path: root/source/a/cups/usb-backend-both-usblp-and-libusb.dpatch

#! /bin/sh /usr/share/dpatch/dpatch-run
## usb-backend-both-usblp-and-libusb.dpatch by  <till.kamppeter@gmail.com>
##
## DP: http://www.cups.org/str.php?L3357

@DPATCH@
diff -urNad cups-1.4.3~/backend/Makefile cups-1.4.3/backend/Makefile
--- cups-1.4.3~/backend/Makefile	2010-04-09 15:56:03.735720821 +0200
+++ cups-1.4.3/backend/Makefile	2010-04-09 15:56:04.335705387 +0200
@@ -267,7 +267,7 @@
 	echo Linking $@...
 	$(CC) $(LDFLAGS) -o usb usb.o libbackend.a $(LIBUSB) \
 		$(BACKLIBS) $(LIBS)
-usb.o:	usb.c usb-darwin.c usb-libusb.c usb-unix.c
+usb.o:	usb.c usb-darwin.c usb-hybrid.c usb-libusb.c usb-unix.c
 
 
 #
diff -urNad cups-1.4.3~/backend/ieee1284.c cups-1.4.3/backend/ieee1284.c
--- cups-1.4.3~/backend/ieee1284.c	2009-12-08 03:13:42.000000000 +0100
+++ cups-1.4.3/backend/ieee1284.c	2010-04-09 15:56:04.335705387 +0200
@@ -255,6 +255,7 @@
     cups_option_t	*values;	/* Keys and values in device ID */
     const char		*mfg,		/* Manufacturer */
 			*mdl,		/* Model */
+			*des,		/* Description */
 			*sern;		/* Serial number */
     char		temp[256],	/* Temporary manufacturer string */
 			*tempptr;	/* Pointer into temp string */
@@ -285,10 +286,20 @@
     }
     else
     {
-      strlcpy(temp, make_model, sizeof(temp));
+      /*
+       * No manufacturer?  Use the model string or description...
+       */
+
+      if (mdl)
+	_ppdNormalizeMakeAndModel(mdl, temp, sizeof(temp));
+      else if ((des = cupsGetOption("DESCRIPTION", num_values, values)) != NULL ||
+	       (des = cupsGetOption("DES", num_values, values)) != NULL)
+	_ppdNormalizeMakeAndModel(des, temp, sizeof(temp));
+      else
+	strlcpy(temp, "Unknown", sizeof(temp));
 
       if ((tempptr = strchr(temp, ' ')) != NULL)
-        *tempptr = '\0';
+	*tempptr = '\0';
 
