diff options
Diffstat (limited to 'testing/source/wpa_supplicant')
16 files changed, 0 insertions, 1098 deletions
diff --git a/testing/source/wpa_supplicant/README.slackware b/testing/source/wpa_supplicant/README.slackware deleted file mode 100644 index 7ab40a28..00000000 --- a/testing/source/wpa_supplicant/README.slackware +++ /dev/null @@ -1,55 +0,0 @@ -================================================= -How do I get my card to use WPA-PSK in Slackware? -================================================= - -First off: wpa_supplicant REQUIRES the AP to broadcast the SSID. When the AP -hides its SSID, all you will get out of wpa_supplicant is the message: -"No suitable AP found" - -Also, read the MADwifi FAQ (http://madwifi.sourceforge.net/dokuwiki/doku.php) -since it contains a wealth of information. - -This being said, you'll have to do the following (as root): -Edit the file named /etc/wpa_supplicant.conf and add these lines: - -network={ - scan_ssid=0 - proto=WPA - key_mgmt=WPA-PSK - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 -} - -Then execute: - -/usr/sbin/wpa_passphrase YOURSSID passphrase - -with the SSID of your AP and the passphrase you've entered in its WPA-PSK configuration. You'll receive an output, which looks like this: - -network={ - ssid="YOURSSID" - #psk="passphrase" - -psk=66a4bfb03de5656cf26cfa03a116097546046f4aea11ee044b841171207d8308 -} - -Copy the three lines within the network-tag into your own entry in wpa_supplicant.conf and change the permissions after you've finished editing: - -chmod 640 /etc/wpa_supplicant.conf - -To get your network device up and running, execute: - -### /usr/sbin/wpa_supplicant -Bw -c/etc/wpa_supplicant.conf -iath0 -Dmadwifi ### -### you don't have to run the above command by hand, because it will ### -### be executed by the rc.inet1 command that you run: ### - -/etc/rc.d/rc.inet1 ath0_start - -In case you want to see the wpa_supplicant in action, start it on the command line before enabling the wireless device, by running: -/usr/sbin/wpa_supplicant -dw -c/etc/wpa_supplicant.conf -iath0 -Dmadwifi -The terminal where you've started the wpa_supplicant should now show the communication between your wlan card and the AP. If you got everything up and running you can let Slackware's init script take over by killing wpa_supplicant and running: - -/etc/rc.d/rc.inet1 ath0_restart - -Studying the wpa_supplicant README is also highly recommended for further insight! - diff --git a/testing/source/wpa_supplicant/config/dot.config b/testing/source/wpa_supplicant/config/dot.config deleted file mode 100644 index 966a98c2..00000000 --- a/testing/source/wpa_supplicant/config/dot.config +++ /dev/null @@ -1,599 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# wpa_supplicant binary. All lines starting with # are ignored. Configuration -# option lines must be commented out complete, if they are not to be included, -# i.e., just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Driver interface for generic Linux wireless extensions -# Note: WEXT is deprecated in the current Linux kernel version and no new -# functionality is added to it. nl80211-based interface is the new -# replacement for WEXT and its use allows wpa_supplicant to properly control -# the driver to improve existing functionality like roaming and to support new -# functionality. -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y - -# QCA vendor extensions to nl80211 -CONFIG_DRIVER_NL80211_QCA=y - -# driver_nl80211.c requires libnl. If you are compiling it yourself -# you may need to point hostapd to your version of libnl. -# -#CFLAGS += -I$<path to libnl include files> -#LIBS += -L$<path to libnl library files> - -# Use libnl v2.0 (or 3.0) libraries. -#CONFIG_LIBNL20=y - -# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) -CONFIG_LIBNL32=y - - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for MACsec capable Qualcomm Atheros drivers -#CONFIG_DRIVER_MACSEC_QCA=y - -# Driver interface for Linux MACsec drivers -CONFIG_DRIVER_MACSEC_LINUX=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Solaris libraries -#LIBS += -lsocket -ldlpi -lnsl -#LIBS_c += -lsocket - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or -# MACsec is