14 files changed, 1204 insertions, 0 deletions
diff --git a/testing/source/glibc/doinst.sh-glibc b/testing/source/glibc/doinst.sh-glibc
new file mode 100644
index 00000000..4ce7c1a0
--- /dev/null
+++ b/testing/source/glibc/doinst.sh-glibc
@@ -0,0 +1,199 @@
+#!/bin/sh
+# Copyright (C) 2002, 2005  Slackware Linux, Inc.
+# Copyright 2005, 2006, 2007, 2011, 2012, 2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# Swap glibc on the fly.
+#
+# If we're on a running system we have to handle this _very_ carefully.  :-)
+# The tricks involved here get trickier every time...
+
+# OK, now we have to be sure of a few things.  First, you do have a 2.6
+# kernel running, right?
+
+if [ -r /proc/ksyms ]; then
+  echo "FATAL: you need to be running a 2.6.x kernel in order to upgrade"
+  echo "to this version of glibc."
+  echo
+  sleep 999
+  exit 1
+fi
+
+# Next, stop using the /lib/ntpl libraries.  These are now obsolete and
+# will break the installation if present:
+if [ -d lib/tls ]; then
+  mkdir -p lib/obsolete
+  mv lib/tls lib/obsolete
+fi
+if [ -x sbin/ldconfig ]; then
+  sbin/ldconfig -r . 2> /dev/null
+fi
+
+# Install NPTL glibc libraries:
+if [ -x /sbin/ldconfig -a -d lib/incoming ]; then # swap on the fly
+  # Try to protect with flock against another installpkg/removepkg running
+  # ldconfig while we're doing the on-the-fly install:
+  mkdir -p run/lock/pkgtools
+  ( flock 9 || exit 11
+    # First create copies of the incoming libraries:
+    ( cd lib/incoming
+      for file in * ; do
+        if [ ! -r ../${file}.incoming ]; then
+          cp -a $file ../${file}.incoming
+        fi
+      done
+    )
+    # Then switch to them all at once:
+    /sbin/ldconfig -l lib/*.incoming 2> /dev/null
+    # Remove old versions of the glibc libraries. If you really don't want to
+    # do this for some reason, create a file /etc/glibc-nowipe.
+    if [ ! -r etc/glibc-nowipe ]; then
+      ( cd lib
+        for INCOMING in incoming/*-* ; do
+          LIBPREFIX=$(basename $INCOMING | cut -f 1 -d -)
+          for LIBRARY in ${LIBPREFIX}-* ; do
+            # Don't remove the library if it ends in .incoming:
+            if [ "$(echo $LIBRARY | rev | cut -f 1 -d .)" = "gnimocni" ]; then
+              continue
+            fi
+            # Don't remove symlinks:
+            if [ -L $LIBRARY ]; then
+              continue
+            fi
+            rm -f $LIBRARY
+          done
+        done
+      )
+    fi
+    # Finally, rename them and clean up:
+    ( cd lib
+      for file in *.incoming ; do
+        rm -f `basename $file .incoming`
+        cp -a $file `basename $file .incoming`
+        /sbin/ldconfig -l `basename $file .incoming` 2> /dev/null
+        rm -f $file
+      done
+    )
+  ) 9> run/lock/pkgtools/ldconfig.lock
+else # no ldconfig?  Good, it's safe to just jam it on home (and make links below):
+  ( cd lib/incoming
+    for file in * ; do
+      cp -a $file ..
+    done
+  )
+fi
+# Now, get rid of the temporary directory:
+rm -rf lib/incoming
+# Done installing NPTL glibc libraries.
+
+# Handle config files:
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/nscd.conf.new
+config etc/profile.d/glibc.csh.new
+config etc/profile.d/glibc.sh.new
+# Clearly you already decided this issue.  :-)
+rm -f etc/profile.d/glibc.csh.new
+rm -f etc/profile.d/glibc.sh.new
+
+# In case there's no ldconfig, make the links manually:
+if [ ! -x /sbin/ldconfig ]; then
+( cd lib ; rm -rf libnss_nis.so.2 )
+( cd lib ; ln -sf libnss_nis-@@VERSION@@.so libnss_nis.so.2 )
+( cd lib ; rm -rf libm.so.6 )
+( cd lib ; ln -sf libm-@@VERSION@@.so libm.so.6 )
+( cd lib ; rm -rf libnss_files.so.2 )
+( cd lib ; ln -sf libnss_files-@@VERSION@@.so libnss_files.so.2 )
+( cd lib ; rm -rf libresolv.so.2 )
+( cd lib ; ln -sf libresolv-@@VERSION@@.so libresolv.so.2 )
+( cd lib ; rm -rf libnsl.so.1 )
+( cd lib ; ln -sf libnsl-@@VERSION@@.so libnsl.so.1 )
+( cd lib ; rm -rf libutil.so.1 )
+( cd lib ; ln -sf libutil-@@VERSION@@.so libutil.so.1 )
+( cd lib ; rm -rf libnss_compat.so.2 )
+( cd lib ; ln -sf libnss_compat-@@VERSION@@.so libnss_compat.so.2 )
+( cd lib ; rm -rf libthread_db.so.1 )
+( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 )
+( cd lib ; rm -rf libnss_hesiod.so.2 )
+( cd lib ; ln -sf libnss_hesiod-@@VERSION@@.so libnss_hesiod.so.2 )
+( cd lib ; rm -rf libanl.so.1 )
+( cd lib ; ln -sf libanl-@@VERSION@@.so libanl.so.1 )
+( cd lib ; rm -rf libcrypt.so.1 )
+( cd lib ; ln -sf libcrypt-@@VERSION@@.so libcrypt.so.1 )
+( cd lib ; rm -rf libBrokenLocale.so.1 )
+( cd lib ; ln -sf libBrokenLocale-@@VERSION@@.so libBrokenLocale.so.1 )
+( cd lib ; rm -rf ld-linux.so.2 )
+( cd lib ; ln -sf ld-@@VERSION@@.so ld-linux.so.2 )
+( cd lib ; rm -rf libdl.so.2 )
+( cd lib ; ln -sf libdl-@@VERSION@@.so libdl.so.2 )
+( cd lib ; rm -rf libnss_dns.so.2 )
+( cd lib ; ln -sf libnss_dns-@@VERSION@@.so libnss_dns.so.2 )
+( cd lib ; rm -rf libpthread.so.0 )
+( cd lib ; ln -sf libpthread-@@VERSION@@.so libpthread.so.0 )
+( cd lib ; rm -rf libnss_nisplus.so.2 )
+( cd lib ; ln -sf libnss_nisplus-@@VERSION@@.so libnss_nisplus.so.2 )