       mfg = temp;
     }
diff -urNad cups-1.4.3~/backend/usb-hybrid.c cups-1.4.3/backend/usb-hybrid.c
--- cups-1.4.3~/backend/usb-hybrid.c	1970-01-01 01:00:00.000000000 +0100
+++ cups-1.4.3/backend/usb-hybrid.c	2010-04-09 15:56:04.345707078 +0200
@@ -0,0 +1,87 @@
+/*
+ * "$Id: usb-hybrid.c 8807 2009-08-31 18:45:43Z mike $"
+ *
+ *   USB port backend for the Common UNIX Printing System (CUPS).
+ *
+ *   This file is included from "usb.c" when compiled on Linux.
+ *
+ *   Copyright 2007-2008 by Apple Inc.
+ *   Copyright 1997-2007 by Easy Software Products, all rights reserved.
+ *
+ *   These coded instructions, statements, and computer programs are the
+ *   property of Apple Inc. and are protected by Federal copyright
+ *   law.  Distribution and use rights are outlined in the file "LICENSE.txt"
+ *   "LICENSE" which should have been included with this file.  If this
+ *   file is missing or damaged, see the license at "http://www.cups.org/".
+ *
+ *   This file is subject to the Apple OS-Developed Software exception.
+ *
+ * Contents:
+ *
+ *   print_device() - Print a file to a USB device.
+ *   list_devices() - List all USB devices.
+ */
+
+/*
+ * Include necessary headers.
+ */
+
+#include <sys/select.h>
+
+/*
+ * Include the two USB implementations used under Linux ...
+ */
+
+#include "usb-libusb.c"
+#include "usb-unix.c"
+
+/*
+ * 'print_device()' - Print a file to a USB device.
+ */
+
+int					/* O - Exit status */
+print_device(const char *uri,		/* I - Device URI */
+             const char *hostname,	/* I - Hostname/manufacturer */
+             const char *resource,	/* I - Resource/modelname */
+	     char       *options,	/* I - Device options/serial number */
+	     int        print_fd,	/* I - File descriptor to print */
+	     int        copies,		/* I - Copies to print */
+	     int	argc,		/* I - Number of command-line arguments (6 or 7) */
+	     char	*argv[])	/* I - Command-line arguments */
+{
+  int result;
+  for(;;)
+  {
+    result = print_device_unix(uri, hostname, resource, options, print_fd,
+			       copies, argc, argv);
+    if (result == -1)
+    {
+      result = print_device_libusb(uri, hostname, resource, options, print_fd,
+				   copies, argc, argv);
+      if (result == -1)
+	sleep(5);
+      else
+	return(result);
+    }
+    else
+      return(result);
+  }
+}
+
+/*
+ * 'list_devices()' - List all USB devices.
+ */
+
+void
+list_devices(void)
+{
+  /* Try both discovery methods, each device will appear only under one
+     of them */
+  list_devices_libusb();
+  list_devices_unix();
+}
+
+
+/*
+ * End of "$Id: usb-hybrid.c 8807 2009-08-31 18:45:43Z mike $".
+ */
diff -urNad cups-1.4.3~/backend/usb-libusb.c cups-1.4.3/backend/usb-libusb.c
--- cups-1.4.3~/backend/usb-libusb.c	2009-09-11 22:03:31.000000000 +0200
+++ cups-1.4.3/backend/usb-libusb.c	2010-04-09 15:56:04.345707078 +0200
@@ -13,16 +13,16 @@
  *
  * Contents:
  *
- *   list_devices()    - List the available printers.
- *   print_device()    - Print a file to a USB device.
+ *   list_devices_libusb()    - List the available printers.
+ *   print_device_libusb()    - Print a file to a USB device.
  *   close_device()    - Close the connection to the USB printer.
  *   find_device()     - Find or enumerate USB printers.
  *   get_device_id()   - Get the IEEE-1284 device ID for the printer.
  *   list_cb()         - List USB printers for discovery.
  *   make_device_uri() - Create a device URI for a USB printer.
- *   open_device()     - Open a connection to the USB printer.
+ *   open_device_libusb()     - Open a connection to the USB printer.
  *   print_cb()        - Find a USB printer for printing.
- *   side_cb()         - Handle side-channel requests.
+ *   side_cb_libusb()         - Handle side-channel requests.
  */
 
 /*
@@ -65,30 +65,30 @@
 static char		*make_device_uri(usb_printer_t *printer,
 			                 const char *device_id,
 					 char *uri, size_t uri_size);
-static int		open_device(usb_printer_t *printer, int verbose);
+static int		open_device_libusb(usb_printer_t *printer, int verbose);
 static int		print_cb(usb_printer_t *printer, const char *device_uri,
 			         const char *device_id, const void *data);
-static ssize_t		side_cb(usb_printer_t *printer, int print_fd);
+static ssize_t		side_cb_libusb(usb_printer_t *printer, int print_fd);
 
 
 /*
- * 'list_devices()' - List the available printers.
+ * 'list_devices_libusb()' - List the available printers.
  */
 
 void
-list_devices(void)
+list_devices_libusb(void)
 {
-  fputs("DEBUG: list_devices\n", stderr);
+  fputs("DEBUG: list_devices_libusb\n", stderr);
   find_device(list_cb, NULL);
 }
 
 
 /*
- * 'print_device()' - Print a file to a USB device.
+ * 'print_device_libusb()' - Print a file to a USB device.
  */
 
 int					/* O - Exit status */
-print_device(const char *uri,		/* I - Device URI */
+print_device_libusb(const char *uri,		/* I - Device URI */
              const char *hostname,	/* I - Hostname/manufacturer */
              const char *resource,	/* I - Resource/modelname */
 	     char       *options,	/* I - Device options/serial number */
@@ -105,19 +105,23 @@
   struct pollfd	pfds[2];		/* Poll descriptors */
 
 
-  fputs("DEBUG: print_device\n", stderr);
+  fputs("DEBUG: print_device_libusb\n", stderr);
 
  /*
   * Connect to the printer...
   */
 
+#if defined(__linux) || defined(__sun) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) || defined(__FreeBSD_kernel__)
+  if ((printer = find_device(print_cb, uri)) == NULL)
+    return(-1);
+#else
   while ((printer = find_device(print_cb, uri)) == NULL)
   {
     _cupsLangPuts(stderr,
 		  _("INFO: Waiting for printer to become available...\n"));
     sleep(5);
   }
-
+#endif
 