included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed -# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., -# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. -CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-pwd (secure authentication using only a password) -#CONFIG_EAP_PWD=y - -# EAP-PAX -CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -CONFIG_EAP_SAKE=y - -# EAP-GPSK -CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y -# Enable WPS external registrar functionality -#CONFIG_WPS_ER=y -# Disable credentials for an open network by default when acting as a WPS -# registrar. -#CONFIG_WPS_REG_DISABLE_OPEN=y -# Enable WPS support with NFC config method -#CONFIG_WPS_NFC=y - -# EAP-IKEv2 -CONFIG_EAP_IKEV2=y - -# EAP-EKE -#CONFIG_EAP_EKE=y - -# MACsec -CONFIG_MACSEC=y - -# Peerkey support: -CONFIG_PEERKEY=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) -#CONFIG_HT_OVERRIDES=y - -# Support VHT overrides (disable VHT, mask MCS rates, etc.) -#CONFIG_VHT_OVERRIDES=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# udp6 = UDP IPv6 sockets using localhost (::1) -# named_pipe = Windows Named Pipe (default for Windows) -# udp-remote = UDP sockets with remote access (only for tests systems/purpose) -# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -CONFIG_READLINE=y - -# Include internal line edit mode in wpa_cli. This can be used as a replacement -# for GNU Readline to provide limited command line editing and history support. -#CONFIG_WPA_CLI_EDIT=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operating system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -#CONFIG_ELOOP=eloop - -# Should we use poll instead of select? Select is used by default. -#CONFIG_ELOOP_POLL=y - -# Should we use epoll instead of select? Select is used by default. -#CONFIG_ELOOP_EPOLL=y - -# Should we use kqueue instead of select? Select is used by default. -#CONFIG_ELOOP_KQUEUE=y - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# Disable Linux packet socket workaround applicable for station interface -# in a bridge for EAPOL frames. This should be uncommented only if the kernel -# is known to not have the regression issue in packet socket behavior with -# bridge interfaces (commit 'bridge: respect RFC2863 operational state')'). -#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y - -# IEEE 802.11w (management frame protection), also known as PMF -# Driver support is also needed for IEEE 802.11w. -CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS -# internal = Internal TLSv1 implementation (experimental) -# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental) -# none = Empty template -CONFIG_TLS=openssl - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) -# can be enabled to get a stronger construction of messages when block ciphers -# are used. It should be noted that some existing TLS v1.0 -based -# implementation may not be compatible with TLS v1.1 message (ClientHello is -# sent prior to negotiating which version will be used) -CONFIG_TLSV11=y - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) -# can be enabled to enable use of stronger crypto algorithms. It should be -# noted that some existing TLS v1.0 -based implementation may not be compatible -# with TLS v1.2 message (ClientHello is sent prior to negotiating which version -# will be used) -#CONFIG_TLSV12=y - -# Select which ciphers to use by default with OpenSSL if the user does not -# specify them. -#CONFIG_TLS_DEFAULT_CIPHERS="PROFILE=SYSTEM:3DES" -CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT@SECLEVEL=1" - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode -CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -CONFIG_DEBUG_FILE=y - -# Send debug messages to syslog instead of stdout -CONFIG_DEBUG_SYSLOG=y -# Set syslog facility for debug messages -#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON - -# Add support for sending all debug messages (regardless of debug verbosity) -# to the Linux kernel tracing facility. This helps debug the entire stack by -# making it easy to record everything happening from the driver up into the -# same file, e.g., using trace-cmd. -#CONFIG_DEBUG_LINUX_TRACING=y - -# Add support