+( cd lib ; rm -rf libc.so.6 )
+( cd lib ; ln -sf libc-@@VERSION@@.so libc.so.6 )
+( cd lib ; rm -rf librt.so.1 )
+( cd lib ; ln -sf librt-@@VERSION@@.so librt.so.1 )
+fi
+
+# More links:
+( cd usr/lib ; rm -rf libnss_nisplus.so )
+( cd usr/lib ; ln -sf ../../lib/libnss_nisplus.so.2 libnss_nisplus.so )
+# This is now a linker script:
+#( cd usr/lib ; rm -rf libpthread.so )
+#( cd usr/lib ; ln -sf ../../lib/libpthread.so.0 libpthread.so )
+( cd usr/lib ; rm -rf libresolv.so )
+( cd usr/lib ; ln -sf ../../lib/libresolv.so.2 libresolv.so )
+( cd usr/lib ; rm -rf libnsl.so )
+( cd usr/lib ; ln -sf ../../lib/libnsl.so.1 libnsl.so )
+( cd usr/lib ; rm -rf libnss_hesiod.so )
+( cd usr/lib ; ln -sf ../../lib/libnss_hesiod.so.2 libnss_hesiod.so )
+( cd usr/lib ; rm -rf libnss_files.so )
+( cd usr/lib ; ln -sf ../../lib/libnss_files.so.2 libnss_files.so )
+# This is now a linker script:
+#( cd usr/lib ; rm -rf libm.so )
+#( cd usr/lib ; ln -sf ../../lib/libm.so.6 libm.so )
+( cd usr/lib ; rm -rf libutil.so )
+( cd usr/lib ; ln -sf ../../lib/libutil.so.1 libutil.so )
+( cd usr/lib ; rm -rf libnss_compat.so )
+( cd usr/lib ; ln -sf ../../lib/libnss_compat.so.2 libnss_compat.so )
+( cd usr/lib ; rm -rf libthread_db.so )
+( cd usr/lib ; ln -sf ../../lib/libthread_db.so.1 libthread_db.so )
+( cd usr/lib ; rm -rf libcrypt.so )
+( cd usr/lib ; ln -sf ../../lib/libcrypt.so.1 libcrypt.so )
+( cd usr/lib ; rm -rf libBrokenLocale.so )
+( cd usr/lib ; ln -sf ../../lib/libBrokenLocale.so.1 libBrokenLocale.so )
+( cd usr/lib ; rm -rf libdl.so )
+( cd usr/lib ; ln -sf ../../lib/libdl.so.2 libdl.so )
+( cd usr/lib ; rm -rf libnss_dns.so )
+( cd usr/lib ; ln -sf ../../lib/libnss_dns.so.2 libnss_dns.so )
+( cd usr/lib ; rm -rf librt.so )
+( cd usr/lib ; ln -sf ../../lib/librt.so.1 librt.so )
+( cd usr/lib ; rm -rf libanl.so )
+( cd usr/lib ; ln -sf ../../lib/libanl.so.1 libanl.so )
+( cd usr/lib ; rm -rf libnss_nis.so )
+( cd usr/lib ; ln -sf ../../lib/libnss_nis.so.2 libnss_nis.so )
+( cd usr/share/zoneinfo ; rm -rf localtime )
+( cd usr/share/zoneinfo ; ln -sf /etc/localtime localtime )
+( cd bin ; rm -rf sln )
+( cd bin ; ln -sf /sbin/sln sln )
diff --git a/testing/source/glibc/doinst.sh-glibc-solibs b/testing/source/glibc/doinst.sh-glibc-solibs
new file mode 100644
index 00000000..570f427d
--- /dev/null
+++ b/testing/source/glibc/doinst.sh-glibc-solibs
@@ -0,0 +1,156 @@
+#!/bin/sh
+# Copyright (C) 2002, 2005  Slackware Linux, Inc.
+# Copyright 2005, 2006, 2011, 2012, 2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# Swap glibc on the fly.
+#
+# If we're on a running system we have to handle this _very_ carefully.  :-)
+# The tricks involved here get trickier every time...
+
+# OK, now we have to be sure of a few things.  First, you do have a 2.6
+# kernel running, right?
+
+if [ -r /proc/ksyms ]; then
+  echo "FATAL: you need to be running a 2.6.x kernel in order to upgrade"
+  echo "to this version of glibc."
+  echo
+  sleep 999
+  exit 1
+fi
+
+# Next, stop using the /lib/ntpl libraries.  These are now obsolete and
+# will break the installation if present:
+if [ -d lib/tls ]; then
+  mkdir -p lib/obsolete
+  mv lib/tls lib/obsolete
+fi
+if [ -x sbin/ldconfig ]; then
+  sbin/ldconfig -r . 2> /dev/null
+fi
+
+# Install NPTL glibc libraries:
+if [ -x /sbin/ldconfig -a -d lib/incoming ]; then # swap on the fly
+  # Try to protect with flock against another installpkg/removepkg running
+  # ldconfig while we're doing the on-the-fly install:
+  mkdir -p run/lock/pkgtools
+  ( flock 9 || exit 11
+    # First create copies of the incoming libraries:
+    ( cd lib/incoming
+      for file in * ; do
+        if [ ! -r ../${file}.incoming ]; then
+          cp -a $file ../${file}.incoming
+        fi
+      done
+    )
+    # Then switch to them all at once:
+    /sbin/ldconfig -l lib/*.incoming 2> /dev/null
+    # Remove old versions of the glibc libraries. If you really don't want to
+    # do this for some reason, create a file /etc/glibc-nowipe.
+    if [ ! -r etc/glibc-nowipe ]; then
+      ( cd lib
+        for INCOMING in incoming/*-* ; do
+          LIBPREFIX=$(basename $INCOMING | cut -f 1 -d -)
+          for LIBRARY in ${LIBPREFIX}-* ; do
+            # Don't remove the library if it ends in .incoming:
+            if [ "$(echo $LIBRARY | rev | cut -f 1 -d .)" = "gnimocni" ]; then
+              continue
+            fi
+            # Don't remove symlinks:
+            if [ -L $LIBRARY ]; then
+              continue
+            fi
+            rm -f $LIBRARY
+          done
+        done
+      )
+    fi
+    # Finally, rename them and clean up:
+    ( cd lib
+      for file in *.incoming ; do
+        rm -f `basename $file .incoming`
+        cp -a $file `basename $file .incoming`
+        /sbin/ldconfig -l `basename $file .incoming` 2> /dev/null
+        rm -f $file
+      done
+    )
+  ) 9> run/lock/pkgtools/ldconfig.lock
+else # no ldconfig?  Good, it's safe to just jam it on home (and make links below):
+  ( cd lib/incoming
+    for file in * ; do
+      cp -a $file ..