  /*
   * If we are printing data from a print driver on stdin, ignore SIGTERM
@@ -189,7 +193,7 @@
 
       if (pfds[1].revents & (POLLIN | POLLHUP))
       {
-        if ((bytes = side_cb(printer, print_fd)) < 0)
+        if ((bytes = side_cb_libusb(printer, print_fd)) < 0)
 	  pfds[1].events = 0;		/* Filter has gone away... */
 	else
           tbytes += bytes;
@@ -359,7 +363,7 @@
 	    printer.iface  = iface;
 	    printer.handle = NULL;
 
-            if (!open_device(&printer, data != NULL))
+            if (!open_device_libusb(&printer, data != NULL))
 	    {
 	      if (!get_device_id(&printer, device_id, sizeof(device_id)))
 	      {
@@ -583,6 +587,14 @@
     mfg = tempmfg;
   }
 
+  if (!strncasecmp(mdl, mfg, strlen(mfg)))
+  {
+    mdl += strlen(mfg);
+
+    while (isspace(*mdl & 255))
+      mdl ++;
+    }
+
  /*
   * Generate the device URI from the manufacturer, model, serial number,
   * and interface number...
@@ -611,11 +623,11 @@
 
 
 /*
- * 'open_device()' - Open a connection to the USB printer.
+ * 'open_device_libusb()' - Open a connection to the USB printer.
  */
 
 static int				/* O - 0 on success, -1 on error */
-open_device(usb_printer_t *printer,	/* I - Printer */
+open_device_libusb(usb_printer_t *printer,	/* I - Printer */
             int           verbose)	/* I - Update connecting-to-device state? */
 {
   int	number;				/* Configuration/interface/altset numbers */
@@ -733,16 +745,73 @@
          const char    *device_id,	/* I - IEEE-1284 device ID */
          const void    *data)		/* I - User data (make, model, S/N) */
 {
-  return (!strcmp((char *)data, device_uri));
+  char *uri = (char *)data,
+       *str1,
+       *str2,
+       buf[255],
+       requested_uri[1024];
+
+  /* Work on a copy of uri */
+  strncpy(requested_uri, uri, sizeof(requested_uri));
+  requested_uri[sizeof(requested_uri) - 1] = '\0';
+
+  /*
+   * libusb-discovered URIs can have an "interface" specification and this
+   * never happens for usblp-discovered URIs, so remove the "interface"
+   * specification from the URI which we are checking currently. This way a
+   * queue for a usblp-discovered printer can now be accessed via libusb
+   */
+  if (((str1 = strstr(requested_uri, "interface=")) == NULL) &&
+      ((str2 = strstr(device_uri, "interface=")) != NULL))
+  {
+    *(str2 - 1) = '\0';
+  }
+
+  /*
+   * Old URI with "serial=?". Cut this part off and consider this as
+   * an URI without serial number
+   */
+  if ((str1 = strstr(requested_uri, "serial=?")) != NULL)
+   *(str1 - 1) = '\0';
+
+  /*
+   * Old URI without serial number. Match it also with URIs with serial
+   * number
+   */
+  if (((str1 = strstr(requested_uri, "serial=")) == NULL) &&
+      ((str2 = strstr(device_uri, "serial=")) != NULL))
+    *(str2 - 1) = '\0';
+
+  /*
+   * libusb-discovered URIs can have a "serial" specification when the
+   * usblp-discovered URI for the same printer does not have one, as
+   * with libusb we can discover serial numbers also with other methods
+   * than only via the device ID. Therefore we accept also a
+   * usblp-discovered printer without serial number as a match. This we
+   * do by removing the serial number from the queue's (libusb-discovered)
+   * URI before comparing. Also warn the user because of the incapability
+   * of the usblp-based access to distinguish printers by the serial
+   * number.
+   */
+  if (((str1 = strstr(requested_uri, "serial=")) == NULL) &&
+      ((str2 = strstr(device_uri, "serial=")) != NULL))
+  {
+    *(str2 - 1) = '\0';
+    if (backendGetMakeModel(device_id, buf, sizeof(buf)) == 0)
+      fprintf(stderr, "WARNING: If you have more than one %s printer connected to this machine, please make sure that the \"usblp\" kernel module is always unloaded (and blacklisted) and re-create the queues for these printers. Otherwise CUPS will not be able to distinguish them.\n",
+	    buf);
+  }
+
+  return (!strcmp(requested_uri, device_uri));
 }
 