for writing debug log to Android logcat instead of standard -# output -#CONFIG_ANDROID_LOG=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, uncomment these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, uncomment these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -# wpa_supplicant depends on strong random number generation being available -# from the operating system. os_get_random() function is used to fetch random -# data when needed, e.g., for key generation. On Linux and BSD systems, this -# works by reading /dev/urandom. It should be noted that the OS entropy pool -# needs to be properly initialized before wpa_supplicant is started. This is -# important especially on embedded devices that do not have a hardware random -# number generator and may by default start up with minimal entropy available -# for random number generation. -# -# As a safety net, wpa_supplicant is by default trying to internally collect -# additional entropy for generating random data to mix in with the data fetched -# from the OS. This by itself is not considered to be very strong, but it may -# help in cases where the system pool is not initialized properly. However, it -# is very strongly recommended that the system pool is initialized with enough -# entropy either by using hardware assisted random number generator or by -# storing state over device reboots. -# -# wpa_supplicant can be configured to maintain its own entropy store over -# restarts to enhance random number generation. This is not perfect, but it is -# much more secure than using the same sequence of random numbers after every -# reboot. This can be enabled with -e<entropy file> command line option. The -# specified file needs to be readable and writable by wpa_supplicant. -# -# If the os_get_random() is known to provide strong random data (e.g., on -# Linux/BSD, the board in question is known to have reliable source of random -# data from /dev/urandom), the internal wpa_supplicant random pool can be -# disabled. This will save some in binary size and CPU use. However, this -# should only be considered for builds that are known to be used on devices -# that meet the requirements described above. -#CONFIG_NO_RANDOM_POOL=y - -# IEEE 802.11n (High Throughput) support (mainly for AP mode) -CONFIG_IEEE80211N=y - -# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) -# (depends on CONFIG_IEEE80211N) -CONFIG_IEEE80211AC=y - -# Wireless Network Management (IEEE Std 802.11v-2011) -# Note: This is experimental and not complete implementation. -#CONFIG_WNM=y - -# Interworking (IEEE 802.11u) -# This can be used to enable functionality to improve interworking with -# external networks (GAS/ANQP to learn more about the networks and network -# selection based on available credentials). -#CONFIG_INTERWORKING=y - -# Hotspot 2.0 -#CONFIG_HS20=y - -# Enable interface matching in wpa_supplicant -#CONFIG_MATCH_IFACE=y - -# Disable roaming in wpa_supplicant -#CONFIG_NO_ROAMING=y - -# AP mode operations with wpa_supplicant -# This can be used for controlling AP mode operations with wpa_supplicant. It -# should be noted that this is mainly aimed at simple cases like -# WPA2-Personal while more complex configurations like WPA2-Enterprise with an -# external RADIUS server can be supported with hostapd. -CONFIG_AP=y - -# P2P (Wi-Fi Direct) -# This can be used to enable P2P support in wpa_supplicant. See README-P2P for -# more information on P2P operations. -CONFIG_P2P=y - -# Enable TDLS support -#CONFIG_TDLS=y - -# Wi-Fi Direct -# This can be used to enable Wi-Fi Direct extensions for P2P using an external -# program to control the additional information exchanges in the messages. -CONFIG_WIFI_DISPLAY=y - -# Autoscan -# This can be used to enable automatic scan support in wpa_supplicant. -# See wpa_supplicant.conf for more information on autoscan usage. -# -# Enabling directly a module will enable autoscan support. -# For exponential module: -#CONFIG_AUTOSCAN_EXPONENTIAL=y -# For periodic module: -#CONFIG_AUTOSCAN_PERIODIC=y - -# Password (and passphrase, etc.) backend for external storage -# These optional mechanisms can be used to add support for storing passwords -# and other secrets in external (to