diff options
Diffstat (limited to 'source/x/x11/x11.SlackBuild')
| -rwxr-xr-x | source/x/x11/x11.SlackBuild | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/source/x/x11/x11.SlackBuild b/source/x/x11/x11.SlackBuild new file mode 100755 index 00000000..e4753798 --- /dev/null +++ b/source/x/x11/x11.SlackBuild @@ -0,0 +1,335 @@ +#!/bin/sh +# Copyright 2007-2009 Patrick Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# To build only a single package group, specify it as $1, like: +# ./x11.SlackBuild lib +# To build only a single package, specify both the source directory +# and the name of the package, like: +# ./x11.SlackBuild lib libX11 + +pkgbase() { + PKGEXT=$(echo $1 | rev | cut -f 1 -d . | rev) + case $PKGEXT in + 'gz' ) + PKGRETURN=$(basename $1 .tar.gz) + ;; + 'bz2' ) + PKGRETURN=$(basename $1 .tar.bz2) + ;; + 'lzma' ) + PKGRETURN=$(basename $1 .tar.lzma) + ;; + 'xz' ) + PKGRETURN=$(basename $1 .tar.xz) + ;; + *) + PKGRETURN=$(basename $1) + ;; + esac + echo $PKGRETURN +} + +# Set initial variables: +CWD=$(pwd) +TMP=${TMP:-/tmp} + +# A lot of this stuff just controls the package names this time: +VERSION=${VERSION:-7.4} +ARCH=${ARCH:-x86_64} +NUMJOBS=${NUMJOBS:-" -j7 "} +BUILD=${BUILD:-1} + +PKGARCH=$ARCH + +if [ "$ARCH" = "x86_64" ]; then + LIBDIRSUFFIX="64" +else + LIBDIRSUFFIX="" +fi + +# Set up a few useful functions: + +fix_perms() { + chown -R root:root . + find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; +} + +process_man_pages() { + # Compress and if needed symlink the man pages: + if [ -d usr/man ]; then + ( cd usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) + fi +} + +process_info_pages() { + # Compress info pages and purge "dir" file from the package: + if [ -d usr/info ]; then + ( cd usr/info + rm -f dir + gzip -9 * + ) + fi +} + +no_usr_share_doc() { + # If there are docs, move them: + if [ -d usr/share/doc ]; then + mkdir -p usr/doc + mv usr/share/doc/* usr/doc + rmdir usr/share/doc + fi +} + +# Set the compile options for the $ARCH being used: +. $CWD/arch.use.flags + +SLACK_X_BUILD_DIR=$TMP/x11-build +mkdir -p $SLACK_X_BUILD_DIR + +# Better have some binaries installed first, as this may not be +# in the "magic order". I built mine by hand through trial-and-error +# before getting this script to work. It wasn't that hard... I think. ;-) +( cd src + for x_source_dir in proto data util xcb lib app doc driver font xserver ; do + # See if $1 is a source directory like "lib": + if [ ! -z "$1" ]; then + if [ ! "$1" = "${x_source_dir}" ]; then + continue + fi + fi + PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir} + rm -rf $PKG + mkdir -p $PKG + ( cd $x_source_dir + for x_pkg in *.tar.?z* ; do + # Reset $PKGARCH to its initial value: + PKGARCH=$ARCH + PKGNAME=$(echo $x_pkg | rev | cut -f 2- -d - | rev) + # Perhaps $PKGARCH should be something different: + if grep -wq "^$PKGNAME" ${CWD}/noarch ; then + PKGARCH=noarch + fi + if grep -wq "^$PKGNAME" ${CWD}/package-blacklist ; then + continue + fi + cd $SLACK_X_BUILD_DIR + # If $2 is set, we only want to build one package: + if [ ! -z "$2" ]; then + if [ "$2" = "$PKGNAME" ]; then + # Set $PKG to a private dir for the modular package build: + PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME + rm -rf $PKG + mkdir -p $PKG + else + continue + fi + fi + if grep -wq "^$PKGNAME" ${CWD}/modularize ; then + # Set $PKG to a private dir for the modular package build: + PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME + rm -rf $PKG + mkdir -p $PKG + fi + + # Let's figure out the version number on the modular package: + MODULAR_PACKAGE_VERSION=$(echo $x_pkg | rev | cut -f 3- -d . | cut -f 1 -d - | rev) + + rm -rf $(pkgbase $x_pkg) + tar xf $CWD/src/${x_source_dir}/${x_pkg} || exit 1 + cd $(pkgbase $x_pkg) || exit 1 + + fix_perms + + # If any patches are needed, call this script to apply them: + if [ -r $CWD/patch/${PKGNAME}.patch ]; then + . $CWD/patch/${PKGNAME}.patch + fi + + # I heard somewhere that -O2 breaks some chipset or another. If you encounter + # problems, please contact volkerdi@slackware.com. Thanks! :-) + + # ./configure, using custom configure script if needed: + if [ -r $CWD/configure/${PKGNAME} ]; then + . $CWD/configure/${PKGNAME} + else + # This is the default configure script: + . $CWD/configure/configure + fi + + if ! make $NUMJOBS ; then + touch ${SLACK_X_BUILD_DIR}/${PKGNAME}.failed + continue + fi + + make install DESTDIR=$PKG + + # Strip binaries: + ( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "current ar archive" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null + ) + + # If there's any special post-install things to do, do them: + if [ -r $CWD/post-install/${PKGNAME}.post-install ]; then + RUNSCRIPT=$(mktemp -p $TMP) || exit 1 + cat $CWD/post-install/${PKGNAME}.post-install \ + | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT + . $RUNSCRIPT + rm -f $RUNSCRIPT + fi + + # If this package requires some doinst.sh material, add it here: + if [ -r $CWD/doinst.sh/${PKGNAME} ]; then + mkdir -p $PKG/install + cat $CWD/doinst.sh/${PKGNAME} \ + | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \ + >> $PKG/install/doinst.sh + fi + + # If this is a modular package, build it here: + if [ -d $SLACK_X_BUILD_DIR/package-$PKGNAME ]; then + cd $PKG + process_man_pages + process_info_pages + no_usr_share_doc + mkdir -p $PKG/install + if [ -r $CWD/slack-desc/${PKGNAME} ]; then + cat $CWD/slack-desc/${PKGNAME} > $PKG/install/slack-desc + else + touch $PKG/install/slack-desc-missing + fi + if [ -r $CWD/build/${PKGNAME} ]; then + MODBUILD=$(cat $CWD/build/${PKGNAME}) + else + MODBUILD=$BUILD + fi + if [ -r $CWD/makepkg/${PKGNAME} ]; then + BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME} + else + /sbin/makepkg -l y -c n ${SLACK_X_BUILD_DIR}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz + fi + fi + + # Reset $PKG to assume we're building the whole source dir: + PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir} + + done + + # Nothing here? Must have been fully modular. :-) + if [ ! -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/etc -a \ + ! -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/usr ]; then + continue + fi + + # Build an "x11-<sourcedir>" package for anything that wasn't built modular: + # It's safer to consider these to have binaries in them. ;-) + PKGARCH=$ARCH + cd $PKG + process_man_pages + process_info_pages + no_usr_share_doc + # If there are post-install things to do for the combined package, + # we do them here. This could be used for things like making a + # VERSION number for a combined package. :-) + if [ -r $CWD/post-install/x11-${x_source_dir}.post-install ]; then + RUNSCRIPT=$(mktemp -p $TMP) || exit 1 + cat $CWD/post-install/x11-${x_source_dir}.post-install \ + | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT + . $RUNSCRIPT + rm -f $RUNSCRIPT + fi + mkdir -p $PKG/install + if [ -r $CWD/slack-desc/x11-${x_source_dir} ]; then + cat $CWD/slack-desc/x11-${x_source_dir} > $PKG/install/slack-desc + else + touch $PKG/install/slack-desc-missing + fi + if [ -r $CWD/doinst.sh/x11-${x_source_dir} ]; then + cat $CWD/doinst.sh/x11-${x_source_dir} \ + | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \ + >> $PKG/install/doinst.sh + fi + if [ -r $CWD/build/x11-${PKGNAME} ]; then + SRCDIRBUILD=$(cat $CWD/build/x11-${PKGNAME}) + else + SRCDIRBUILD=$BUILD + fi + if [ -r $CWD/makepkg/${PKGNAME} ]; then + BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME} + else + /sbin/makepkg -l y -c n ${SLACK_X_BUILD_DIR}/x11-${x_source_dir}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz + fi + ) + done +) + +exit 0 + +# I don't think I'll be using the following stuff, since I went for the latest in +# "individual", rather than a release. That was mostly because version 7.1 depends +# on a version of Mesa that won't build against kernel headers this new (&etc.). + +# If environment variable "REFRESH" is exported, start by refreshing the source tree: +# export REFRESH yes +if [ ! -z "$REFRESH" ]; then + # Only works once, unless you uncomment above. + unset REFRESH + ( cd patches + lftp -c \ + "lftp ftp://ftp.x.org:/pub/X11R7.1/patches + mirror --delete --dereference . + exit" + chmod 644 * + ) + ( cd src + mkdir -p update everything + for dir in app data deprecated doc driver extras font lib proto util xserver ; do + # We won't really download "update", as problems ensue. Plus, --dereference is + # bringing us updated files when needed, so it's redundant (like "everything"). + if [ ! -d $dir ]; then + mkdir $dir + fi + ( cd $dir + lftp -c \ + "lftp ftp://ftp.x.org:/pub/X11R7.1/src/$dir + mirror -c --delete --dereference --include-glob "*.tar.bz2" . + exit" + chmod 644 * + ) + done + ) +fi + |