 
 /*
- * 'side_cb()' - Handle side-channel requests.
+ * 'side_cb_libusb()' - Handle side-channel requests.
  */
 
 static ssize_t				/* O - Number of bytes written */
-side_cb(usb_printer_t *printer,		/* I - Printer */
+side_cb_libusb(usb_printer_t *printer,		/* I - Printer */
         int           print_fd)		/* I - File to print */
 {
   ssize_t		bytes,		/* Bytes read/written */
diff -urNad cups-1.4.3~/backend/usb-unix.c cups-1.4.3/backend/usb-unix.c
--- cups-1.4.3~/backend/usb-unix.c	2009-12-08 03:13:42.000000000 +0100
+++ cups-1.4.3/backend/usb-unix.c	2010-04-09 15:56:30.799666933 +0200
@@ -18,10 +18,10 @@
  *
  * Contents:
  *
- *   print_device() - Print a file to a USB device.
- *   list_devices() - List all USB devices.
- *   open_device()  - Open a USB device...
- *   side_cb()      - Handle side-channel requests...
+ *   print_device_unix() - Print a file to a USB device.
+ *   list_devices_unix() - List all USB devices.
+ *   open_device_unix()  - Open a USB device...
+ *   side_cb_unix()      - Handle side-channel requests...
  */
 
 /*
@@ -35,17 +35,17 @@
  * Local functions...
  */
 
-static int	open_device(const char *uri, int *use_bc);
-static int	side_cb(int print_fd, int device_fd, int snmp_fd,
+static int	open_device_unix(const char *uri, int *use_bc);
+static int	side_cb_unix(int print_fd, int device_fd, int snmp_fd,
 		        http_addr_t *addr, int use_bc);
 
 
 /*
- * 'print_device()' - Print a file to a USB device.
+ * 'print_device_unix()' - Print a file to a USB device.
  */
 
 int					/* O - Exit status */
-print_device(const char *uri,		/* I - Device URI */
+print_device_unix(const char *uri,		/* I - Device URI */
              const char *hostname,	/* I - Hostname/manufacturer */
              const char *resource,	/* I - Resource/modelname */
 	     char       *options,	/* I - Device options/serial number */
@@ -102,7 +102,7 @@
              strncasecmp(hostname, "Minolta", 7);
 #endif /* __FreeBSD__ || __NetBSD__ || __OpenBSD__ || __DragonFly__ */
 
-    if ((device_fd = open_device(uri, &use_bc)) == -1)
+    if ((device_fd = open_device_unix(uri, &use_bc)) == -1)
     {
       if (getenv("CLASS") != NULL)
       {
@@ -132,6 +132,10 @@
 	              _("INFO: Printer busy; will retry in 10 seconds...\n"));
 	sleep(10);
       }
+#ifdef HAVE_USB_H
+      else
+	return (-1);
+#else
       else if (errno == ENXIO || errno == EIO || errno == ENOENT ||
                errno == ENODEV)
       {
@@ -147,6 +151,7 @@
 			resource, strerror(errno));
 	return (CUPS_BACKEND_FAILED);
       }
+#endif
     }
   }
   while (device_fd < 0);
@@ -190,7 +195,7 @@
     tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, NULL);
 
 #else
-    tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, side_cb);
+    tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, side_cb_unix);
 #endif /* __sun */
 
     if (print_fd != 0 && tbytes >= 0)
@@ -214,11 +219,11 @@
 
 
 /*
- * 'list_devices()' - List all USB devices.
+ * 'list_devices_unix()' - List all USB devices.
  */
 
 void
-list_devices(void)
+list_devices_unix(void)
 {
 #ifdef __linux
   int	i;				/* Looping var */
@@ -320,11 +325,11 @@
 
 
 /*
- * 'open_device()' - Open a USB device...
+ * 'open_device_unix()' - Open a USB device...
  */
 
 static int				/* O - File descriptor or -1 on error */
-open_device(const char *uri,		/* I - Device URI */
+open_device_unix(const char *uri,		/* I - Device URI */
             int        *use_bc)		/* O - Set to 0 for unidirectional */
 {
   int	fd;				/* File descriptor */
@@ -357,9 +362,12 @@
     char	device[255],		/* Device filename */
 		device_id[1024],	/* Device ID string */
 		make_model[1024],	/* Make and model */
-		device_uri[1024];	/* Device URI string */
-
+		device_uri[1024],	/* Device URI string */
+		requested_uri[1024],	/* Device URI string */
+		*str1,
+		*str2;
 
+    
    /*
     * Find the correct USB device...
     */
@@ -407,7 +415,55 @@
 	  device_uri[0] = '\0';
         }
 
-        if (!strcmp(uri, device_uri))
+	/* Work on a copy of uri */
+	strncpy(requested_uri, uri, sizeof(requested_uri));
+	requested_uri[sizeof(requested_uri) - 1] = '\0';
+
+	/*
+	 * libusb-discovered URIs can have an "interface" specification and this
+	 * never happens for usblp-discovered URIs, so remove the "interface"
+	 * specification from the URI of the print queue. This way a queue for
+	 * a libusb-discovered printer can now be accessed via the usblip kernel
+	 * module
+	 */
+	if ((str1 = strstr(requested_uri, "interface=")) != NULL)
+	  *(str1 - 1) = '\0';
+
+	/*
+	 * Old URI with "serial=?". Cut this part off and consider this as
+	 * an URI without serial number
+	 */
+	if ((str1 = strstr(requested_uri, "serial=?")) != NULL)
+	 *(str1 - 1) = '\0';
+
+	/*
+	 * Old URI without serial number. Match it also with URIs with serial
+	 * number
+	 */
+	if (((str1 = strstr(requested_uri, "serial=")) == NULL) &&
+	    ((str2 = strstr(device_uri, "serial=")) != NULL))
+	    *(str2 - 1) = '\0';
+
+	/*
+	 * libusb-discovered URIs can have a "serial" specification when the
+	 * usblp-discovered URI for the same printer does not have one, as
+	 * with libusb we can discover serial numbers also with other methods
+	 * than only via the device ID. Therefore we accept also a
+	 * usblp-discovered printer without serial number as a match. This we
+	 * do by removing the serial number from the queue's (libusb-discovered)
+	 * URI before comparing. Also warn the user because of the incapability
+	 * of the usblp-based access to distinguish printers by the serial
+	 * number.
+	 */
+	if (((str1 = strstr(requested_uri, "serial=")) != NULL) &&
+	    ((str2 = strstr(device_uri, "serial=")) == NULL))
+	{
+	  *(str1 - 1) = '\0';
+	  fprintf(stderr, "WARNING: If you have more than one %s printer connected to this machine, please unload (and blacklist) the \"usblp\" kernel module as otherwise CUPS will not be able to distinguish your printers.\n",
+		  make_model);
+	}
+
+        if (!strcmp(requested_uri, device_uri))
 	{
 	 /*
 	  * Yes, return this file descriptor...
@@ -433,10 +489,14 @@
       */
 
       if (busy)
+      {
 	_cupsLangPuts(stderr,
 	              _("INFO: Printer busy; will retry in 5 seconds...\n"));
 
-      sleep(5);
+	sleep(5);
+      }
+      else
+	return -1;
     }
   }
 #elif defined(__sun) && defined(ECPPIOC_GETDEVID)
@@ -557,11 +617,11 @@
 
 
 /*
- * 'side_cb()' - Handle side-channel requests...
+ * 'side_cb_unix()' - Handle side-channel requests...
  */
 
 static int				/* O - 0 on success, -1 on error */
-side_cb(int         print_fd,		/* I - Print file */
+side_cb_unix(int         print_fd,		/* I - Print file */
         int         device_fd,		/* I - Device file */
         int         snmp_fd,		/* I - SNMP socket (unused) */
 	http_addr_t *addr,		/* I - Device address (unused) */
diff -urNad cups-1.4.3~/backend/usb.c cups-1.4.3/backend/usb.c
--- cups-1.4.3~/backend/usb.c	2008-06-24 03:28:36.000000000 +0200
+++ cups-1.4.3/backend/usb.c	2010-04-09 15:56:04.345707078 +0200
@@ -56,7 +56,7 @@
  */
 
 #ifdef HAVE_USB_H
-#  include "usb-libusb.c"
+#  include "usb-hybrid.c"
 #elif defined(__APPLE__)
 #  include "usb-darwin.c"
 #elif defined(__linux) || defined(__sun) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) || defined(__FreeBSD_kernel__)