wpa_supplicant) location. This allows, for -# example, operating system specific key storage to be used -# -# External password backend for testing purposes (developer use) -#CONFIG_EXT_PASSWORD_TEST=y - -# Enable Fast Session Transfer (FST) -#CONFIG_FST=y - -# Enable CLI commands for FST testing -#CONFIG_FST_TEST=y - -# OS X builds. This is only for building eapol_test. -#CONFIG_OSX=y - -# Automatic Channel Selection -# This will allow wpa_supplicant to pick the channel automatically when channel -# is set to "0". -# -# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative -# to "channel=0". This would enable us to eventually add other ACS algorithms in -# similar way. -# -# Automatic selection is currently only done through initialization, later on -# we hope to do background checks to keep us moving to more ideal channels as -# time goes by. ACS is currently only supported through the nl80211 driver and -# your driver must have survey dump capability that is filled by the driver -# during scanning. -# -# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with -# a newly to create wpa_supplicant.conf variable acs_num_scans. -# -# Supported ACS drivers: -# * ath9k -# * ath5k -# * ath10k -# -# For more details refer to: -# http://wireless.kernel.org/en/users/Documentation/acs -#CONFIG_ACS=y - -# Support Multi Band Operation -#CONFIG_MBO=y - -# Fast Initial Link Setup (FILS) (IEEE 802.11ai) -# Note: This is an experimental and not yet complete implementation. This -# should not be enabled for production use. -#CONFIG_FILS=y -# FILS shared key authentication with PFS -#CONFIG_FILS_SK_PFS=y - -# Support RSN on IBSS networks -# This is needed to be able to use mode=1 network profile with proto=RSN and -# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None). -CONFIG_IBSS_RSN=y - -# External PMKSA cache control -# This can be used to enable control interface commands that allow the current -# PMKSA cache entries to be fetched and new entries to be added. -#CONFIG_PMKSA_CACHE_EXTERNAL=y - -# Mesh Networking (IEEE 802.11s) -#CONFIG_MESH=y - -# Background scanning modules -# These can be used to request wpa_supplicant to perform background scanning -# operations for roaming within an ESS (same SSID). See the bgscan parameter in -# the wpa_supplicant.conf file for more details. -# Periodic background scans based on signal strength -CONFIG_BGSCAN_SIMPLE=y -# Learn channels used by the network and try to avoid bgscans on other -# channels (experimental) -#CONFIG_BGSCAN_LEARN=y - -# Opportunistic Wireless Encryption (OWE) -# Experimental implementation of draft-harkins-owe-07.txt -#CONFIG_OWE=y diff --git a/testing/source/wpa_supplicant/config/wpa_gui.desktop b/testing/source/wpa_supplicant/config/wpa_gui.desktop deleted file mode 100644 index 31b8b6b0..00000000 --- a/testing/source/wpa_supplicant/config/wpa_gui.desktop +++ /dev/null @@ -1,7 +0,0 @@ -[Desktop Entry] -Name=wpa_gui -Comment[en]=Wpa_supplicant management -Exec=kdesu wpa_gui -Icon=wpa_gui -Type=Application -Categories=Qt;Network; diff --git a/testing/source/wpa_supplicant/config/wpa_gui.png b/testing/source/wpa_supplicant/config/wpa_gui.png Binary files differdeleted file mode 100644 index a72f3569..00000000 --- a/testing/source/wpa_supplicant/config/wpa_gui.png +++ /dev/null diff --git a/testing/source/wpa_supplicant/config/wpa_supplicant.conf b/testing/source/wpa_supplicant/config/wpa_supplicant.conf deleted file mode 100644 index 4dbbf96a..00000000 --- a/testing/source/wpa_supplicant/config/wpa_supplicant.conf +++ /dev/null @@ -1,2 +0,0 @@ -ctrl_interface=/var/run/wpa_supplicant -ctrl_interface_group=root diff --git a/testing/source/wpa_supplicant/config/wpa_supplicant.logrotate b/testing/source/wpa_supplicant/config/wpa_supplicant.logrotate deleted file mode 100644 index bd7ef91c..00000000 --- a/testing/source/wpa_supplicant/config/wpa_supplicant.logrotate +++ /dev/null @@ -1,6 +0,0 @@ -/var/log/wpa_supplicant.log { - missingok - notifempty - size 30k - create 0600 root root -} diff --git a/testing/source/wpa_supplicant/doinst.sh b/testing/source/wpa_supplicant/doinst.sh deleted file mode 100644 index 6052fca4..00000000 --- a/testing/source/wpa_supplicant/doinst.sh +++ /dev/null @@ -1,15 +0,0 @@ -config() { - NEW="$1" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then - # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} - -config etc/wpa_supplicant.conf.new -config etc/logrotate.d/wpa_supplicant.new diff --git a/testing/source/wpa_supplicant/patches/allow-tlsv1.patch b/testing/source/wpa_supplicant/patches/allow-tlsv1.patch deleted file mode 100644 index eb5fb781..00000000 --- a/testing/source/wpa_supplicant/patches/allow-tlsv1.patch +++ /dev/null @@ -1,22 +0,0 @@ -From: Andrej Shadura <andrewsh@debian.org> -Subject: Enable TLSv1.0 by default - -OpenSSL 1.1.1 disables TLSv1.0 by default and sets the security level to 2. -Some older networks may support for TLSv1.0 and less secure cyphers. - ---- a/src/crypto/tls_openssl.c -+++ b/src/crypto/tls_openssl.c -@@ -988,6 +988,13 @@ - os_free(data); - return NULL; - } -+ -+#ifndef EAP_SERVER_TLS -+ /* Enable TLSv1.0 by default to allow connecting to legacy -+ * networks since Debian OpenSSL is set to minimum TLSv1.2 and SECLEVEL=2. */ -+ SSL_CTX_set_min_proto_version(ssl, TLS1_VERSION); -+#endif -+ - data->ssl = ssl; - if (conf) - data->tls_session_lifetime = conf->tls_session_lifetime; diff --git a/testing/source/wpa_supplicant/patches/wpa_supplicant-2.7-fix-undefined-remove-ie.patch b/testing/source/wpa_supplicant/patches/wpa_supplicant-2.7-fix-undefined-remove-ie.patch deleted file mode 100644 index 97a8cc7f..00000000 --- a/testing/source/wpa_supplicant/patches/wpa_supplicant-2.7-fix-undefined-remove-ie.patch +++ /dev/null @@ -1,38 +0,0 @@ -From f2973fa39d6109f0f34969e91551a98dc340d537 Mon Sep 17 00:00:00 2001 -From: Jouni Malinen <j@w1.fi> -Date: Mon, 3 Dec 2018 12:00:26 +0200 -Subject: FT: Fix CONFIG_IEEE80211X=y build without CONFIG_FILS=y - -remove_ie() was defined within an ifdef CONFIG_FILS block while it is -now needed even without CONFIG_FILS=y. Remove the CONFIG_FILS condition -there. - -Fixes 8c41734e5de1 ("FT: Fix Reassociation Request IEs during FT protocol") -Signed-off-by: Jouni Malinen <j@w1.fi> ---- - wpa_supplicant/sme.c | 2 -- - 1 file changed, 2 deletions(-) - -diff --git a/wpa_supplicant/sme.c b/wpa_supplicant/sme.c -index 39c8069..f77f751 100644 ---- a/wpa_supplicant/sme.c -+++ b/wpa_supplicant/sme.c -@@ -1386,7 +1386,6 @@ void sme_event_auth(struct wpa_supplicant *wpa_s, union wpa_event_data *data) - } - - --#ifdef CONFIG_FILS - #ifdef CONFIG_IEEE80211R - static void remove_ie(u8 *buf, size_t *len, u8 eid) - { -@@ -1401,7 +1400,6 @@ static void remove_ie(u8 *buf, size_t *len, u8 eid) - } - } - #endif /* CONFIG_IEEE80211R */ --#endif /* CONFIG_FILS */ - - - void sme_associate(struct wpa_supplicant *wpa_s, enum wpas_mode mode, --- -cgit v0.12 - diff --git a/testing/source/wpa_supplicant/patches/wpa_supplicant-assoc-timeout.patch b/testing/source/wpa_supplicant/patches/wpa_supplicant-assoc-timeout.patch deleted file mode 100644 index c3b3568c..00000000 --- a/testing/source/wpa_supplicant/patches/wpa_supplicant-assoc-timeout.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff -up wpa_supplicant-0.7.3/wpa_supplicant/wpa_supplicant.c.assoc-timeout wpa_supplicant-0.7.3/wpa_supplicant/wpa_supplicant.c ---- wpa_supplicant-0.7.3/wpa_supplicant/wpa_supplicant.c.assoc-timeout 2010-09-07 10:43:39.000000000 -0500 -+++ wpa_supplicant-0.7.3/wpa_supplicant/wpa_supplicant.c 2010-12-07 18:57:45.163457000 -0600 -@@ -1262,10 +1262,10 @@ void wpa_supplicant_associate(struct wpa - - if (assoc_failed) { - /* give IBSS a bit more time */ -- timeout = ssid->mode == WPAS_MODE_IBSS ? 10 : 5; -+ timeout = ssid->mode == WPAS_MODE_IBSS ? 20 : 10; - } else if (wpa_s->conf->ap_scan == 1) { - /* give IBSS a bit more time */ -- timeout = ssid->mode == WPAS_MODE_IBSS ? 20 : 10; -+ timeout = ssid->mode == WPAS_MODE_IBSS ? 20 : 20; - } - wpa_supplicant_req_auth_timeout(wpa_s, timeout, 0); - } diff --git a/testing/source/wpa_supplicant/patches/wpa_supplicant-dbus-service-file-args.patch b/testing/source/wpa_supplicant/patches/wpa_supplicant-dbus-service-file-args.patch deleted file mode 100644 index b7478dad..00000000 --- a/testing/source/wpa_supplicant/patches/wpa_supplicant-dbus-service-file-args.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -up wpa_supplicant-0.7.3/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in.fedora wpa_supplicant-0.7.3/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in ---- wpa_supplicant-0.7.3/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in.fedora 2008-03-02 20:58:35.000000000 -0500 -+++ wpa_supplicant-0.7.3/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in 2008-03-02 20:58:41.000000000 -0500 -@@ -1,5 +1,5 @@ - [D-BUS Service] - Name=fi.w1.wpa_supplicant1 --Exec=@BINDIR@/wpa_supplicant -u -+Exec=@BINDIR@/wpa_supplicant -B -u -f /var/log/wpa_supplicant.log -c /etc/wpa_supplicant/wpa_supplicant.conf -P /var/run/wpa_supplicant.pid - User=root - SystemdService=wpa_supplicant.service -diff -up wpa_supplicant-0.7.3/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in.fedora wpa_supplicant-0.7.3/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in ---- wpa_supplicant-0.7.3/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in.fedora 2008-03-02 20:58:35.000000000 -0500 -+++ wpa_supplicant-0.7.3/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in 2008-03-02 20:58:41.000000000 -0500 -@@ -1,5 +1,5 @@ - [D-BUS Service] - Name=fi.epitest.hostap.WPASupplicant --Exec=@BINDIR@/wpa_supplicant -u -+Exec=@BINDIR@/wpa_supplicant -B -u -f /var/log/wpa_supplicant.log -c /etc/wpa_supplicant/wpa_supplicant.conf -P /var/run/wpa_supplicant.pid - User=root - SystemdService=wpa_supplicant.service diff --git a/testing/source/wpa_supplicant/patches/wpa_supplicant-flush-debug-output.patch b/testing/source/wpa_supplicant/patches/wpa_supplicant-flush-debug-output.patch deleted file mode 100644 index a6868518..00000000 --- a/testing/source/wpa_supplicant/patches/wpa_supplicant-flush-debug-output.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- wpa_supplicant-0.6.3/src/utils/wpa_debug.c.flush-debug 2007-07-30 23:15:34.000000000 -0400 -+++ wpa_supplicant-0.6.3/src/utils/wpa_debug.c 2007-07-30 23:17:06.000000000 -0400 -@@ -157,6 +157,7 @@ void wpa_debug_print_timestamp(void) - if (out_file) { - fprintf(out_file, "%ld.%06u: ", (long) tv.sec, - (unsigned int) tv.usec); -+ fflush(out_file); - } else - #endif /* CONFIG_DEBUG_FILE */ - printf("%ld.%06u: ", (long) tv.sec, (unsigned int) tv.usec); -@@ -185,6 +186,7 @@ void wpa_printf(int level, char *fmt, .. - if (out_file) { - vfprintf(out_file, fmt, ap); - fprintf(out_file, "\n"); -+ fflush(out_file); - } else { - #endif /* CONFIG_DEBUG_FILE */ - vprintf(fmt, ap); -@@ -217,6 +219,7 @@ static void _wpa_hexdump(int level, cons - fprintf(out_file, " [REMOVED]"); - } - fprintf(out_file, "\n"); -+ fflush(out_file); - } else { - #endif /* CONFIG_DEBUG_FILE */ - printf("%s - hexdump(len=%lu):", title, (unsigned long) len); -@@ -262,12 +265,14 @@ static void _wpa_hexdump_ascii(int level - fprintf(out_file, - "%s - hexdump_ascii(len=%lu): [REMOVED]\n", - title, (unsigned long) len); -+ fflush(out_file); - return; - } - if (buf == NULL) { - fprintf(out_file, - "%s - hexdump_ascii(len=%lu): [NULL]\n", - title, (unsigned long) len); -+ fflush(out_file); - return; - } - fprintf(out_file, "%s - hexdump_ascii(len=%lu):\n", -@@ -292,6 +297,7 @@ static void _wpa_hexdump_ascii(int level - pos += llen; - len -= llen; - } -+ fflush(out_file); - } else { - #endif /* CONFIG_DEBUG_FILE */ - if (!show) { diff --git a/testing/source/wpa_supplicant/patches/wpa_supplicant-gui-qt4.patch b/testing/source/wpa_supplicant/patches/wpa_supplicant-gui-qt4.patch deleted file mode 100644 index c54cd9a2..00000000 --- a/testing/source/wpa_supplicant/patches/wpa_supplicant-gui-qt4.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 9404f356e394604d1d3d6dbffc52abd54260e4d4 Mon Sep 17 00:00:00 2001 -From: Lubomir Rintel <lkundrak@v3.sk> -Date: Tue, 27 Oct 2015 08:56:35 +0100 -Subject: [PATCH] wpa_supplicant: allow overriding the names of the Qt4 tools - -This is useful for distributions that ship different versions of Qt in -different locations. ---- - wpa_supplicant/Makefile | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile -index ad9ead9..b19676d 100644 ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -11,6 +11,9 @@ export INCDIR ?= /usr/local/include/ - export BINDIR ?= /usr/local/sbin/ - PKG_CONFIG ?= pkg-config - -+QMAKE ?= qmake -+LRELEASE ?= lrelease -+ - CFLAGS += $(EXTRA_CFLAGS) - CFLAGS += -I$(abspath ../src) - CFLAGS += -I$(abspath ../src/utils) -@@ -1787,10 +1790,10 @@ wpa_gui: - @echo "wpa_gui has been removed - see wpa_gui-qt4 for replacement" - - wpa_gui-qt4/Makefile: -- qmake -o wpa_gui-qt4/Makefile wpa_gui-qt4/wpa_gui.pro -+ $(QMAKE) -o wpa_gui-qt4/Makefile wpa_gui-qt4/wpa_gui.pro - - wpa_gui-qt4/lang/wpa_gui_de.qm: wpa_gui-qt4/lang/wpa_gui_de.ts -- lrelease wpa_gui-qt4/wpa_gui.pro -+ $(LRELEASE) wpa_gui-qt4/wpa_gui.pro - - wpa_gui-qt4: wpa_gui-qt4/Makefile wpa_gui-qt4/lang/wpa_gui_de.qm - $(MAKE) -C wpa_gui-qt4 --- -2.6.2 - diff --git a/testing/source/wpa_supplicant/patches/wpa_supplicant-quiet-scan-results-message.patch b/testing/source/wpa_supplicant/patches/wpa_supplicant-quiet-scan-results-message.patch deleted file mode 100644 index c646a304..00000000 --- a/testing/source/wpa_supplicant/patches/wpa_supplicant-quiet-scan-results-message.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 763a4ef660e2bd81f6cdc71a2f29a0a3e71b2ebc Mon Sep 17 00:00:00 2001 -From: Dan Williams <dcbw@redhat.com> -Date: Tue, 22 Nov 2016 15:48:17 +0100 -Subject: [PATCH 1/2] quiet an annoying and frequent syslog message - ---- - wpa_supplicant/events.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/wpa_supplicant/events.c b/wpa_supplicant/events.c -index abe3b47..72a0412 100644 ---- a/wpa_supplicant/events.c -+++ b/wpa_supplicant/events.c -@@ -1555,11 +1555,11 @@ static int _wpa_supplicant_event_scan_results(struct wpa_supplicant *wpa_s, - if (wpa_s->last_scan_req == MANUAL_SCAN_REQ && - wpa_s->manual_scan_use_id && wpa_s->own_scan_running && - own_request && !(data && data->scan_info.external_scan)) { -- wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_RESULTS "id=%u", -+ wpa_msg_ctrl(wpa_s, MSG_DEBUG, WPA_EVENT_SCAN_RESULTS "id=%u", - wpa_s->manual_scan_id); - wpa_s->manual_scan_use_id = 0; - } else { -- wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_RESULTS); -+ wpa_msg_ctrl(wpa_s, MSG_DEBUG, WPA_EVENT_SCAN_RESULTS); - } - wpas_notify_scan_results(wpa_s); - --- -2.9.3 - diff --git a/testing/source/wpa_supplicant/slack-desc b/testing/source/wpa_supplicant/slack-desc deleted file mode 100644 index a6b63978..00000000 --- a/testing/source/wpa_supplicant/slack-desc +++ /dev/null @@ -1,18 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - |-----handy-ruler------------------------------------------------------| -wpa_supplicant: wpa_supplicant (WPA/WPA2/IEEE 802.1X Supplicant) -wpa_supplicant: -wpa_supplicant: wpa_supplicant is a WPA Supplicant for Linux with support for WPA and -wpa_supplicant: WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA -wpa_supplicant: component that is used in the client stations. It implements key -wpa_supplicant: negotiation with a WPA Authenticator and it controls the roaming and -wpa_supplicant: IEEE 802.11 authentication/association of the wlan driver. -wpa_supplicant: -wpa_supplicant: Homepage: http://hostap.epitest.fi/wpa_supplicant/ -wpa_supplicant: -wpa_supplicant: diff --git a/testing/source/wpa_supplicant/wpa_supplicant.SlackBuild b/testing/source/wpa_supplicant/wpa_supplicant.SlackBuild deleted file mode 100755 index 492ddb72..00000000 --- a/testing/source/wpa_supplicant/wpa_supplicant.SlackBuild +++ /dev/null @@ -1,180 +0,0 @@ -#!/bin/bash - -# Copyright 2004-2008 Eric Hameleers, Eindhoven, NL -# Copyright 2008-2018 Patrick J. Volkerding, Sebeka, MN, USA -# Permission to use, copy, modify, and distribute this software for -# any purpose with or without fee is hereby granted, provided that -# the above copyright notice and this permission notice appear in all -# copies. -# -# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT -# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# ----------------------------------------------------------------------------- - -cd $(dirname $0) ; CWD=$(pwd) - -PKGNAM=wpa_supplicant -VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} -BUILD=${BUILD:-3} - -SRCVERSION=$(printf $VERSION | tr _ -) - -# Automatically determine the architecture we're building on: -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) export ARCH=i586 ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$( uname -m ) ;; - esac -fi - -# If the variable PRINT_PACKAGE_NAME is set, then this script will report what -# the name of the created package would be, and then exit. This information -# could be useful to other scripts. -if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then - echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" - exit 0 -fi - -NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} - -if [ "$ARCH" = "i586" ]; then - SLKCFLAGS="-O2 -march=i586 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "arm" ]; then - SLKCFLAGS="-O2 -march=armv4 -mtune=xscale" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "armel" ]; then - SLKCFLAGS="-O2 -march=armv4t" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP -rm -rf ${PKGNAM}-${SRCVERSION} -tar xvf $CWD/${PKGNAM}-${SRCVERSION}.tar.?z* || exit 1 -cd ${PKGNAM}-${SRCVERSION} -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -zcat $CWD/patches/wpa_supplicant-assoc-timeout.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/wpa_supplicant-dbus-service-file-args.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/wpa_supplicant-flush-debug-output.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/wpa_supplicant-gui-qt4.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/wpa_supplicant-quiet-scan-results-message.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patches/wpa_supplicant-2.7-fix-undefined-remove-ie.patch.gz | patch -p1 --verbose || exit 1 - -# Allow legacy tls to avoid breaking WPA2-Enterprise: -zcat $CWD/patches/allow-tlsv1.patch.gz | patch -p1 --verbose || exit 1 - -cd wpa_supplicant - -# Create the configuration file for building wpa_supplicant: -cat $CWD/config/dot.config > .config - -# Build the usual binaries -CFLAGS="$SLKCFLAGS" \ -make $NUMJOBS \ - BINDIR=/usr/sbin \ - LIBDIR=/usr/lib${LIBDIRSUFFIX} || exit 1 - -# Build the Qt4 GUI client -CFLAGS="$SLKCFLAGS" \ -make $NUMJOBS \ - wpa_gui-qt4 \ - BINDIR=/usr/sbin \ - LIBDIR=/usr/lib${LIBDIRSUFFIX} || exit 1 - -# Make sure man pages are built -make -C doc/docbook man - -# This goes into the doc directory later on: -mv wpa_supplicant.conf wpa_supplicant.conf.sample - -# Install binaries: -mkdir -p $PKG/usr/sbin $PKG/usr/bin -cp wpa_supplicant wpa_passphrase wpa_cli $PKG/usr/sbin/ -cp wpa_gui-qt4/wpa_gui $PKG/usr/bin/ - -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# Install dbus configuration file: -mkdir -p $PKG/etc/dbus-1/system.d/ -cp dbus/dbus-wpa_supplicant.conf \ - $PKG/etc/dbus-1/system.d/dbus-wpa_supplicant.conf - -mkdir -p $PKG/usr/share/dbus-1/system-services -install -m644 dbus/*.service $PKG/usr/share/dbus-1/system-services/ - -# Install a .desktop file and icon for wpa_gui: -# (converted from the wpa_gui.svg in the source) -mkdir -p $PKG/usr/share/{applications,pixmaps} -cat $CWD/config/wpa_gui.desktop > $PKG/usr/share/applications/wpa_gui.desktop -cat $CWD/config/wpa_gui.png > $PKG/usr/share/pixmaps/wpa_gui.png - -# Install a logrotate config -mkdir -p $PKG/etc/logrotate.d -cat $CWD/config/wpa_supplicant.logrotate > $PKG/etc/logrotate.d/wpa_supplicant.new - -# Install man pages: -for m in 5 8; do - mkdir -p $PKG/usr/man/man${m} - cp doc/docbook/*.${m} $PKG/usr/man/man${m}/ -done -find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; - -# Install a default configuration file (only readable by root): -mkdir -p $PKG/etc -cat $CWD/config/wpa_supplicant.conf > $PKG/etc/wpa_supplicant.conf.new -chmod 600 $PKG/etc/wpa_supplicant.conf.new - -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a \ - ChangeLog ../COPYING README README-{P2P,WPS} examples *.txt *.sample $CWD/README.slackware \ - $PKG/usr/doc/$PKGNAM-$VERSION -chown -R root:root $PKG/usr/doc/$PKGNAM-$VERSION/* -chmod -R a-w $PKG/usr/doc/$PKGNAM-$VERSION/* - -# If there's a ChangeLog, installing at least part of the recent history -# is useful, but don't let it get totally out of control: -if [ -r ChangeLog ]; then - DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) - cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog - touch -r ChangeLog $DOCSDIR/ChangeLog -fi - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -zcat $CWD/doinst.sh.gz >> $PKG/install/doinst.sh - -cd $PKG -/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz |
