod 644 {} \; - # Change the sell-by date: - zcat $CWD/tetex.leet.diff.gz | patch -p1 --verbose || exit 1 -) -cd $TMP -rm -rf tetex-src-$VERSION -tar xvf $CWD/tetex-src-$VERSION.tar.xz -cd tetex-src-$VERSION -chown -R root:root . -find . -type f -perm 666 -exec chmod 644 {} \; - -# Fix possible xpdf overflows: -zcat $CWD/tetex.CVE-2005-3193.diff.gz | patch -p1 --verbose || exit 1 - -# /var/lib/texmf is a better font location than /var/tmp/texfonts: -zcat $CWD/tetex.var.fonts.diff.gz | patch -p1 --verbose || exit 1 - -# Even better is something in your $HOME directory: -zcat $CWD/tetex.fontcachedirinhome.diff.gz | patch -p1 --verbose || exit 1 - -# Use mkstemp() in dvipdfm: -zcat $CWD/tetex.dvipdfm.mkstemp.diff.gz | patch -p1 --verbose || exit 1 - -# Use mktemp in scripts: -zcat $CWD/tetex.scripts.mktemp.diff.gz | patch -p1 --verbose || exit 1 - -# Try to use more modern browsers. -# Attempt to use them in this order: firefox, seamonkey, mozilla, links, lynx. -zcat $CWD/tetex.browsers.diff.gz | patch -p1 --verbose || exit 1 - -# Add bplain and bamstex info to fmtutil.cnf: -zcat $CWD/tetex.amstex.fmtutil.diff.gz | patch -p1 --verbose || exit 1 - -# Don't leave texconfig junk in $TMP: -zcat $CWD/tetex.tmp.cleanup.diff.gz | patch -p1 --verbose || exit 1 - -# Fix the cpascal header so there's no conflict with getline() in the -# generated C code: -zcat $CWD/tetex.cpascal.getline.posix.2008.diff.gz | patch -p1 --verbose || exit 1 - -# Patch for libpng-1.4.0: -#zcat $CWD/tetex.png14.diff.gz | patch -p1 --verbose || exit 1 - -# Patch for libpng16: (currently causing a segfault... feel free to help :-) -#zcat $CWD/tetex.png16.diff.gz | patch -p1 --verbose || exit 1 - -# Another problem caused by getline() in glibc: -zcat $CWD/tetex.afm2tfm.getline.diff.gz | patch -p1 --verbose || exit 1 - -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure --prefix=/usr/share/texmf \ - --datadir=/usr/share \ - --disable-multiplatform \ - --disable-a4 \ - --without-dialog \ - --without-texinfo \ - --with-system-ncurses \ - --with-system-t1lib \ - --with-system-tifflib \ - --with-system-zlib \ - --with-ps=gs \ - --enable-ipc \ - --enable-freetype \ - --with-etex -# --without-texinfo # Really, it doesn't hurt to include these twice... - -# This was reported to fix a problem with newer GNU sources and "make dvi". -# It does, in fact, fix a bug where the etex binary/engine really should be -# used when etex and dvi output are requested, but the example given to me -# (which was "make dvi" in GNU binutils) also has some problems that have to -# be fixed. This confused me for a good long time. ;-) -# BTW, the fix for the binutils docs is to edit bfd.texinfo and remove that -# @tex through @end tex section near the top. Then build twice. Hit enter -# if it "sticks". -zcat $CWD/tetex.etex.diff.gz | patch -p1 --verbose || exit 1 - -make all $NUMJOBS || make all || exit 1 -make install strip || exit 1 - -if ! echo $PATH | grep /usr/share/texmf/bin ; then - PATH=$PATH:/usr/share/texmf/bin -fi -# ... [don't] make links to all binaries in /usr/bin for the final package. -# [that would be really pointless... $PATH should work, period. ] - -# If latex isn't there, maybe we need to do this: -if [ ! -r /usr/share/texmf/bin/latex ]; then - texconfig init -fi - -# Let's start with these defaults: -texconfig confall -texconfig dvips paper letter -texconfig xdvi paper us - -# These *might* be useful... -# Some are known to be not-so-useful, though, as they put the config files -# into /root/.texmf-config, which we're simply going to throw away anyway -# so it won't interfere with server testing. If you need these options, -# you'll probably have to run texconfig yourself in your own user (or root) -# account. -texconfig mode ljfour -#texconfig xdvi paper a4 -texconfig dvips mode ljfour -#texconfig dvips paper a4 -texconfig dvips printcmd - -texconfig dvips add bjc600 -texconfig dvips add stcolor -texconfig dvips add deskjet -texconfig dvips add ljet4 -texconfig dvips -P bjc600 mode canonbjc -texconfig dvips -P stcolor mode epstylus -texconfig dvips -P deskjet mode deskjet -texconfig dvips -P ljet4 mode ljfour -texconfig font ro -texconfig rehash - -# Add jadetex to the package: -. $CWD/jadetex.build - -# Toss redundant docs: -( cd /usr/share/texmf/doc - for file in $(find . -name "*.dvi") ; do - rm -f $(dirname $file)/$(basename $file .dvi).pdf - done -) - -# Discard local configurations: -if [ -e /root/.texmf-config ]; then - mv /root/.texmf-config /root/.texmf-config-$(mcookie) - echo "/root/.texmf-config moved out of the way... you may wish" - echo "to purge any /root/.texmf-config-* directories if the" - echo "cruft heap gets too large." -fi - -# Now, package the /usr/share/texmf/ and /usr/share/texi2html trees. -# Package tetex-doc.txz and tetex-bin.txz seperately. - -PKG1=$TMP/package-tetex -PKG2=$TMP/package-tetex-doc -rm -rf $PKG1 $PKG2 -mkdir -p $PKG1 $PKG2 - -mkdir -p $PKG1/usr/share -mv /usr/share/texmf $PKG1/usr/share -mv /usr/share/texmf-var $PKG1/usr/share -mv /usr/share/texi2html $PKG1/usr/share - -# The tetex.txz file will need an installation script to add -# /usr/share/texmf/bin to the $PATH and /usr/share/texmf/man to the $MANPATH: -mkdir -p $PKG1/etc/profile.d -cp -a $CWD/profile.d/tetex.* $PKG1/etc/profile.d -chown root:root $PKG1/etc/profile.d/tetex.* -chmod 755 $PKG1/etc/profile.d/tetex.* - -mkdir -p $PKG1/install -cp $CWD/slack-desc.tetex $PKG1/install/slack-desc -mkdir -p $PKG2/install -cp $CWD/slack-desc.tetex-doc $PKG2/install/slack-desc - -# Strip everything: -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# Gzip man pages: -gzip -9 $PKG1/usr/share/texmf/man/man?/*.? - -# Fix manpage symlinks: -( cd $PKG1/usr/share/texmf/man - for dir in man? ; do - ( cd $dir - for file in *.? ; do - if [ -L $file ]; then - LINK=$(readlink $file) - rm $file - ln -sf ${LINK}.gz ${file}.gz - fi - done - ) - done -) - -# Move some of the files into the docs package: -mkdir -p $PKG2/usr/share/texmf/doc -mv $PKG1/usr/share/texmf/doc/* $PKG2/usr/share/texmf/doc -mkdir -p $PKG2/usr/share/texinfo -mv /usr/share/texinfo/html $PKG2/usr/share/texinfo -mv $PKG1/usr/share/texmf/info $PKG2/usr -( cd $PKG1/usr/share/texmf ; ln -sf /usr/info . ) - -# Compress info pages and purge "dir" file from the package: -if [ -d $PKG2/usr/info ]; then - ( cd $PKG2/usr/info - rm -f dir - gzip -9 * - ) -fi - -# Make docs link in /usr/doc/: -mkdir -p $PKG2/usr/doc -( cd $PKG2/usr/doc ; rm -rf tetex-$VERSION ) -( cd $PKG2/usr/doc ; ln -sf /usr/share/texmf/doc tetex-$VERSION ) - -# Build the packages: -cd $PKG1 -/sbin/makepkg -l y -c n $TMP/tetex-$VERSION-$ARCH-$BUILD.txz -cd $PKG2 -/sbin/makepkg -l y -c n $TMP/tetex-doc-$VERSION-$ARCH-$BUILD.txz - |