1 files changed, 0 insertions, 203 deletions
diff --git a/source/xap/imagemagick/imagemagick.SlackBuild b/source/xap/imagemagick/imagemagick.SlackBuild
deleted file mode 100755
index 49797da0..00000000
--- a/source/xap/imagemagick/imagemagick.SlackBuild
+++ /dev/null
@@ -1,203 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009, 2010, 2011, 2012, 2013, 2015, 2016  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-BUILD=${BUILD:-1}
-
-# NOTE:  This is to cope with ImageMagick version numbers such as 5.4.7-4,
-# which occur fairly often (but not always).  If these numbers are all the same,
-# then this is not one of those versions.
-
-# This is a bit messy, so we'll explain it well.  :-)
-
-# This is the version number used in the source tarball filename
-FILEVER=6.9.4-9
-
-# This is the base version number, which is needed to cd into the source tree.
-# Normally this is the same as $FILEVER, but allow setting it here if needed.
-BASEVER=$FILEVER
-
-# This is the version number used in the package, where a version number cannot
-# contain a '-'.  We'll try to autogenerate this one.
-PKGVER=$(echo $FILEVER | tr - _)
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-imagemagick
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-# --with-x or not --with-x, that is the question.  It seems many other
-# distributions don't compile with X support, but it's been traditional
-# here.  I am moving the prefix to /usr (instead of /usr/X11R6) though,
-# because many X-linked things are put into /usr now (like GNOME), and
-# I've heard a few reports of compile failures when this isn't in /usr.
-# Everyone else does it -- time to follow the path of least resistance.
-
-cd $TMP
-rm -rf ImageMagick-$BASEVER
-tar xvf $CWD/ImageMagick-$FILEVER.tar.xz || exit 1
-cd ImageMagick-$BASEVER || exit 1
-
-# Harden the default settings in policy.xml to prevent security issues:
-zcat $CWD/policy.xml.diff.gz | patch -p1 --verbose || exit 1
-
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-# --without-modules seems to avoid a segfault when identifying
-# or converting ps or eps files...
-
-# --disable-openmp seems to keep the perl Image::Magick from
-# eating up all RAM, and may help other script bindings.
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --sysconfdir=/etc \
-  --program-prefix= \
-  --with-x \
-  --with-frozenpaths=no \
-  --without-modules \
-  --disable-openmp \
-  --enable-static=no \
-  --enable-shared \
-  --with-gcc-arch=$ARCH \
-  --with-perl \
-  --with-rsvg \
-  --build=$ARCH-slackware-linux || exit 1
-
-make $NUMJOBS INSTALLDIRS=vendor || make INSTALLDIRS=vendor || exit 1
-# First, spam the running development system, as ImageMagick is unable to
-# properly link the utilities against a new shared library major version
-# otherwise which has led to several broken packages over the years:
-make install INSTALLDIRS=vendor || exit 1
-/sbin/ldconfig
-
-# Now build again against the new libraries and headers:
-make clean
-make $NUMJOBS INSTALLDIRS=vendor || make INSTALLDIRS=vendor || exit 1
-make install INSTALLDIRS=vendor DESTDIR=$PKG || exit 1
-
-# This should certainly not be included.
-# It stomps on the libtool package.
-rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libltdl.*
-
-# .la files in /usr/lib${LIBDIRSUFFIX}/ should be removed.
-# Other .la files should be left alone, as ImageMagick uses them internally
-# to locate modules.
-rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
-
-( cd $PKG
-  # Nothing but a perl upgrade should replace this (and maybe not even that)
-  find . -name perllocal.pod | xargs rm -f
-)
-
-# DESTDIR is still broken about this, but works well enough otherwise:
-chmod 644 $PKG/usr/share/man/man3/*
-mv $PKG/usr/share/man/man3 $PKG/usr/man
-rmdir $PKG/usr/share/man
-
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/perl5
-  # Ditch empty dirs:
-  rmdir */* 2> /dev/null
-  rmdir * 2> /dev/null
-)
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# Compress and link manpages, if any:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1 | grep -v '\.gz$') ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
-
-# Move config files to .new:
-( cd $PKG/etc/ImageMagick*
-  for file in * ; do
-    mv ${file} ${file}.new
-  done
-)
-
-mkdir -p $PKG/usr
-mv $PKG/usr/share/doc $PKG/usr
-cp -a \
-  AUTHORS LICENSE NEWS NOTICE Platforms.txt QuickStart.txt README.txt \
-  $PKG/usr/doc/Imag*
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/ImageMagick-*)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-mkdir -p $PKG/install
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/imagemagick-$PKGVER-$ARCH-$BUILD.txz
-