+    done
+  )
+fi
+# Now, get rid of the temporary directory:
+rm -rf lib/incoming
+# Done installing NPTL glibc libraries.
+
+# Handle config files:
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/profile.d/glibc.csh.new
+config etc/profile.d/glibc.sh.new
+# Clearly you already decided this issue.  :-)
+rm -f etc/profile.d/glibc.csh.new
+rm -f etc/profile.d/glibc.sh.new
+
+# In case there's no ldconfig, make the links manually:
+if [ ! -x /sbin/ldconfig ]; then
+( cd lib ; rm -rf libnss_nis.so.2 )
+( cd lib ; ln -sf libnss_nis-@@VERSION@@.so libnss_nis.so.2 )
+( cd lib ; rm -rf libm.so.6 )
+( cd lib ; ln -sf libm-@@VERSION@@.so libm.so.6 )
+( cd lib ; rm -rf libnss_files.so.2 )
+( cd lib ; ln -sf libnss_files-@@VERSION@@.so libnss_files.so.2 )
+( cd lib ; rm -rf libresolv.so.2 )
+( cd lib ; ln -sf libresolv-@@VERSION@@.so libresolv.so.2 )
+( cd lib ; rm -rf libnsl.so.1 )
+( cd lib ; ln -sf libnsl-@@VERSION@@.so libnsl.so.1 )
+( cd lib ; rm -rf libutil.so.1 )
+( cd lib ; ln -sf libutil-@@VERSION@@.so libutil.so.1 )
+( cd lib ; rm -rf libnss_compat.so.2 )
+( cd lib ; ln -sf libnss_compat-@@VERSION@@.so libnss_compat.so.2 )
+( cd lib ; rm -rf libthread_db.so.1 )
+( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 )
+( cd lib ; rm -rf libnss_hesiod.so.2 )
+( cd lib ; ln -sf libnss_hesiod-@@VERSION@@.so libnss_hesiod.so.2 )
+( cd lib ; rm -rf libanl.so.1 )
+( cd lib ; ln -sf libanl-@@VERSION@@.so libanl.so.1 )
+( cd lib ; rm -rf libcrypt.so.1 )
+( cd lib ; ln -sf libcrypt-@@VERSION@@.so libcrypt.so.1 )
+( cd lib ; rm -rf libBrokenLocale.so.1 )
+( cd lib ; ln -sf libBrokenLocale-@@VERSION@@.so libBrokenLocale.so.1 )
+( cd lib ; rm -rf ld-linux.so.2 )
+( cd lib ; ln -sf ld-@@VERSION@@.so ld-linux.so.2 )
+( cd lib ; rm -rf libdl.so.2 )
+( cd lib ; ln -sf libdl-@@VERSION@@.so libdl.so.2 )
+( cd lib ; rm -rf libnss_dns.so.2 )
+( cd lib ; ln -sf libnss_dns-@@VERSION@@.so libnss_dns.so.2 )
+( cd lib ; rm -rf libpthread.so.0 )
+( cd lib ; ln -sf libpthread-@@VERSION@@.so libpthread.so.0 )
+( cd lib ; rm -rf libnss_nisplus.so.2 )
+( cd lib ; ln -sf libnss_nisplus-@@VERSION@@.so libnss_nisplus.so.2 )
+( cd lib ; rm -rf libc.so.6 )
+( cd lib ; ln -sf libc-@@VERSION@@.so libc.so.6 )
+( cd lib ; rm -rf librt.so.1 )
+( cd lib ; ln -sf librt-@@VERSION@@.so librt.so.1 )
+fi
diff --git a/testing/source/glibc/glibc-c-utf8-locale.patch b/testing/source/glibc/glibc-c-utf8-locale.patch
new file mode 100644
index 00000000..7fabf303
--- /dev/null
+++ b/testing/source/glibc/glibc-c-utf8-locale.patch
@@ -0,0 +1,270 @@
+From 2eda7b462b415105f5a05c1323372d4e39d46439 Mon Sep 17 00:00:00 2001
+From: Mike FABIAN <mfabian@redhat.com>
+Date: Mon, 10 Aug 2015 15:58:12 +0200
+Subject: [PATCH] Add a C.UTF-8 locale
+
+---
+ localedata/SUPPORTED |   1 +
+ localedata/locales/C | 238 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 239 insertions(+)
+ create mode 100644 localedata/locales/C
+
+diff --git a/localedata/SUPPORTED b/localedata/SUPPORTED
+index 8ca023e..2a78391 100644
+--- a/localedata/SUPPORTED
++++ b/localedata/SUPPORTED
+@@ -1,6 +1,7 @@
+ # This file names the currently supported and somewhat tested locales.
+ # If you have any additions please file a glibc bug report.
+ SUPPORTED-LOCALES=\
++C.UTF-8/UTF-8 \
+ aa_DJ.UTF-8/UTF-8 \
+ aa_DJ/ISO-8859-1 \
+ aa_ER/UTF-8 \
+diff --git a/localedata/locales/C b/localedata/locales/C
+new file mode 100644
+index 0000000..fdf460e
+--- /dev/null
++++ b/localedata/locales/C
+@@ -0,0 +1,238 @@
++escape_char /
++comment_char %
++% Locale for C locale in UTF-8
++
++LC_IDENTIFICATION
++title      "C locale"
++source     ""
++address    ""
++contact    ""
++email      "mfabian@redhat.com"
++tel        ""
++fax        ""
++language   "C"
++territory  ""
++revision   "1.0"
++date       "2015-08-10"
++%
++category  "i18n:2012";LC_IDENTIFICATION
++category  "i18n:2012";LC_CTYPE
++category  "i18n:2012";LC_COLLATE
++category  "i18n:2012";LC_TIME
++category  "i18n:2012";LC_NUMERIC
++category  "i18n:2012";LC_MONETARY
++category  "i18n:2012";LC_MESSAGES
++category  "i18n:2012";LC_PAPER
++category  "i18n:2012";LC_NAME
++category  "i18n:2012";LC_ADDRESS
++category  "i18n:2012";LC_TELEPHONE
++category  "i18n:2012";LC_MEASUREMENT
++END LC_IDENTIFICATION
++
++LC_CTYPE
++copy "i18n"
++
++translit_start
++include "translit_combining";""
++translit_end
++
++END LC_CTYPE
++
++LC_COLLATE
++order_start forward
++<U0000>
++..
++<UFFFF>
++<U10000>
++..
++<U1FFFF>
++<U20000>
++..
++<U2FFFF>
++<UE0000>
++..
++<UEFFFF>
++<UF0000>
++..
++<UFFFFF>
++<U100000>
++..
++<U10FFFF>
++UNDEFINED
++order_end
++END LC_COLLATE
++
++LC_MONETARY
++% This is the 14652 i18n fdcc-set definition for
++% the LC_MONETARY category
++% (except for the int_curr_symbol and currency_symbol, they are empty in
++% the 14652 i18n fdcc-set definition and also empty in
++% glibc/locale/C-monetary.c. But localedef complains in that case).
++%
++% Using "USD" for int_curr_symbol. But maybe "XXX" would be better?
++% XXX is "No currency" (https://en.wikipedia.org/wiki/ISO_4217)
++int_curr_symbol     "<U0055><U0053><U0044><U0020>"
++% Using "$" for currency_symbol. But maybe <U00A4> would be better?
++% U+00A4 is the "generic currency symbol"
++% (https://en.wikipedia.org/wiki/Currency_sign_%28typography%29)
++currency_symbol     "<U0024>"
++mon_decimal_point   "<U002E>"
++mon_thousands_sep   ""
++mon_grouping        -1
++positive_sign       ""
++negative_sign       "<U002D>"
++int_frac_digits     -1
++frac_digits         -1
++p_cs_precedes       -1
++int_p_sep_by_space  -1
++p_sep_by_space      -1
++n_cs_precedes       -1
++int_n_sep_by_space  -1
++n_sep_by_space      -1
++p_sign_posn         -1
++n_sign_posn         -1
++%
++END LC_MONETARY
++
++LC_NUMERIC
++% This is the POSIX Locale definition for
++% the LC_NUMERIC category.
++%
++decimal_point   "<U002E>"
++thousands_sep   ""
++grouping        -1
++END LC_NUMERIC
++
++LC_TIME
++% This is the POSIX Locale definition for
++% the LC_TIME category.
++%
++% Abbreviated weekday names (%a)
++abday       "<U0053><U0075><U006E>";"<U004D><U006F><U006E>";/
++            "<U0054><U0075><U0065>";"<U0057><U0065><U0064>";/
++            "<U0054><U0068><U0075>";"<U0046><U0072><U0069>";/
++            "<U0053><U0061><U0074>"
++
++% Full weekday names (%A)
++day         "<U0053><U0075><U006E><U0064><U0061><U0079>";/
++            "<U004D><U006F><U006E><U0064><U0061><U0079>";/
++            "<U0054><U0075><U0065><U0073><U0064><U0061><U0079>";/
++            "<U0057><U0065><U0064><U006E><U0065><U0073><U0064><U0061><U0079>";/
++            "<U0054><U0068><U0075><U0072><U0073><U0064><U0061><U0079>";/
++            "<U0046><U0072><U0069><U0064><U0061><U0079>";/
++            "<U0053><U0061><U0074><U0075><U0072><U0064><U0061><U0079>"
++
++% Abbreviated month names (%b)
++abmon       "<U004A><U0061><U006E>";"<U0046><U0065><U0062>";/
++            "<U004D><U0061><U0072>";"<U0041><U0070><U0072>";/
++            "<U004D><U0061><U0079>";"<U004A><U0075><U006E>";/
++            "<U004A><U0075><U006C>";"<U0041><U0075><U0067>";/
++            "<U0053><U0065><U0070>";"<U004F><U0063><U0074>";/
++            "<U004E><U006F><U0076>";"<U0044><U0065><U0063>"
++
++% Full month names (%B)
++mon         "<U004A><U0061><U006E><U0075><U0061><U0072><U0079>";/
++            "<U0046><U0065><U0062><U0072><U0075><U0061><U0072><U0079>";/
++            "<U004D><U0061><U0072><U0063><U0068>";/
++            "<U0041><U0070><U0072><U0069><U006C>";/
++            "<U004D><U0061><U0079>";/
++            "<U004A><U0075><U006E><U0065>";/
++            "<U004A><U0075><U006C><U0079>";/
++            "<U0041><U0075><U0067><U0075><U0073><U0074>";/
++            "<U0053><U0065><U0070><U0074><U0065><U006D><U0062><U0065><U0072>";/
++            "<U004F><U0063><U0074><U006F><U0062><U0065><U0072>";/
++            "<U004E><U006F><U0076><U0065><U006D><U0062><U0065><U0072>";/
++            "<U0044><U0065><U0063><U0065><U006D><U0062><U0065><U0072>"
++
++% Week description, consists of three fields:
++% 1. Number of days in a week.
++% 2. Gregorian date that is a first weekday (19971130 for Sunday, 19971201 for Monday).
++% 3. The weekday number to be contained in the first week of the year.
++%
++% ISO 8601 conforming applications should use the values 7, 19971201 (a
++% Monday), and 4 (Thursday), respectively.
++week    7;19971201;4
++first_weekday	1
++first_workday	1
++
++% Appropriate date and time representation (%c)
++%	"%a %b %e %H:%M:%S %Y"
++d_t_fmt "<U0025><U0061><U0020><U0025><U0062><U0020><U0025><U0065><U0020><U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U0059>"
++
++% Appropriate date representation (%x)
++%	"%m/%d/%y"
++d_fmt   "<U0025><U006D><U002F><U0025><U0064><U002F><U0025><U0079>"
++
++% Appropriate time representation (%X)
++%	"%H:%M:%S"
++t_fmt   "<U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053>"
++
++% Appropriate AM/PM time representation (%r)
++%	"%I:%M:%S %p"
++t_fmt_ampm "<U0025><U0049><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U0070>"
++
++% Equivalent of AM/PM (%p)      "AM"/"PM"
++%
++am_pm	"<U0041><U004D>";"<U0050><U004D>"
++
++% Appropriate date representation (date(1))   "%a %b %e %H:%M:%S %Z %Y"
++date_fmt	"<U0025><U0061><U0020><U0025><U0062><U0020><U0025><U0065><U0020><U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U005A><U0020><U0025><U0059>"
++END LC_TIME
++
++LC_MESSAGES
++% This is the POSIX Locale definition for
++% the LC_NUMERIC category.
++%
++yesexpr "<U005E><U005B><U0079><U0059><U005D>"
++noexpr  "<U005E><U005B><U006E><U004E><U005D>"
++yesstr  "<U0059><U0065><U0073>"
++nostr   "<U004E><U006F>"
++END LC_MESSAGES
++
++LC_PAPER
++% This is the ISO/IEC 14652 "i18n" definition for
++% the LC_PAPER category.
++% (A4 paper, this is also used in the built in C/POSIX
++% locale in glibc/locale/C-paper.c)
++height   297
++width    210
++END LC_PAPER
++
++LC_NAME
++% This is the ISO/IEC 14652 "i18n" definition for
++% the LC_NAME category.
++% "%p%t%g%t%m%t%f"
++% (also used in the built in C/POSIX locale in glibc/locale/C-name.c)
++name_fmt    "<U0025><U0070><U0025><U0074><U0025><U0067><U0025><U0074>/
++<U0025><U006D><U0025><U0074><U0025><U0066>"
++END LC_NAME
++
++LC_ADDRESS
++% This is the ISO/IEC 14652 "i18n" definition for
++% the LC_ADDRESS category.
++% "%a%N%f%N%d%N%b%N%s %h %e %r%N%C-%z %T%N%c%N"
++% (also used in the built in C/POSIX locale in glibc/locale/C-address.c)
++postal_fmt    "<U0025><U0061><U0025><U004E><U0025><U0066><U0025><U004E>/
++<U0025><U0064><U0025><U004E><U0025><U0062><U0025><U004E><U0025><U0073>/
++<U0020><U0025><U0068><U0020><U0025><U0065><U0020><U0025><U0072><U0025>/
++<U004E><U0025><U0043><U002D><U0025><U007A><U0020><U0025><U0054><U0025>/
++<U004E><U0025><U0063><U0025><U004E>"
++END LC_ADDRESS
++
++LC_TELEPHONE
++% This is the ISO/IEC 14652 "i18n" definition for
++% the LC_TELEPHONE category.
++% "+%c %a %l"
++tel_int_fmt    "<U002B><U0025><U0063><U0020><U0025><U0061><U0020><U0025>/
++<U006C>"
++% (also used in the built in C/POSIX locale in glibc/locale/C-telephone.c)
++END LC_TELEPHONE
++
++LC_MEASUREMENT
++% This is the ISO/IEC 14652 "i18n" definition for
++% the LC_MEASUREMENT category.
++% (same as in the built in C/POSIX locale in glibc/locale/C-measurement.c)
++%metric
++measurement    1
++END LC_MEASUREMENT
++
+-- 
+2.4.3
+
diff --git a/testing/source/glibc/glibc-cvs-checkout.sh b/testing/source/glibc/glibc-cvs-checkout.sh
new file mode 100755
index 00000000..022d0117
--- /dev/null
+++ b/testing/source/glibc/glibc-cvs-checkout.sh
@@ -0,0 +1,3 @@
+echo "The password below is \"anoncvs\":"
+cvs -z 9 -d :pserver:anoncvs@sources.redhat.com:/cvs/glibc login
+cvs -z 9 -d :pserver:anoncvs@sources.redhat.com:/cvs/glibc co libc
diff --git a/testing/source/glibc/glibc.SlackBuild b/testing/source/glibc/glibc.SlackBuild
new file mode 100755
index 00000000..d12d11eb
--- /dev/null
+++ b/testing/source/glibc/glibc.SlackBuild
@@ -0,0 +1,444 @@
+#!/bin/bash
+
+# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+## build glibc-$VERSION for Slackware
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=glibc
+VERSION=${VERSION:-$(echo glibc-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+CHECKOUT=${CHECKOUT:-""}
+BUILD=${BUILD:-1}
+
+# I was considering disabling NSCD, but MoZes talked me out of it.  :)
+#DISABLE_NSCD=" --disable-nscd "
+
+# $ARCH may be preset, otherwise i586 compatibility with i686 binary
+# structuring is the Slackware default.
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "glibc-$VERSION-$ARCH-$BUILD.txz"
+  echo "glibc-i18n-$VERSION-$ARCH-$BUILD.txz"
+  echo "glibc-profile-$VERSION-$ARCH-$BUILD.txz"
+  echo "glibc-solibs-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+# Work around -Werror failure with gcc-8.2.0.
+# NOTE: Until the next glibc release takes care of this issue, this will
+# likely need to be updated with every new gcc release's version. Yes, we
+# could pass --disable-werror by default, but I'd rather not just shove a
+# stick in it like that.
+if [ "$(gcc -dumpversion)" = "8.2.0" ]; then
+  if [ "$VERSION" = "2.27" ]; then
+    WERROR="--disable-werror"
+  fi
+fi
+
+# I'll break this out as an option for fun  :-)
+case $ARCH  in
+  i386)
+    OPTIMIZ="-O3 -march=i386 -mcpu=i686"
+    LIBDIRSUFFIX=""
+    ;;
+  i486)
+    OPTIMIZ="-O3 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+    ;;
+  i586)
+    OPTIMIZ="-O3 -march=i586 -mtune=i686"
+    LIBDIRSUFFIX=""
+    ;;
+  i686)
+    OPTIMIZ="-O3 -march=i686"
+    LIBDIRSUFFIX=""
+    ;;
+  athlon)
+    OPTIMIZ="-O3 -march=athlon"
+    LIBDIRSUFFIX=""
+    ;;
+  s390)
+    OPTIMIZ="-O3"
+    LIBDIRSUFFIX=""
+    ;;
+  x86_64)
+    OPTIMIZ="-O3 -fPIC"
+    LIBDIRSUFFIX="64"
+    ;;
+  *)
+    OPTIMIZ="-O3"
+    LIBDIRSUFFIX=""
+    ;;
+esac
+
+case $ARCH in
+  x86_64)
+    TARGET=${TARGET:-x86_64}
+    ;;
+  i586)
+    # This should be i586 for all 32-bit x86 arch:
+    TARGET=${TARGET:-i586}
+    ;;
+esac
+
+# Hand off the $ARCH variable to $SLACKWARE_ARCH to avoid confusing glibc:
+SLACKWARE_ARCH=$ARCH
+unset ARCH
+
+CVSVER=${VERSION}${CHECKOUT}
+
+# NOTE!!!  glibc needs to be built against the sanitized kernel headers,
+# which will be installed under /usr/include by the kernel-headers package.
+# Be sure the correct version of the headers package is installed BEFORE
+# building glibc!
+
+TMP=${TMP:-/tmp}
+mkdir -p $TMP
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# This function fixes a doinst.sh file for x86_64.
+# With thanks to Fred Emmott.
+fix_doinst() {
+  if [ "x$LIBDIRSUFFIX" = "x" ]; then
+    return;
+  fi;
+  # Fix "( cd usr/lib ;" occurrences
+  sed -i "s#lib ;#lib${LIBDIRSUFFIX} ;#" install/doinst.sh
+  # Fix "lib/" occurrences
+  sed -i "s#lib/#lib${LIBDIRSUFFIX}/#g" install/doinst.sh
+  # Fix "( cd lib" occurrences
+  sed -i "s#( cd lib\$#( cd lib${LIBDIRSUFFIX}#" install/doinst.sh
+
+  if [ "$SLACKWARE_ARCH" = "x86_64" ]; then
+    sed -i 's#ld-linux.so.2#ld-linux-x86-64.so.2#' install/doinst.sh
+  fi
+}
+
+# This is a patch function to put all glibc patches in the build script
+# up near the top.
+apply_patches() {
+  # Use old-style locale directories rather than a single (and strangely
+  # formatted) /usr/lib/locale/locale-archive file:
+  zcat $CWD/glibc.locale.no-archive.diff.gz | patch -p1 --verbose || exit 1
+  # Support ru_RU.CP1251 locale:
+  zcat $CWD/glibc.ru_RU.CP1251.diff.gz | patch -p1 --verbose || exit 1
+  # Add a C.UTF-8 locale:
+  zcat $CWD/glibc-c-utf8-locale.patch.gz | patch -p1 --verbose || exit 1
+}
+
+# This is going to be the initial $DESTDIR:
+export PKG=$TMP/package-glibc-incoming-tree
+PGLIBC=$TMP/package-glibc
+PSOLIBS=$TMP/package-glibc-solibs
+PI18N=$TMP/package-glibc-i18n
+PPROFILE=$TMP/package-glibc-profile
+PDEBUG=$TMP/package-glibc-debug
+
+# Empty these locations first:
+for dir in $PKG $PGLIBC $PSOLIBS $PZONE $PI18N $PPROFILE $PDEBUG ; do
+  if [ -d $dir ]; then
+    rm -rf $dir
+  fi
+  mkdir -p $dir
+done
+if [ -d $TMP/glibc-$VERSION ]; then
+  rm -rf $TMP/glibc-$VERSION
+fi
+
+# Create an incoming directory structure for glibc to be built into:
+mkdir -p $PKG/lib${LIBDIRSUFFIX}
+mkdir -p $PKG/sbin
+mkdir -p $PKG/usr/bin
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
+mkdir -p $PKG/usr/sbin
+mkdir -p $PKG/usr/include
+mkdir -p $PKG/usr/doc
+mkdir -p $PKG/usr/man
+mkdir -p $PKG/usr/share
+mkdir -p $PKG/var/db/nscd
+mkdir -p $PKG/var/run/nscd
+
+# Begin extract/compile:
+cd $TMP
+rm -rf glibc-$CVSVER
+tar xvf $CWD/glibc-$CVSVER.tar.xz \
+  || tar xvf $CWD/glibc-$CVSVER.tar.bz2 \
+  || tar xvf $CWD/glibc-$CVSVER.tar.gz
+cd glibc-$CVSVER
+
+chown -R root:root .
+find . -perm 666 -exec chmod 644 {} \;
+find . -perm 664 -exec chmod 644 {} \;
+find . -perm 600 -exec chmod 644 {} \;
+find . -perm 444 -exec chmod 644 {} \;
+find . -perm 400 -exec chmod 644 {} \;
+find . -perm 440 -exec chmod 644 {} \;
+find . -perm 777 -exec chmod 755 {} \;
+find . -perm 775 -exec chmod 755 {} \;
+find . -perm 511 -exec chmod 755 {} \;
+find . -perm 711 -exec chmod 755 {} \;
+find . -perm 555 -exec chmod 755 {} \;
+
+# Clean up leftover CVS directories:
+find . -type d -name CVS -exec rm -r {} \; 2> /dev/null
+
+# Apply patches; exit if any fail.
+apply_patches
+if [ ! $? = 0 ]; then
+  exit 1
+fi
+
+# Make build directory:
+mkdir build-glibc-$VERSION
+cd build-glibc-$VERSION || exit 1
+
+echo "BUILDING DAS NPTL GLIBC"
+CFLAGS="-g $OPTIMIZ" \
+../configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-kernel=2.6.32 \
+  --with-headers=/usr/include \
+  --enable-add-ons \
+  --enable-obsolete-nsl \
+  --enable-obsolete-rpc \
+  --enable-profile \
+  $DISABLE_NSCD \
+  $WERROR \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --with-tls \
+  --with-__thread \
+  --without-cvs \
+  $TARGET-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install install_root=$PKG || exit 1
+make localedata/install-locales install_root=$PKG || exit 1
+
+# The prevailing standard seems to be putting unstripped libraries in
+# /usr/lib/debug/ and stripping the debugging symbols from all the other
+# libraries.
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/debug
+cp -a $PKG/lib${LIBDIRSUFFIX}/l*.so* $PKG/usr/lib${LIBDIRSUFFIX}/debug
+cp -a $PKG/usr/lib${LIBDIRSUFFIX}/*.a $PKG/usr/lib${LIBDIRSUFFIX}/debug
+# Don't need debug+profile:
+( cd $PKG/usr/lib${LIBDIRSUFFIX}/debug ; rm -f *_p.* )
+# NOTE:  Is there really a reason for the glibc-debug package?
+# If you're debugging glibc, you can also compile it, right?
+
+## COMMENTED OUT:  There's no reason for profile libs to include -g information.
+## Put back unstripped profiling libraries:
+#mv $PKG/usr/lib${LIBDIRSUFFIX}/debug/*_p.a $PKG/usr/lib${LIBDIRSUFFIX}
+# It might be best to put the unstripped and profiling libraries in glibc-debug and glibc-profile.
+
+# I don't think "strip -g" causes the pthread problems.  It's --strip-unneeded that does.
+strip -g $PKG/lib${LIBDIRSUFFIX}/l*.so*
+strip -g $PKG/usr/lib${LIBDIRSUFFIX}/l*.so*
+strip -g $PKG/usr/lib${LIBDIRSUFFIX}/lib*.a
+
+# Remove the rquota.x and rquota.h include files, as they are provided by
+# the quota package:
+rm -f $PKG/usr/include/rpcsvc/rquota.{h,x}
+
+# Back to the sources dir to add some files/docs:
+cd $TMP/glibc-$CVSVER
+
+# We'll automatically install the config file for the Name Server Cache Daemon.
+# Perhaps this should also have some commented-out startup code in rc.inet2...
+mkdir -p $PKG/etc
+cat nscd/nscd.conf > $PKG/etc/nscd.conf.new
+
+# Install docs:
+( mkdir -p $PKG/usr/doc/glibc-$VERSION
+  cp -a \
+    BUGS CONFORMANCE COPYING* FAQ INSTALL LICENSES NAMESPACE \
+    NEWS NOTES PROJECTS README* \
+    $PKG/usr/doc/glibc-$VERSION
+)
+
+# Trim the NEWS file to omit ancient history:
+if [ -r NEWS ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/glibc-$VERSION)
+  cat NEWS | head -n 1000 > $DOCSDIR/NEWS
+  touch -r NEWS $DOCSDIR/NEWS
+fi
+
+# OK, there are some very old Linux standards that say that any binaries in a /bin or
+# /sbin directory (and the directories themselves) should be group bin rather than
+# group root, unless a specific group is really needed for some reason.
+#
+# I can't find any mention of this in more recent standards docs, and always thought
+# that it was pretty cosmetic anyway (hey, if there's a reason -- fill me in!), so
+# it's possible that this ownership change won't be followed in the near future
+# (it's a PITA, and causes many bug reports when the perms change is occasionally
+# forgotten).
+#
+# But, it's hard to get me to break old habits, so we'll continue the tradition here:
+#
+# No, no we won't.  You know how we love to break traditions.
+
+# Strip most binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
+)
+
+# Fix info dir:
+rm $PKG/usr/info/dir
+gzip -9 $PKG/usr/info/*
+
+# This is junk
+rm $PKG/etc/ld.so.cache
+( cd $PKG
+  find . -name "*.orig" -exec rm {} \;
+)
+
+##################################
+# OK, time to make some packages #
+##################################
+
+# glibc-profile:
+cd $PPROFILE
+mkdir -p usr/lib${LIBDIRSUFFIX}
+# Might as well just grab these with 'mv' to simplify things later:
+mv $PKG/usr/lib${LIBDIRSUFFIX}/lib*_p.a usr/lib${LIBDIRSUFFIX}
+# Profile libs should be stripped.  Use the debug libs to debug...
+( cd usr/lib${LIBDIRSUFFIX} ; strip -g *.a )
+mkdir install
+cp -a $CWD/slack-desc.glibc-profile install/slack-desc
+makepkg -l y -c n $TMP/glibc-profile-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
+
+# THIS IS NO LONGER PACKAGED (or is it?  might be better to let it be made, and then ship it or not...)
+# glibc-debug:
+cd $PDEBUG
+mkdir -p usr/lib${LIBDIRSUFFIX}
+# Might as well just grab these with 'mv' to simplify things later:
+mv $PKG/usr/lib${LIBDIRSUFFIX}/debug usr/lib${LIBDIRSUFFIX}
+mkdir install
+cp -a $CWD/slack-desc.glibc-debug install/slack-desc
+## Don't package this:
+#makepkg -l y -c n $TMP/glibc-debug-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
+## INSTEAD, NUKE THESE LIBS
+#rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/debug
+
+# glibc-i18n:
+cd $PI18N
+mkdir -p usr/lib${LIBDIRSUFFIX}/locale
+mv $PKG/usr/lib${LIBDIRSUFFIX}/locale/* usr/lib${LIBDIRSUFFIX}/locale
+mkdir -p usr/share/{i18n,locale}
+mv $PKG/usr/share/i18n/* usr/share/i18n
+mv $PKG/usr/share/locale/* usr/share/locale
+# Leave copies of the C, POSIX, and en_US locales in the main glibc package:
+cp -a usr/lib${LIBDIRSUFFIX}/locale/{C,en_US}* $PKG/usr/lib${LIBDIRSUFFIX}/locale
+mkdir -p $PKG/usr/share/i18n/locales
+cp -a usr/share/i18n/locales/{C,POSIX,en_US} $PKG/usr/share/i18n/locales
+mkdir install
+cp -a $CWD/slack-desc.glibc-i18n install/slack-desc
+makepkg -l y -c n $TMP/glibc-i18n-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
+
+# glibc-solibs:
+cd $PSOLIBS
+mkdir -p etc/profile.d
+cp -a $CWD/profile.d/* etc/profile.d
+chown -R root:root etc
+chmod 755 etc/profile.d/*
+mkdir -p lib${LIBDIRSUFFIX}
+cp -a $PKG/lib${LIBDIRSUFFIX}/* lib${LIBDIRSUFFIX}
+( cd lib${LIBDIRSUFFIX}
+  mkdir incoming
+  mv *so* incoming
+  mv incoming/libSegFault.so .
+)
+mkdir -p usr
+cp -a $PKG/usr/bin usr
+mv usr/bin/ldd .
+rm usr/bin/*
+mv ldd usr/bin
+mkdir -p usr/lib${LIBDIRSUFFIX}
+# The gconv directory has a lot of stuff, but including it here will save some problems.
+# Seems standard elsewhere.
+cp -a $PKG/usr/lib${LIBDIRSUFFIX}/gconv usr/lib${LIBDIRSUFFIX}
+# Another manpage abandoned by GNU...
+#mkdir -p usr/man/man1
+#cp -a $PKG/usr/man/man1/ldd.1.gz usr/man/man1
+mkdir -p usr/libexec
+cp -a $PKG/usr/libexec/pt_chown usr/libexec
+# Same usr.bin deal:
+cp -a $PKG/sbin .
+mv sbin/ldconfig .
+rm sbin/*
+mv ldconfig sbin
+mkdir install
+cp -a $CWD/slack-desc.glibc-solibs install/slack-desc
+cp -a $CWD/doinst.sh-glibc-solibs install/doinst.sh
+fix_doinst
+sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh
+# Ditch links:
+find . -type l -exec rm {} \;
+# Build the package:
+makepkg -l y -c n $TMP/glibc-solibs-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
+
+# And finally, the complete "all-in-one" glibc package is created
+# from whatever was leftover:
+cd $PGLIBC
+mv $PKG/* .
+mkdir -p etc/profile.d
+cp -a $CWD/profile.d/* etc/profile.d
+chown -R root:root etc
+chmod 755 etc/profile.d/*
+# Ditch links (these are in doinst.sh-glibc):
+find . -type l -exec rm {} \;
+# libm.so is *not* a linker script on all $ARCH.
+# If it's missing now, replace the symlink:
+if [ ! -r usr/lib${LIBDIRSUFFIX}/libm.so ]; then
+  ( cd usr/lib${LIBDIRSUFFIX} ; ln -sf ../../lib${LIBDIRSUFFIX}/libm.so.6 libm.so )
+fi
+mkdir install
+cp -a $CWD/slack-desc.glibc install/slack-desc
+cp -a $CWD/doinst.sh-glibc install/doinst.sh
+fix_doinst
+sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh
+( cd lib${LIBDIRSUFFIX}
+  mkdir incoming
+  mv *so* incoming
+  mv incoming/libSegFault.so .
+)
+# Build the package:
+/sbin/makepkg -l y -c n $TMP/glibc-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
+
+# Done!
+echo
+echo "glibc packages built in $TMP!"
+
diff --git a/testing/source/glibc/glibc.locale.no-archive.diff b/testing/source/glibc/glibc.locale.no-archive.diff
new file mode 100644
index 00000000..4b2828ba
--- /dev/null
+++ b/testing/source/glibc/glibc.locale.no-archive.diff
@@ -0,0 +1,10 @@
+--- ./localedata/Makefile.orig	2018-02-04 23:06:03.700212576 -0600
++++ ./localedata/Makefile	2018-02-04 23:07:10.102218076 -0600
+@@ -223,6 +223,7 @@
+ 	echo -n '...'; \
+ 	input=`echo $$locale | sed 's/\([^.]*\)[^@]*\(.*\)/\1\2/'`; \
+ 	$(LOCALEDEF) $$flags --alias-file=../intl/locale.alias \
++		     --no-archive \
+ 		     -i locales/$$input -f charmaps/$$charset \
+ 		     $(addprefix --prefix=,$(install_root)) $$locale \
+ 	&& echo ' done'; \
diff --git a/testing/source/glibc/glibc.ru_RU.CP1251.diff b/testing/source/glibc/glibc.ru_RU.CP1251.diff
new file mode 100644
index 00000000..376cf76a
--- /dev/null
+++ b/testing/source/glibc/glibc.ru_RU.CP1251.diff
@@ -0,0 +1,10 @@
+--- ./localedata/SUPPORTED.orig	2005-07-17 20:50:35.000000000 -0500
++++ ./localedata/SUPPORTED	2006-08-22 01:33:09.000000000 -0500
+@@ -270,6 +270,7 @@
+ ro_RO/ISO-8859-2 \
+ ru_RU.KOI8-R/KOI8-R \
+ ru_RU.UTF-8/UTF-8 \
++ru_RU.CP1251/CP1251 \
+ ru_RU/ISO-8859-5 \
+ ru_UA.UTF-8/UTF-8 \
+ ru_UA/KOI8-U \
diff --git a/testing/source/glibc/profile.d/glibc.csh.new b/testing/source/glibc/profile.d/glibc.csh.new
new file mode 100755
index 00000000..1f33e966
--- /dev/null
+++ b/testing/source/glibc/profile.d/glibc.csh.new
@@ -0,0 +1,9 @@
+#!/bin/csh
+# Set more relaxed (glibc-2.3.5 like) malloc() checking.
+#
+# This relaxes the default paranoia level so that it reports
+# bugs, but does not kill the questionable process.  You can
+# get away with running broken programs with this setting,
+# but at a possible performance and security cost.
+#
+#setenv MALLOC_CHECK_ 1
diff --git a/testing/source/glibc/profile.d/glibc.sh.new b/testing/source/glibc/profile.d/glibc.sh.new
new file mode 100755
index 00000000..979f4879
--- /dev/null
+++ b/testing/source/glibc/profile.d/glibc.sh.new
@@ -0,0 +1,8 @@
+#!/bin/sh
+# Set more relaxed (glibc-2.3.5 like) malloc() checking.
+#
+# This relaxes the default paranoia level so that it reports
+# bugs, but does not kill the questionable process.  You can
+# get away with running broken programs with this setting,
+# but at a possible performance and security cost.
+#export MALLOC_CHECK_=1
diff --git a/testing/source/glibc/slack-desc.glibc b/testing/source/glibc/slack-desc.glibc
new file mode 100644
index 00000000..0deb19d1
--- /dev/null
+++ b/testing/source/glibc/slack-desc.glibc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+glibc: glibc (GNU C libraries)
+glibc:
+glibc: This package contains the GNU C libraries and header files. The GNU
+glibc: C library was written originally by Roland McGrath, and is currently
+glibc: maintained by Ulrich Drepper. Some parts of the library were
+glibc: contributed or worked on by other people.
+glibc:
+glibc: You'll need this package to compile programs.
+glibc:
+glibc:
+glibc:
diff --git a/testing/source/glibc/slack-desc.glibc-debug b/testing/source/glibc/slack-desc.glibc-debug
new file mode 100644
index 00000000..8cb64d59
--- /dev/null
+++ b/testing/source/glibc/slack-desc.glibc-debug
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+glibc-debug: glibc-debug (GNU C libraries with debugging symbols)
+glibc-debug:
+glibc-debug: This package contains versions of the GNU C libraries with debugging
+glibc-debug: information. These are needed only if you wish to be able to step
+glibc-debug: through C library routines while debugging programs. Most debugging
+glibc-debug: efforts will not require these.
+glibc-debug: To use these libraries, set LD_LIBRARY_PATH when calling the debugger:
+glibc-debug:  LD_LIBRARY_PATH=/usr/lib/debug gdb <executable>
+glibc-debug:
+glibc-debug: Or, use this approach if you need to debug a setuid binary:
+glibc-debug:  su user -c "LD_LIBRARY_PATH=/usr/lib/debug gdb <executable>"
diff --git a/testing/source/glibc/slack-desc.glibc-i18n b/testing/source/glibc/slack-desc.glibc-i18n
new file mode 100644
index 00000000..a697bc3d
--- /dev/null
+++ b/testing/source/glibc/slack-desc.glibc-i18n
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+glibc-i18n: glibc-i18n (locale files from glibc)
+glibc-i18n:
+glibc-i18n: These files go in /usr/lib/locale, /usr/share/i18n/, and
+glibc-i18n: /usr/share/locale/ to provide internationalization support.
+glibc-i18n: You'll need this package unless you will be using US English only.
+glibc-i18n:
+glibc-i18n:
+glibc-i18n:
+glibc-i18n:
+glibc-i18n:
+glibc-i18n:
diff --git a/testing/source/glibc/slack-desc.glibc-profile b/testing/source/glibc/slack-desc.glibc-profile
new file mode 100644
index 00000000..4b4100e0
--- /dev/null
+++ b/testing/source/glibc/slack-desc.glibc-profile
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+glibc-profile: glibc-profile (GNU C libraries with profiling support)
+glibc-profile:
+glibc-profile: This package contains static versions of the GNU C libraries with 
+glibc-profile: support for profiling binaries using gprof. gprof calculates how
+glibc-profile: much time a program spends in each routine which can suggest where
+glibc-profile: to concentrate efforts to improve performance.
+glibc-profile:
+glibc-profile: See the gprof man page for more details.
+glibc-profile:
+glibc-profile:
+glibc-profile:
diff --git a/testing/source/glibc/slack-desc.glibc-solibs b/testing/source/glibc/slack-desc.glibc-solibs
new file mode 100644
index 00000000..a538452f
--- /dev/null
+++ b/testing/source/glibc/slack-desc.glibc-solibs
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+glibc-solibs: glibc-solibs (shared GNU C libraries)
+glibc-solibs:
+glibc-solibs: This package contains the shared libraries, binaries, and support
+glibc-solibs: files required to run most Linux applications linked with glibc.
+glibc-solibs:
+glibc-solibs:
+glibc-solibs:
+glibc-solibs:
+glibc-solibs:
+glibc-solibs:
+glibc-solibs: