path: root/source/a/devs/makedev_2.3.1-46.2.diff

--- makedev-2.3.1.orig/MAKEDEV.man
+++ makedev-2.3.1/MAKEDEV.man
@@ -124,8 +124,7 @@
 .BI ttyC x
 and the corresponding dial-out device is
 .BI cub x 
-By default devices for 7 lines are created, but this can be changed to
-15 by removing the comment.
+Devices for 32 lines are created.
 .TP
 .B Pseudo Terminals
 .TP
@@ -387,4 +386,4 @@
 Linux Allocated Devices, maintained by H.\ Peter Anvin,
 <Peter.Anvin@linux.org>.
 .SH AUTHOR
-Nick Holloway, <Nick.Hollowa
\ No newline at end of file
+Nick Holloway, <Nick.Hollowa
--- makedev-2.3.1.orig/MAKEDEV
+++ makedev-2.3.1/MAKEDEV
@@ -10,25 +10,38 @@
 # system, and you may change the permissions to suit your preference.  These
 # lines _must_ be of the format "user group perm".
 
- public="  root sys    666"
- system="  root sys    660"
-   kmem="  root kmem   660"
-    tty="  root tty    666"
-   cons="  root tty    622"	# 622 for console?
-    vcs="  root sys    600"
-dialout="  root uucp   660"
-  mouse="  root sys    666"
-printer="  root daemon 660"
- floppy="  root floppy 660"
-   disk="  root disk   660"
-   scsi="  root sys    600"
-  cdrom="  root disk   660"
-   tape="  root disk   660"
-  audio="  root sys    666"
-  ibcs2="  root sys    666"
-scanner="  root sys    666"
+ public="  root root   0666"
+private="  root root   0600"
+ system="  root root   0660"
+   kmem="  root kmem   0640"
+    tty="  root tty    0666"
+   cons="  root tty    0622"
+    vcs="  root root   0600"
+dialout="  root dialout 0660"
+  mouse="  root root   0660"
+printer="  root lp     0660"
+ floppy="  root floppy 0660"
+   disk="  root disk   0660"
+   scsi="  root root   0600"
+  cdrom="  root cdrom  0660"
+   tape="  root tape   0660"
+  audio="  root audio  0660"
+  video="  root video  0660"
+  ibcs2="  root root   0666"
+scanner="  root root   0666"
+   coda="  root root   0600"
+  ipsec="  root root   0200"
+readable="  root root   0444"
 
-MAXVT=8
+MAXVT=63
+
+# defaults for $major_*
+major_ide0=3
+major_ide1=22
+major_sd=8
+major_lp=6
+
+# Remark: OSS/Linux becomes major_OSSLinux
 
 #---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#
 
@@ -94,41 +107,30 @@
 
 #---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#
 
-# For bash and ksh, we can use faster builtin routines to do manipulation,
-# otherwise (ash) fall back to slower method using `expr'.
-# The extra level of indirection using `eval' is necessary a) for ksh, and
-# b) to get past ash.
+# Debian allows us to assume /bin/sh is a POSIX compliant shell, so go for it!
 
-if [ "$RANDOM" != "$RANDOM" ]
-then
-	math () {
-		eval echo "\$(($*))"
-	}
-	index () {	# index string c
-		eval "I=\${1%$2*}"
-		eval echo "\${#I}"
-	}
-	suffix () {
-	    eval echo "\${1#$2}"
-	}
-	strip () {
-		eval echo "\${1% $2 *} \${1#* $2 }"
-	}
-else
-	math () {
-		expr "$@"
-	}
-	index () {	# index string c
-		expr $1 : ".*$2" - 1
-	}
-	suffix () {
-		expr "$1" : "$2\(.*\)"
-	}
-	strip () {
-		echo "[$1][$2]" >&2
-		echo "`expr \"$1\" : \"\(.*\) $2 \"` `expr \"$1\" : \".* $2 \(.*\)\"`"
-	}
-fi
+math () {
+	eval echo "\$(($*))"
+}
+index () {	# index string c
+	eval "I=\${1%$2*}"
+	eval echo "\${#I}"
+}
+suffix () {
+	eval echo "\${1#$2}"
+}
+strip () {
+	eval echo "\${1% $2 *} \${1#* $2 }"
+}
+first () {
+	eval echo "\${1:0:1}"
+}
+second () {
+	eval echo "\${1:1:1}"
+}
+substr () {
+	echo $1 | cut -c $2
+}
 
 #---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#
 
@@ -140,6 +142,7 @@
 	exec 3<$procfs/devices
 	while read major device <&3
 	do
+		device=`echo $device|tr -d /`
 		case "$major" in
 			Character|Block|'')
 				;;
@@ -166,7 +169,7 @@
 	while [ $# -ne 0 ]
 	do
 		case "$1" in
-			mem|tty|ttyp|cua|cub)	;;
+			mem|tty|ttyp|cua|cub|cui)	;;
 			hd)	(for d in a b c d e f g h ; do
 					echo -n hd$d " "
 				 done) ; echo
@@ -175,13 +178,16 @@
 			ide1)	echo hdc hdd ;;
 			ide2)	echo hde hdf ;;
 			ide3)	echo hdg hdh ;;
-			sd)	echo sda sdb ;;
-			sr)	echo scd0 ;;
+			sd)	echo sda sdb sdc sdd ;;
+			sg)	echo sg ;;
+			sr)	echo scd ;;
 			st)	echo st0 ;;
 			xd)	echo xda xdb ;;
+			ad)	echo ada adb ;;
 			fd)	echo fd0 fd1 ;;
 			lp)	echo lp ;;
 			mt)	echo ftape ;;
+			qft)	echo ftape ;;
 			loop)	echo loop ;;
 			md)	echo md ;;
 			ibcs2)	echo ibcs2 ;;
@@ -191,13 +197,31 @@
 			ac4096)		echo ac4096 ;;
 			hw)	echo helloworld ;;
 			sbpcd | sbpcd[123])	echo $1 ;;
-			Joystick)	echo js ;;
+			joystick)	echo js ;;
 			apm_bios)	echo apm ;;
 			dcf)		echo dcf ;;
 			aztcd)		echo aztcd ;;
+			cm206cd)	echo cm206cd ;;
+			gscd)		echo gscd ;;
 			pcmcia)	;; # taken care of by its own driver
 			ttyC)	echo cyclades ;;
+			isdn)	echo isdnmodem isdnbri dcbri ;;
 			vcs)	;;
+			pty)	echo pty ;;
+			misc)	echo misc ;;
+			3dfx)	echo 3dfx ;;
+			agpgart)	echo agpgart ;;
+			ipmi|ipmikcs)	echo ipmi ;;
+			fb)	echo fb ;;
+			nb)	echo nb0 nb1 ;;
+			netlink)	echo netlink ;;
+			hamradio)	echo hamradio ;;
+			snd)	;;
+			ptm)	;;
+			pts)	;;
+			ttyS)	echo ttyS0 ttyS1 ttyS2 ttyS3 ;;
+			ttyI)	echo ttyI0 ttyI1 ttyI2 ttyI3 ;;
+			ircomm|irlpt)	irda ;;
 			*)	echo "$0: don't know what \"$1\" is" >&2 ;;
 		esac
 		shift
@@ -206,20 +230,148 @@
 
 for arg
 do
+#	case `cvt $arg` in
 	case $arg in
 	generic)
+		# pick the right generic-<arch> using dpkg's knowledge
+		case `dpkg --print-installation-architecture` in
+			alpha)
+				$0 $opts generic-alpha
+				;;
+			arm)
+				$0 $opts generic-arm
+				;;
+			i386)
+				$0 $opts generic-i386
+				;;
+			m68k)
+				$0 $opts generic-m68k
+				;;
+			powerpc)
+				$0 $opts generic-powerpc
+				;;
+			sparc)
+				$0 $opts generic-sparc
+				;;
+			*)
+				echo "$0: no support for generic-$arg" >&2
+				exit 1
+				;;
+		esac
+		;;
+	generic-alpha)
 		$0 $opts std
 		$0 $opts fd
 		$0 $opts fd0 fd1
-		$0 $opts hda hdb
+		$0 $opts hda hdb hdc hdd
+		$0 $opts xda xdb
+		$0 $opts sda sdb sdc sdd
+		$0 $opts scd0 scd1
+		$0 $opts st0 st1
+		$0 $opts sg
+		$0 $opts pty
+		$0 $opts console
+		$0 $opts ttyS0 ttyS1 ttyS2 ttyS3
+		$0 $opts busmice
+		$0 $opts lp
+		$0 $opts par
+		$0 $opts audio
+		$0 $opts fb
+		;;
+	generic-arm)
+		$0 $opts std
+		$0 $opts fd
+		$0 $opts fd0 fd1
+		$0 $opts hda hdb hdc hdd
+		$0 $opts xda xdb
+		$0 $opts sda sdb sdc sdd
+		$0 $opts scd0 scd1
+		$0 $opts st0 st1
+		$0 $opts sg
+		$0 $opts pty
+		$0 $opts console
+		$0 $opts ttyS0 ttyS1 ttyS2 ttyS3
+		$0 $opts busmice
+		$0 $opts lp
+		$0 $opts par
+		$0 $opts audio
+		$0 $opts fb
+		;;
+	generic-i386)
+		$0 $opts std
+		$0 $opts fd
+		$0 $opts fd0 fd1
+		$0 $opts hda hdb hdc hdd
 		$0 $opts xda xdb
-		$0 $opts sda sdb
+		$0 $opts sda sdb sdc sdd
+		$0 $opts scd0 scd1
+		$0 $opts st0 st1
+		$0 $opts sg
 		$0 $opts pty
 		$0 $opts console
 		$0 $opts ttyS0 ttyS1 ttyS2 ttyS3
 		$0 $opts busmice
 		$0 $opts lp
 		$0 $opts par
+		$0 $opts audio
+		$0 $opts fb
+		;;
+	generic-m68k)
+		$0 $opts std
+		$0 $opts fd
+		$0 $opts fd0-bare fd1-bare
+		$0 $opts hda hdb
+		$0 $opts sda sdb sdc sdd
+		$0 $opts sg
+		$0 $opts ada adb
+		$0 $opts pty
+		$0 $opts console
+		$0 $opts ttyS0 ttyS1 ttyS2 ttyS3 ttyS5
+		$0 $opts m68k-mice
+		$0 $opts lp
+		$0 $opts par
+		$0 $opts nvram
+		$0 $opts audio
+		$0 $opts fb
+		;;
+	generic-powerpc)
+		$0 $opts std
+		$0 $opts fd
+		$0 $opts fd0-bare fd1-bare
+		$0 $opts hda hdb hdc hdd
+		$0 $opts sda sdb sdc sdd
+		$0 $opts scd0 scd1
+		$0 $opts st0 st1
+		$0 $opts sg
+		$0 $opts pty
+		$0 $opts console
+		$0 $opts ttyS0 ttyS1 ttyS2 ttyS3
+		$0 $opts busmice
+		$0 $opts lp
+		$0 $opts par
+		$0 $opts nvram
+		$0 $opts audio
+		$0 $opts adb
+		$0 $opts fb
+		$0 $opts rtc
+		;;
+	generic-sparc)
+		$0 $opts std
+		$0 $opts fd0-bare fd1-bare
+		$0 $opts hda hdb
+		$0 $opts sda sdb sdc sdd
+		$0 $opts scd0 scd1
+		$0 $opts st0 st1
+		$0 $opts sg
+		$0 $opts pty
+		$0 $opts console
+		$0 $opts ttyS0 ttyS1 ttyS2 ttyS3
+		$0 $opts fb
+		$0 $opts rtc
+		makedev kbd  c 11 0 $cons
+		makedev sunmouse  c 10 6 $mouse
+		symlink sunmouse mouse
+		makedev openprom  c 10 139 $private
 		;;
 	local)
 		$0.local $opts
@@ -232,22 +384,71 @@
 		makedev zero c 1 5 $public
 		symlink core $procfs/kcore
 		makedev full c 1 7 $public
-		$0 ram
+		makedev random c 1 8 $readable
+		makedev urandom c 1 9 $readable
 		makedev tty  c 5 0 $tty
+		$0 $opts ram
+		$0 $opts loop
+		;;
+	hamradio)
+		$0 $opts scc
+		$0 $opts bc
+		;;
+	scc)
+		for unit in 0 1 2 3 4 5 6 7 
+		do
+			makedev scc$unit c 34 $unit $system
+		done
+		;;
+	bc)	
+		for unit in 0 1 2 3
+		do
+			makedev bc$unit c 51 $unit $system
+		done
+		;;
+	random)
+		makedev random c 1 8 $readable
+		;;
+	urandom)
+		makedev urandom c 1 9 $readable
 		;;
 	ram)
-		for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do
+		for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do
 			makedev ram$i  b 1 $i $disk
 		done
-		ln -sf ram1 ram
+		symlink ram ram1
 		;;
-	console)
-		major=`Major vcs`	# not fatal
-		# console
+	ram[0-9]|ram1[0-6])
+		unit=`suffix $arg ram`
+		makedev ram$unit b 1 $unit $disk
+		;;
+	initrd)
+		makedev initrd b 1 250 $disk
+		;;
+	consoleonly)
 		makedev tty0 c 4 0 $cons
-		symlink console tty0
+		#	new kernels need a device, old ones a symlink... sigh
+		kern_rev1=`uname -r | awk -F'.' '{print $1}'`
+		kern_rev2=`uname -r | awk -F'.' '{print $2}'`
+		if [ $kern_rev1 -gt 2 ]
+		then
+			makedev console c 5 1 $cons
+		else
+			if [ $kern_rev1 -eq 2 -a $kern_rev2 -ge 1 ]
+			then
+				makedev console c 5 1 $cons
+			else
+				symlink console tty0
+			fi
+		fi
+		;;
+	console)
+		$0 $opts consoleonly
+		major=`Major vcs 7`       # not fatal
 		[ "$major" ] && makedev vcs0 c $major 0 $vcs
-		[ "$major" ] && makedev vcsa c $major 128 $vcs
+		symlink vcs vcs0
+		[ "$major" ] && makedev vcsa0 c $major 128 $vcs
+		symlink vcsa vcsa0
 		# individual vts
 		line=1
 		while [ $line -le $MAXVT -a $line -le 63 ]
@@ -258,6 +459,32 @@
 			line=`math $line + 1`
 		done
 		;;
+	adb)
+		# pick the right arch device using dpkg's knowledge
+		case `dpkg --print-installation-architecture` in
+			powerpc)
+				# ADB bus devices (char)
+				makedev adb c 56 0 $mouse
+				makedev adbmouse c 10 10 $mouse
+				;;
+			m68k)
+				# ACSI disk 2, whole device (block)
+				makedev adb b 28 16 $disk
+				for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+				do
+					minor=$(( 16 + $part ))
+					makedev adb$part b 28 $minor $disk
+				done
+				;;
+			*)
+				echo "no support for adb on $arg" >&2
+				exit 1
+				;;
+		esac
+		;;
+	nvram)
+		makedev nvram c 10 144 $kmem
+		;;
 	tty[1-9]|tty[1-5][0-9]|tty[6][0-3])
 		line=`suffix $arg tty`
 		makedev tty$line c 4 $line $tty
@@ -265,8 +492,7 @@
 	ttyS[0-9]|ttyS[1-5][0-9]|ttyS[6][0-3])
 		line=`suffix $arg ttyS`
 		minor=`math 64 + $line`
-		makedev ttyS$line c 4 $minor $tty
-		makedev cua$line c 5 $minor $dialout
+		makedev ttyS$line c 4 $minor $dialout
 		;;
 	pty[a-ep-z])
 		bank=`suffix $arg pty`
@@ -285,42 +511,350 @@
 		do
 			ptysufs="$ptysufs pty$i"
 		done
-		$0 $opts $ptysufs
+		$0 $opts $ptysufs ptmx
 		;;
-	cyclades)
-		major1=`Major ttyC` || continue
-		major2=`Major cub` || continue
+	ptmx)
+		# master pty multiplexer for 2.1 kernels
+		makedev ptmx c 5 2 $tty
+		;;
+	cyclades|ttyC)
+		major1=`Major ttyC 19` || continue
+		#major2=`Major cub 20` || continue
 		for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \
-                         16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
+                         16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
+		do
+			makedev ttyC$i c $major1 $i $dialout
+			#makedev cub$i c $major2 $i $dialout
+		done
+		;;
+	stallion|ttyE)
+		major1=`Major ttyE 24` || continue
+		#major2=`Major cue 25` || continue
+		majorc=28
+		minor=0
+		until [ $minor -gt 256 ]
+		do
+			makedev ttyE$minor c $major1 $minor $dialout
+			#makedev cue$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		for i in 0 1 2 3
+		do
+			makedev staliomem$i c $majorc $i $private
+		done
+		;;
+	chase|ttyH)
+		major1=`Major ttyH 17` || continue
+		#major2=`Major cuh 18` || continue
+		minor=0
+		until [ $minor -gt 16 ] # tell me if 16 is wrong
+		do
+			makedev ttyH$minor c $major1 $minor $dialout
+			#makedev cuh$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	rocketport|ttyR)
+		major1=`Major ttyR 46` || continue
+		#major2=`Major cur 47` || continue
+		minor=0
+		until [ $minor -gt 64 ] # tell me if 64 is wrong
+		do
+			makedev ttyR$minor c $major1 $minor $dialout
+			#makedev cur$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	ttyV)
+		major1=`Major ttyV 105` || continue
+		#major2=`Major cuv 106` || continue
+		minor=0
+		until [ $minor -gt 16 ] # tell me if 16 is wrong
+		do
+			makedev ttyV$minor c $major1 $minor $dialout
+			#makedev cuv$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	digi|ttyD)
+		major1=`Major ttyD 22` || continue
+		#major2=`Major cud 23` || continue
+		minor=0
+		until [ $minor -gt 16 ] # tell me if 16 is wrong
+		do
+			makedev ttyD$minor c $major1 $minor $dialout
+			#makedev cud$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	specialix|ttyX)
+		major1=`Major ttyX 32` || continue
+		#major2=`Major cux 33` || continue
+		minor=0
+		until [ $minor -gt 16 ] # tell me if 16 is wrong
+		do
+			makedev ttyX$minor c $major1 $minor $dialout
+			#makedev cux$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	specialixIO8|ttyW)
+		major1=`Major ttyW 75` || continue
+		#major2=`Major cuw 76` || continue
+		minor=0
+		until [ $minor -gt 16 ] # tell me if 16 is wrong
+		do
+			makedev ttyW$minor c $major1 $minor $dialout
+			#makedev cuw$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	PAM|ttyM)
+		major1=`Major ttyM 79` || continue
+		#major2=`Major cum 80` || continue
+		minor=0
+		until [ $minor -gt 16 ] # tell me if 16 is wrong
+		do
+			makedev ttyM$minor c $major1 $minor $dialout
+			#makedev cum$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	riscom|ttyL)
+		major=`Major ttyL 48` || continue
+		minor=0
+		until [ $minor -gt 16 ] # tell me if 16 is wrong
+		do
+			makedev ttyL$minor c $major $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	computone|ttyF)
+		major=`Major ttyF 71` || continue
+		#major2=`Major cuf 72` || continue
+		minor=0
+		until [ $minor -gt 255 ]
+		do
+			makedev ttyF$minor c $major $minor $dialout
+			#makedev cuf$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		major=73
+		for i in 0 4 8 12
+		do
+			makedev ip2ipl$i  c $major $i $private
+			makedev ip2stat$i c $major `math $i + 1` $private
+		done
+		;;
+	ESP|ttyP)
+		major=`Major ttyP 57` || continue
+		#major2=`Major cup 58` || continue
+		minor=0
+		until [ $minor -gt 4 ] # tell me if 4 is wrong
+		do
+			makedev ttyP$minor c $major $minor $dialout
+			#makedev cup$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	COMX|comx)
+		major=`Major comx 88` || continue
+		minor=0
+		until [ $minor -gt 4 ] # tell me if 4 is wrong
+		do
+			makedev comx$minor c $major $minor $private
+			minor=`math $minor + 1`
+		done
+		;;
+	isdnmodem|ttyI)
+		major1=`Major ttyI 43` || continue
+		#major2=`Major cui 44` || continue
+		minor=0
+		until [ $minor -gt 63 ]
+		do
+			makedev ttyI$minor c $major1 $minor $dialout
+			#makedev cui$minor c $major2 $minor $dialout
+			minor=`math $minor + 1`
+		done
+		;;
+	isdnbri)
+		major=45
+		minor=0
+		until [ $minor -gt 63 ]
+		do
+			makedev isdn$minor c $major $minor $private
+			makedev isdnctrl$minor c $major `math $minor + 64` $private
+			makedev ippp$minor c $major `math $minor + 128` $private
+			minor=`math $minor + 1`
+		done
+		makedev isdninfo c $major 255 $private
+		;;
+	dcbri)
+		major=52
+		for i in 0 1 2 3
+		do
+			makedev dcbri$i c $major $i $private
+		done
+		;;
+	capi)
+		major=68
+		makedev capi20 c $major 0 $private
+		for i in 0 1 2 3 4 5 6 7 8 9
+		do
+			makedev capi20.0$i c $major `math $i + 1` $private
+		done
+		for i in 10 11 12 13 14 15 16 17 18 19
+		do
+			makedev capi20.$i c $major `math $i + 1` $private
+		done
+		;;
+	fb)
+		for i in 0 1 2 3 4 5 6 7
+		do
+			makedev fb$i c 29 `math 32 \* $i` $cons
+			makedev fb${i}current c 29 `math 32 \* $i` $cons
+			makedev fb${i}autodetect c 29 `math 32 \* $i + 1` $cons
+		done
+		;;
+	fb[0-7])
+		dev=`suffix $arg fb`
+		base=`math 32 \* $dev`
+		makedev fb$dev c 29 $base $cons
+		makedev fb${dev}current c 29 $base $cons
+		makedev fb${dev}autodetect c 29 `math $base + 1` $cons
+		for i in 0 1 2 3 4 5 6 7
 		do
-			makedev ttyC$i c $major1 $i $tty
-			makedev cub$i c $major2 $i $dialout
+			makedev fb${dev}user$i c 29 `math $base + 24 + $i` $cons
+		done
+		;;
+	netlink)
+		makedev route     c 36 0 $coda
+		makedev skip      c 36 1 $coda
+		makedev fwmonitor c 36 3 $coda
+		for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+		do
+			makedev tap$i c 36 `math $i + 16` $coda
 		done
 		;;
 	lp)
-		major=`Major lp` || continue
+		major=`Major lp 6` || continue
 		makedev ${arg}0 c $major 0 $printer
 		makedev ${arg}1 c $major 1 $printer
 		makedev ${arg}2 c $major 2 $printer
 		;;
 	par)
-		major=`Major lp` || continue
+		major=`Major lp 6` || continue
+		makedev ${arg}0 c $major 0 $printer
+		makedev ${arg}1 c $major 1 $printer
+		makedev ${arg}2 c $major 2 $printer
+		;;
+	parport)
+		major=`Major parport 99` || continue
 		makedev ${arg}0 c $major 0 $printer
 		makedev ${arg}1 c $major 1 $printer
 		makedev ${arg}2 c $major 2 $printer
 		;;
+	slm)
+		major=`Major slm 28` || continue
+		for i in 0 1 2 3
+		do
+			makedev slm c $major $i $printer
+		done
+		;;
 	busmice)
 		major=`Major mouse 10` || continue
-		makedev logimouse c $major 0 $mouse
-		makedev psmouse   c $major 1 $mouse
-		makedev msmouse   c $major 2 $mouse
-		makedev atimouse  c $major 3 $mouse
-		makedev jmouse    c $major 4 $mouse
+		makedev logibm	  c $major 0 $mouse
+		makedev psaux     c $major 1 $mouse
+		makedev inportbm  c $major 2 $mouse
+		makedev atibm     c $major 3 $mouse
+		makedev jbm       c $major 4 $mouse
+		makedev usbmouse  c $major 32 $mouse
+		;;
+	m68k-mice)
+		major=`Major mouse 10` || continue
+		makedev amigamouse c $major 4 $mouse
+		makedev atarimouse c $major 5 $mouse
+		makedev amigamouse1 c $major 7 $mouse
+		makedev adbmouse  c $major 10 $mouse
+		;;
+	3dfx)
+		major=`Major $arg 107` || continue
+		makedev $arg	c $major 0 $video
+		;;
+	agpgart)
+		major=`Major $arg 10` || continue
+		makedev $arg	c $major 175 $video
+		;;
+	ipmi|ipmikcs)
+		major=`Major ipmikcs 10` || continue
+		makedev ipmikcs	c $major 173 $private
+		;;
+	irda)
+		for i in 0 1
+		do
+			makedev ircomm$i c 161 $i $mouse
+			makedev irlpt$i  c 161 `math $i + 16` $mouse
+		done
+		;;
+	misc)
+		major=`Major mouse 10` || continue
+		makedev logibm	  c $major 0 $mouse
+		makedev psaux     c $major 1 $mouse
+		makedev inportbm  c $major 2 $mouse
+		makedev atibm     c $major 3 $mouse
+		makedev jbm       c $major 4 $mouse
+		makedev amigamouse c $major 4 $mouse
+		makedev atarimouse c $major 5 $mouse
+		makedev sunmouse  c $major 6 $mouse
+		makedev amigamouse1 c $major 7 $mouse
+		makedev smouse    c $major 8 $mouse
+		makedev pc110pad  c $major 9 $mouse
+		makedev adbmouse  c $major 10 $mouse
+		makedev beep      c $major 128 $mouse
+		makedev modreq    c $major 129 $mouse
+		makedev watchdog  c $major 130 $mouse
+		makedev temperature c $major 131 $mouse
+		makedev hwtrap    c $major 132 $mouse
+		makedev exttrp    c $major 133 $mouse
+		makedev apm_bios  c $major 134 $mouse
+		makedev rtc       c $major 135 $mouse
+		makedev openprom  c $major 139 $mouse
+		makedev relay8    c $major 140 $mouse
+		makedev relay16   c $major 141 $mouse
+		makedev msr       c $major 142 $mouse
+		makedev pciconf   c $major 143 $mouse
+		makedev nvram     c $major 144 $mouse
+		makedev hfmodem   c $major 145 $mouse
+		makedev led       c $major 151 $mouse
+		makedev mergemem  c $major 153 $mouse
+		makedev pmu       c $major 154 $mouse
+		;;
+	smapi|thinkpad)
+		major=`Major mouse 10` || continue
+		makedev smapi     c $major 170 $mouse
+		symlink smapi thinkpad
+		;;
+        rtc)
+		major=`Major mouse 10` || continue
+		makedev rtc       c $major 135 $mouse
 		;;
 	js)
-		major=`Major Joystick` || continue
-		makedev js0 c $major 0 $mouse
-		makedev js1 c $major 1 $mouse
+		major=`Major Joystick 15` || continue
+		for unit in 0 1 2 3
+		do
+			makedev js$unit c $major $unit $readable
+			makedev djs$unit c $major `math $unit + 128` $readable
+		done
+		;;
+	fd[0-7]-bare)
+		sarg="${arg%-bare}" 
+		major=`Major fd 2` || continue
+		base=`suffix $sarg fd`
+		if [ $base -ge 4 ]
+		then
+			base=`math $base + 124`
+		fi
+		makedev ${sarg} b $major $base $floppy
 		;;
 	fd[0-7])
 		major=`Major fd 2` || continue
@@ -332,39 +866,47 @@
 		makedev ${arg} b $major $base $floppy
 		makedev ${arg}d360  b $major `math $base +  4` $floppy
 		makedev ${arg}h1200 b $major `math $base +  8` $floppy
-		makedev ${arg}D360  b $major `math $base + 12` $floppy
-		makedev ${arg}D720  b $major `math $base + 16` $floppy
+		makedev ${arg}u360  b $major `math $base + 12` $floppy
+		makedev ${arg}u720  b $major `math $base + 16` $floppy
 		makedev ${arg}h360  b $major `math $base + 20` $floppy
 		makedev ${arg}h720  b $major `math $base + 24` $floppy
-		makedev ${arg}H1440 b $major `math $base + 28` $floppy
-		makedev ${arg}E2880 b $major `math $base + 32` $floppy
+		makedev ${arg}u1440 b $major `math $base + 28` $floppy
+		makedev ${arg}u2880 b $major `math $base + 32` $floppy
 		makedev ${arg}CompaQ b $major `math $base + 36` $floppy
 
-		symlink ${arg}H360 ${arg}D360
-		symlink ${arg}H720 ${arg}D720
-
 		makedev ${arg}h1440 b $major `math $base + 40` $floppy
-		makedev ${arg}H1680 b $major `math $base + 44` $floppy
+		makedev ${arg}u1680 b $major `math $base + 44` $floppy
 		makedev ${arg}h410  b $major `math $base + 48` $floppy
-		makedev ${arg}H820  b $major `math $base + 52` $floppy
+		makedev ${arg}u820  b $major `math $base + 52` $floppy
 		makedev ${arg}h1476 b $major `math $base + 56` $floppy
-		makedev ${arg}H1722 b $major `math $base + 60` $floppy
+		makedev ${arg}u1722 b $major `math $base + 60` $floppy
 		makedev ${arg}h420  b $major `math $base + 64` $floppy
-		makedev ${arg}H830  b $major `math $base + 68` $floppy
+		makedev ${arg}u830  b $major `math $base + 68` $floppy
 		makedev ${arg}h1494 b $major `math $base + 72` $floppy
-		makedev ${arg}H1743 b $major `math $base + 76` $floppy
+		makedev ${arg}u1743 b $major `math $base + 76` $floppy
 		makedev ${arg}h880  b $major `math $base + 80` $floppy
-		makedev ${arg}D1040 b $major `math $base + 84` $floppy
-		makedev ${arg}D1120 b $major `math $base + 88` $floppy
+		makedev ${arg}u1040 b $major `math $base + 84` $floppy
+		makedev ${arg}u1120 b $major `math $base + 88` $floppy
 		makedev ${arg}h1600 b $major `math $base + 92` $floppy
-		makedev ${arg}H1760 b $major `math $base + 96` $floppy
-		makedev ${arg}H1920 b $major `math $base + 100` $floppy
-		makedev ${arg}E3200 b $major `math $base + 104` $floppy
-		makedev ${arg}E3520 b $major `math $base + 108` $floppy
-		makedev ${arg}E3840 b $major `math $base + 112` $floppy
-		makedev ${arg}H1840 b $major `math $base + 116` $floppy
-		makedev ${arg}D800  b $major `math $base + 120` $floppy
-		makedev ${arg}H1600 b $major `math $base + 124` $floppy
+		makedev ${arg}u1760 b $major `math $base + 96` $floppy
+		makedev ${arg}u1920 b $major `math $base + 100` $floppy
+		makedev ${arg}u3200 b $major `math $base + 104` $floppy
+		makedev ${arg}u3520 b $major `math $base + 108` $floppy
+		makedev ${arg}u3840 b $major `math $base + 112` $floppy
+		makedev ${arg}u1840 b $major `math $base + 116` $floppy
+		makedev ${arg}u800  b $major `math $base + 120` $floppy
+		makedev ${arg}u1600 b $major `math $base + 124` $floppy
+		;;
+	ed[a-b])
+		major=`Major ed 36` || continue
+		unit=`suffix $arg ed`
+		base=`index ab $unit`
+		base=`math $base \* 64`
+		makedev ed$unit b $major $base $disk
+		for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20
+		do
+			makedev ed$unit$part b $major `math $base + $part` $disk
+		done
 		;;
 	hd[a-b])
 		major=`Major ide0` || major=`Major hd 3` || continue
@@ -372,7 +914,7 @@
 		base=`index ab $unit`
 		base=`math $base \* 64`
 		makedev hd$unit b $major $base $disk
-		for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
 		do
 			makedev hd$unit$part b $major `math $base + $part` $disk
 		done
@@ -383,9 +925,9 @@
 		base=`index cd $unit`
 		base=`math $base \* 64`
 		makedev hd$unit b $major $base $disk
-		for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
 		do
-			makedev hd$unit$part b $major `expr $base + $part` $disk
+			makedev hd$unit$part b $major $(( $base + $part )) $disk
 		done
 		;;
 	hd[e-f])
@@ -394,9 +936,9 @@
 		base=`index ef $unit`
 		base=`math $base \* 64`
 		makedev hd$unit b $major $base $disk
-		for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
 		do
-			makedev hd$unit$part b $major `expr $base + $part` $disk
+			makedev hd$unit$part b $major $(( $base + $part )) $disk
 		done
 		;;
 	hd[g-h])
@@ -405,18 +947,47 @@
 		base=`index gh $unit`
 		base=`math $base \* 64`
 		makedev hd$unit b $major $base $disk
-		for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+		do
+			makedev hd$unit$part b $major $(( $base + $part )) $disk
+		done
+		;;
+	hd[i-j])
+		major=`Major ide4 56` || continue
+		unit=`suffix $arg hd`
+		base=`index ij $unit`
+		base=`math $base \* 64`
+		makedev hd$unit b $major $base $disk
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
 		do
-			makedev hd$unit$part b $major `expr $base + $part` $disk
+			makedev hd$unit$part b $major $(( $base + $part )) $disk
 		done
 		;;
-	ht)
+	hd[k-l])
+		major=`Major ide4 57` || continue
+		unit=`suffix $arg hd`
+		base=`index kl $unit`
+		base=`math $base \* 64`
+		makedev hd$unit b $major $base $disk
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+		do
+			makedev hd$unit$part b $major $(( $base + $part )) $disk
+		done
+		;;
+	ht0)
 		major=`Major ht0 37` || continue
 		# Only one IDE tape drive is currently supported; ht0.
 		makedev ht0 c $major 0 $tape
-		makedev ht0 c $major 0 $tape
 		makedev nht0 c $major 128 $tape
 		;;
+	pt)
+		major=`Major pt 96` || continue
+		for i in 0 1 2 3
+		do
+			makedev pt$i c $major $i $tape
+			makedev npt$i c $major `math $i + 128` $tape
+		done
+		;;
 	xd[a-d])
 		major=`Major xd 13` || continue
 		unit=`suffix $arg xd`
@@ -425,31 +996,139 @@
 		makedev xd$unit b $major $base $disk
 		for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15 16 17 18 19 20
 		do
-			makedev xd$unit$part b $major `expr $base + $part` $disk
+			makedev xd$unit$part b $major $(( $base + $part )) $disk
 		done
 		;;
-	sd[a-h])
+	sd[a-z])
 		major=`Major sd 8` || continue
 		unit=`suffix $arg sd`
-		base=`index abcdefgh $unit`
-		base=`math $base \* 16`
+		base=`index abcdefghijklmnopqrstuvwxyz $unit`
+		base=$(( $base * 16 ))
+		if [ $base -lt 256 ]; then
+			major=8
+		else
+			major=65
+			base=$(( $base - 256 ))
+		fi
+		makedev sd$unit b $major $base $disk
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+		do
+			minor=$(( $base + $part ))
+			makedev sd$unit$part b $major $minor $disk
+		done
+		;;
+	sd[a-d][a-z])
+		unit=`suffix $arg sd`
+		unitmaj=`first $unit`
+		unitmin=`second $unit`
+		basemaj=`index Xabcd $unitmaj`
+		basemin=`index abcdefghijklmnopqrstuvwxyz $unitmin`
+		basemaj=`math $basemaj \* 416`
+		basemin=`math $basemin \* 16`
+		base=`math $basemaj + $basemin`
+		basemaj=`math $base / 256`
+		base=`math $base % 256`
+		major=`math basemaj \+ 64`
+		if [ $major -gt 71 ]; then
+			echo "$0: don't know how to make device \"$arg\"" >&2
+			exit 0
+		fi
 		makedev sd$unit b $major $base $disk
-		for part in 1 2 3 4 5 6 7 8 # 9 10 11 12 13 14 15
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 		do
-			minor=`expr $base + $part`
+			minor=$(( $base + $part ))
 			makedev sd$unit$part b $major $minor $disk
 		done
+                ;;
+	ad[a-p])
+		major=`Major ad 28` || continue
+		unit=`suffix $arg ad`
+		base=`index abcdefghijklmnop $unit`
+		base=`math $base \* 16`
+		makedev ad$unit b $major $base $disk
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+		do
+			minor=$(( $base + $part ))
+			makedev ad$unit$part b $major $minor $disk
+		done
+		;;
+	dac960)
+		for ctr in 0 1 2 3 4 5 6 7
+		do
+			$0 $opts dac960.$ctr
+		done
+		;;
+	dac960.[0-7])
+		[ -d rd ] || {
+			mkdir rd
+			chown root.root rd
+			chmod 755 rd
+		}
+		unit=`suffix $arg dac960.`
+		    major=`math 48 + $unit`
+		    minor=0
+		    for ld in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 \
+			    17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+		    do
+			makedev rd/c${unit}d${ld} b $major $minor $disk
+			minor=`math $minor + 1`
+			for part in 1 2 3 4 5 6 7
+			do
+			    makedev rd/c${unit}d${ld}p$part b $major $minor $disk
+			    minor=`math $minor + 1`
+			done
+		    done
+		;;
+	ida)
+		for ctr in 0 1 2 # 3 4 5 6 7
+		do
+			$0 $opts ida.$ctr
+		done
+		;;
+	ida.[0-7])
+		[ -d ida ] || {
+			mkdir ida
+			chown root.root ida
+			chmod 755 ida
+		}
+		unit=`suffix $arg ida.`
+		major=`math 72 + $unit`
+		minor=0
+		for ld in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+		do
+		    makedev ida/c${unit}d${ld} b $major $minor $disk
+		    minor=`math $minor + 1`
+		    for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+		    do
+			makedev ida/c${unit}d${ld}p$part b $major $minor $disk
+			minor=`math $minor + 1`
+		    done
+		done
+		;;
+	rom)
+		major=`Major rom 31`
+		for i in 0 1 2 3 4 5 6 7
+		do
+			makedev rom$i    b $major $i $disk
+			makedev rrom$i   b $major `math $i +8` $disk
+			makedev flash$i  b $major `math $i +16` $disk
+			makedev rflash$i b $major `math $i +24` $disk
+		done
+		;;
+	nb[0-7])
+		major=`Major nbd 43` || continue
+		minor=`suffix $arg nb`
+		makedev nb$minor b $major $minor $disk
 		;;
 	loop)
-		major=`Major loop` || continue
 		for part in 0 1 2 3 4 5 6 7
 		do
-			makedev loop$part b $major $part $disk
+			makedev loop$part b 7 $part $disk
 		done
 		;;
 	md)
-		major=`Major md` || continue
-		for part in 0 1 2 3
+		major=`Major md 9` || continue
+		for part in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 		do
 			makedev md$part b $major $part $disk
 		done
@@ -457,42 +1136,129 @@
 	st[0-7])
 		major=`Major st 9`
 		unit=`suffix $arg st`
-		makedev st$unit c $major $unit $tape
-		makedev nst$unit c $major `math 128 + $unit` $tape
+		makedev st${unit}   c $major $unit $tape
+		makedev nst${unit}  c $major `math 128 + $unit` $tape
+
+		makedev st${unit}l  c $major `math 32 + $unit` $tape
+		makedev nst${unit}l c $major `math 160 + $unit` $tape
+
+		makedev st${unit}m  c $major `math 64 + $unit` $tape
+		makedev nst${unit}m c $major `math 192 + $unit` $tape
+
+		makedev st${unit}a  c $major `math 96 + $unit` $tape
+		makedev nst${unit}a c $major `math 224 + $unit` $tape
 		;;
 	qic)
 		major=`Major tpqic02 12`
+		makedev ntpqic11   c $major   2 $tape
+		makedev tpqic11    c $major   3 $tape
+		makedev ntpqic24   c $major   4 $tape
+		makedev tpqic24    c $major   5 $tape
+		makedev ntpqic120  c $major   6 $tape
+		makedev tpqic120   c $major   7 $tape
+		makedev ntpqic150  c $major   8 $tape
+		makedev tpqic150   c $major   9 $tape
 		makedev rmt8       c $major   6 $tape
 		makedev rmt16      c $major   8 $tape
 		makedev tape-d     c $major 136 $tape
 		makedev tape-reset c $major 255 $tape
+		$0 $opts qft
 		;;
 	ftape)
-		major=`Major mt 27` || continue
+		major=`Major qft 27` || continue
 		for unit in 0 1 2 3
 		do
-			makedev rft$unit c $major $unit $tape
-			makedev nrft$unit c $major `math $unit + 4` $tape
+			makedev qft$unit     c $major $unit $tape
+			makedev nqft$unit    c $major `math $unit + 4` $tape
+			makedev zqft$unit    c $major `math $unit + 16` $tape
+			makedev nzqft$unit   c $major `math $unit + 20` $tape
+			makedev rawqft$unit  c $major `math $unit + 32` $tape
+			makedev nrawqft$unit c $major `math $unit + 36` $tape
+		done
+		symlink ftape qft0
+		symlink nftape nqft0
+		;;
+	sr|scd|scd-all)
+		major=`Major sr 11` || continue
+		for unit in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+		do
+			makedev scd$unit b $major $unit $cdrom
+			symlink sr$unit scd$unit
 		done
-		symlink ftape rft0
-		symlink nftape nrft0
 		;;
-	scd[0-7])
+	cfs0)
+		makedev cfs0 c 67 0 $coda
+		;;
+	scd[0-9]|scd[0-1][0-9])
 		major=`Major sr 11` || continue
 		unit=`suffix $arg scd`
 		makedev scd$unit b $major $unit $cdrom
+		ln -f scd$unit sr$unit
+		;;
+	ttyI[0-9]|ttyI[1-5][0-9]|ttyI[6][0-3])
+		major=43
+		unit=`suffix $arg ttyI`
+		makedev ttyI$unit c $major $unit $dialout
+		;;
+	ippp[0-9]|ippp[1-5][0-9]|ippp[6][0-3])
+		major=45
+		unit=`suffix $arg ippp`
+		minor=`math $unit + 128`
+		makedev ippp$unit c $major $minor $dialout
+		;;
+	isdn[0-9]|isdn[1-5][0-9]|isdn[6][0-3])
+		major=45
+		unit=`suffix $arg isdn`
+		minor=`math $unit + 0`
+		makedev isdn$unit c $major $minor $dialout
+		;;
+	isdnctrl[0-9]|isdnctrl[1-5][0-9]|isdnctrl[6][0-3])
+		major=45
+		unit=`suffix $arg isdnctrl`
+		minor=`math $unit + 64`
+		makedev isdnctrl$unit c $major $minor $dialout
+		;;
+	isdninfo)
+		makedev isdninfo c 45 255 $dialout
+		;;
+	isdn-tty)
+		major=43
+		for unit in 0 1 2 3 4 5 6 7
+		do
+			makedev ttyI$unit c $major $unit $dialout
+		done
+		;;
+	isdn-ippp)
+		major=45
+		for unit in 0 1 2 3 4 5 6 7
+		do
+			makedev ippp$unit c $major `math $unit + 128` $dialout
+		done
+		;;
+	isdn-io)
+		for unit in 0 1 2 3 4 5 6 7
+		do
+			makedev isdn$unit c 45 $unit $dialout
+			makedev isdnctrl$unit c 45 `math $unit + 64` $dialout
+			makedev ippp$unit c 45 `math $unit + 128` $dialout
+		done
+		makedev isdninfo c 45 255 $dialout
 		;;
 	sonycd)
-		major=`Major cdu31a` || continue
+		major=`Major sonycd 15` || continue
 		makedev $arg b $major 0 $cdrom
 		;;
 	mcd)
 		major=`Major mcd 23` || continue
 		makedev $arg b $major 0 $cdrom
 		;;
-	mcdx)
-		major=`Major mcdx 20` || continue
-		makedev $arg b $major 0 $cdrom
+	mcdx|mcdx[0-4])
+		major=`Major $arg 20` || continue
+		for unit in 0 1 2 3 4
+		do
+			makedev mcdx$unit b $major $unit $cdrom
+		done
+		test -r mcdx || symlink mcdx mcdx0
 		;;
 	cdu535)
 		makedev $arg b 24 0 $cdrom
@@ -501,28 +1267,51 @@
 		makedev $arg b 24 0 $cdrom
 		;;
 	sbpcd|sbpcd[123])
-		major=`Major $arg` || continue
+		major=`Major $arg 25` || continue
 		base=`suffix ${arg}0 sbpcd`
-		# base=`expr ${arg}0 : "sbpcd\(.\)"`
 		for minor in 0 1 2 3
 		do
 			# XXX
-			unit=`expr substr 0123456789abcdef \( $base \* 4 + $minor + 1 \) 1`
+			unit=$(substr 0123456789abcdef $(( $base * 4 + $minor + 1 )) )
 			makedev sbpcd$unit b $major $minor $cdrom
 		done
 		[ $arg = sbpcd ] && symlink $arg ${arg}0
 		;;
 	aztcd)
-		major=`Major $arg` || continue
+		major=`Major $arg 29` || continue
+		makedev ${arg}0 b $major 0 $cdrom
+		;;
+	cm206cd)
+		major=`Major $arg 30` || continue
+		makedev ${arg}0 b $major 0 $cdrom
+		;;
+	gscd)
+		major=`Major $arg 16` || continue
 		makedev ${arg}0 b $major 0 $cdrom
 		;;
 	bpcd)
 		makedev $arg b 41 0 $cdrom
 		;;
+	optcd)
+		makedev $arg b 17 0 $cdrom
+		;;
+	sjcd)
+		makedev $arg b 18 0 $cdrom
+		;;
+	cfs|coda)
+		makedev cfs0 c 67 0 $private
+		;;
+	xfs|arla)
+		makedev xfs0 c 103 0 $private
+		;;
 	logiscan)
 		major=`Major logiscan` || continue
 		makedev $arg c $major 0 $scanner
 		;;
+	toshiba)
+		major=`Major $arg 10` || continue
+		makedev $arg c $major 181 root root 0666
+		;;
 	m105scan)
 		major=`Major m105` || continue
 		makedev $arg c $major 0 $scanner
@@ -534,34 +1323,119 @@
 	audio)
 		major=`Major sound 14`
 		makedev mixer      c $major  0 $audio
+		makedev mixer1     c $major 16 $audio
+		makedev mixer2     c $major 32 $audio
+		makedev mixer3     c $major 48 $audio
 		makedev sequencer  c $major  1 $audio
 		makedev midi00     c $major  2 $audio
-		makedev dsp        c $major  3 $audio
-		makedev audio      c $major  4 $audio
-		makedev sndstat    c $major  6 $audio
-#		makedev sequencer2 c $major  8 $audio
-		makedev mixer1     c $major 16 $audio
-#		makedev patmgr0    c $major 17 $audio
 		makedev midi01     c $major 18 $audio
-		makedev dsp1       c $major 19 $audio
-		makedev audio1     c $major 20 $audio
-#		makedev patmgr1    c $major 33 $audio
 		makedev midi02     c $major 34 $audio
 		makedev midi03     c $major 50 $audio
+		makedev dsp        c $major  3 $audio
+		makedev dsp1       c $major 19 $audio
+		makedev dsp2       c $major 35 $audio
+		makedev dsp3       c $major 51 $audio
+		makedev audio      c $major  4 $audio
+		makedev audio1     c $major 20 $audio
+		makedev audio2     c $major 36 $audio
+		makedev audio3     c $major 52 $audio
+		makedev sndstat    c $major  6 $audio
+		makedev audioctl   c $major  7 $audio
+		major=31
+		makedev mpu401data c $major 0  $audio
+		makedev mpu401stat c $major 1  $audio
+		major=35
+		for i in 0 1 2 3
+		do
+			makedev midi$i  c $major $i $audio
+			makedev rmidi$i c $major `math $i + 64` $audio
+			makedev smpte$i c $major `math $i + 128` $audio
+		done
 		;;
 	pcaudio)
-		major=`Major pcsp` || continue
+		major=`Major pcsp 13` || continue
 		makedev pcmixer c $major 0 $audio
 		makedev pcsp    c $major 3 $audio
 		makedev pcaudio c $major 4 $audio
 		;;
-	sg)
+	video|video4linux|v4l|radio)
+		# video4linux api includes radio, teletext, etc.
+		major=`Major video 81` || continue
+		minor=0
+		until [ $minor -gt 63 ]
+		do
+			makedev video$minor c $major $minor $video
+			makedev radio$minor c $major `math $minor + 64` $video
+			minor=`math $minor + 1`
+		done
+		symlink radio radio0
+		minor=0
+		until [ $minor -gt 31 ]
+		do
+			makedev vtx$minor c $major `math $minor + 192` $video
+			makedev vbi$minor c $major `math $minor + 224` $video
+			minor=`math $minor + 1`
+		done
+		symlink video video0
+		symlink vbi vbi0
+		major=82
+		minor=0
+		until [ $minor -gt 1 ]
+		do
+			makedev winradio$minor c $major $minor $video
+			minor=`math $minor + 1`
+		done
+		major=83
+		makedev vtx     c $major 0 $video
+		makedev vttuner c $major 16 $video
+		;;
+	i2c)
+		major=`Major i2c 89` || continue
+		minor=0
+		until [ $minor -gt 1 ] # tell me if 1 is wrong...
+		do
+			makedev i2c-$minor c $major $minor $private
+			minor=`math $minor + 1`
+		done
+		;;
+	tlk)
+		major=102
+		minor=0
+		until [ $minor -gt 3 ] # tell me if 3 is wrong...
+		do
+			makedev tlk$minor c $major $minor $video
+			minor=`math $minor + 1`
+		done
+		;;
+	srnd)
+		makedev srnd0 c 110 0 $video
+		makedev srnd1 c 110 1 $video
+		;;
+	fgrab)
+		makedev mmetfgrab c 40 0 $video
+		makedev wvisfgrab c 26 0 $video
+		for i in 0 1 # more?
+		do
+			makedev iscc$i    c 93 $i $video
+			makedev isccctl$i c 93 `math $i + 128` $video
+		done
+		for i in 0 1 # more?
+		do
+			makedev dcxx$i c 94 $i $video
+		done
+		;;
+	sg|sg-all)
 		major=`Major sg 21`
-		for unit in a b c d e f g h
+		for unit in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 		do
-			minor=`index abcdefgh $unit`
-			# minor=`expr abcdefgh : ".*$unit" - 1`
-			makedev $arg$unit c $major $minor $scsi
+			makedev sg$unit c $major $unit $scsi
+		done
+		;;
+	pg)
+		major=`Major pg 97`
+		for unit in 0 1 2 3
+		do
+			makedev pg$unit c $major $unit $scsi
 		done
 		;;
 	fd)
@@ -572,15 +1446,34 @@
 		symlink stderr fd/2
 		;;
 	ibcs2)
-		major=`Major ibcs2` || continue
+		major=`Major ibcs2 30` || continue
 		makedev socksys c $major 0 $ibcs2
 		symlink nfsd socksys
 		makedev spx     c $major 1 $ibcs2
 		symlink X0R null
 		;;
+	netlink)
+		major=36
+		makedev route c $major 0 $private
+		makedev skip  c $major 1 $private
+		;;
+	enskip)
+		major=64
+		makedev enskip c $major 0 $private
+		;;
+	ipfilt*)
+		major=95
+		makedev ipl     c $major 0 $private
+		makedev ipnat   c $major 1 $private
+		makedev ipstate c $major 2 $private
+		makedev ipauth  c $major 3 $private
+		;;
+	qng)
+		makedev qng c 77 0 $private
+		;;
 	apm)
-		major=`Major apm_bios` || continue
-		makedev $arg c $major 0 $system
+		major=`Major mouse 10` || continue
+		makedev apm_bios  c $major 134 $mouse
 		;;
 	dcf)
 		major=`Major dcf` || continue
@@ -590,6 +1483,11 @@
 		major=`Major hw` || continue
 		makedev helloworld c $major 0 $public
 		;;
+	ipsec)
+		# For the Free S/WAN (http://www.xs4all.nl/~freeswan/)
+		# implementation of IPSEC
+		makedev ipsec c 36 10 $ipsec
+		;;
 	update)
 		if [ ! "$devices" ]
 		then
@@ -619,7 +1517,6 @@
 					create="$create "`cvt $device`
 				fi
 				devs=`strip " $devs " $device`
-				# devs=`expr "$devs" : "\(.*\) $device"``expr "$devs" : ".* $device\(.*\)"`
 			done
 			exec 3<&-
 		fi
@@ -637,6 +1534,7 @@
 		;;
 	*)
 		echo "$0: don't know how to make device \"$arg\"" >&2
+		exit 1
 		;;
 	esac
 done
--- makedev-2.3.1.orig/Makefile
+++ makedev-2.3.1/Makefile
@@ -1,14 +1,15 @@
 # $Id: Makefile,v 2.2 1995/05/21 17:45:18 alfie Exp $
 
+BINDIR  = $(ROOT)/sbin
 DEVDIR  = $(ROOT)/dev
-MANDIR  = $(ROOT)/usr/man
+MANDIR  = $(ROOT)/usr/share/man
 MANEXT  = 8
 
 default:
 	@echo Nothing to make.
 	
 install:
-	install -m 755 MAKEDEV $(DEVDIR)
+	install -m 755 MAKEDEV $(BINDIR)
 	install -m 644 MAKEDEV.man $(MANDIR)/man$(MANEXT)/MAKEDEV.$(MANEXT)
 
 clean:
--- makedev-2.3.1.orig/debian/old/README.debian
+++ makedev-2.3.1/debian/old/README.debian
@@ -0,0 +1,95 @@
+makedev for DEBIAN
+==================
+
+The /etc/makedev.cfg and /etc/devinfo files are rewritten to fit the
+Debian /dev layout.
+
+Security : all mouse devices are changed to mode 600. Only serial
+devices are mode 660 root:dialout. It's possible to crash x11 and
+console with writing random bytes to a mouse device.
+
+Serial console :
+/dev/console should be a symlink to your real console device.
+If it does not exist, or is not a symlink, it will be replaced with a
+symlink console -> tty0.
+
+This version of makedev will check /dev for tty*/pty* devices, and if
+there are some with the old major number, it will create a
+/etc/rc.boot/makedev script. This will script will change the
+master/slave devices the next time you boot.
+
+serial devices should be owned by user "uucp" and group "dialout".
+former they were owned by root. new devices are created with uucp as
+owner, but you will have to change old devices to user uucp on your own.
+It's new policy to have all serial devices owned by uucp, but the last
+word in this discussion isn't said...
+
+some device names have changed. please read
+/usr/doc/makedev/devices.{txt|html}
+
+the permissions should be secure enough, but if you find any bugs, or
+unfounded hard permissions, please let me know (i don't know much about
+the right permissions for devices, i yust used the value, everybody else
+was using, and made read & write only available for root, whenever i
+found nothing better.
+
+/dev/console is now a symlink to /dev/tty0. for more infomation, please
+look at a new 2.1 linux kernel : Documentation/devices.txt. That is the
+"Linux Allocated Device" paper, the official list of linux devices.
+If your boot console is a serial device, you will have to change that
+symlink.
+
+MAKEDEV-C will not work with any kernel with mcdx support, if
+/proc/devices contains "Mitsumi CD-ROM". if so, patch
+/usr/src/linux/driver/cdrom/mcdx.c :
+1149c1149
+<     if (unregister_blkdev(MAJOR_NR, "mcdx") != 0) {
+---
+>     if (unregister_blkdev(MAJOR_NR, DEVICE_NAME) != 0) {
+1270c1270
+< 		if (register_blkdev(MAJOR_NR, "mcdx", &mcdx_fops) != 0) {
+---
+> 		if (register_blkdev(MAJOR_NR, DEVICE_NAME, &mcdx_fops) != 0) {
+
+
+about call out devices (/dev/cu*) :
+
+      /dev/ttySxx devices are fully POSIX-compliant TTY devices.  If you
+      are only going to be using one set of tty devices, you should be
+      using /dev/ttySxx.
+
+      /dev/cuaXX devices are different from /dev/ttySXX in two ways ---
+      first of all, they will allow you to open the device even if
+      CLOCAL is not set and the O_NONBLOCK flag was not given to the
+      open device.  This allows programs that don't use the
+      POSIX-mondated interface for opening /dev/ttySxx devices to be
+      able to use /dev/cuaXX to make outgoing phone calls on their modem
+      (cu stands for "callout", and is taken from SunOS).
+
+      The second way in which /dev/cuaXX differs from /dev/ttySXX is
+      that if they are used, they will trigger a simplistic kernel-based
+      locking scheme: If /dev/ttySXX is opened by one or more processes,
+      then an attempt to open /dev/cuaXX will return EAGAIN.  If
+      /dev/cuaXX is opened by one or more processes, then an attempt to
+      open /dev/ttySXX will result the open blocking until /dev/cuaXX is
+      closed, and the carrier detect line goes high. the open blocking
+      until /dev/cuaXX is closed, and the carrier detect line goes high.
+
+      While this will allow for simple lockouts between a user using a
+      modem for callout and a getty listening on the line for logins, it
+      doesn't work if you need to arbitrate between multiple programs
+      wanting to do dialout --- for example, users wanting to do dialout
+      and UUCP.
+
+      I originally implemented the cuaXX/ttySXX lockout mechanism back
+      before FSSTND established a standard convention for the use of tty
+      lock files.  Now that it's there, people should use the tty lock
+      files and not try using /dev/cuaXX.  The only reason why
+      /dev/cuaXX hasn't disappeared yet is for backwards compatibility
+      reasons.			  -- Theodore Ts'o <tytso@mit.edu>
+
+
+debian has no /dev/cu* devices. But you can create them, if you need
+them. Read devices.txt for details.
+
+Andreas Jellinghaus <aj@debian.org>, Sun, 13 Apr 1997 21:05:58 +0200
--- makedev-2.3.1.orig/debian/old/devices.sgml
+++ makedev-2.3.1/debian/old/devices.sgml
@@ -0,0 +1,294 @@
+<!doctype linuxdoc system>
+
+<article>
+
+<title>devices created by makedev
+<author> Andreas Jellinghaus <tt>aj@debian.org</tt>
+<date> version 0.3, based on Linux allocated device 2.1.62
+<abstract>
+	some devices are created by default, some are left out on boot
+	floppies, other devices are only created on demand and some
+	devices are obsolete or have new names. 
+</abstract>
+
+<sect> batches <p>
+
+call out devices are not generated by default. however if you need them,
+you can generate them (see below).
+
+<descrip>
+<tag/generic/all standard batches for normal Linux\/i386 systems.
+	(standard misc devices, ttyS[0-3], mouse, printer, tapes
+	(scsi, qic, qic117), audio, scsi generic, standard disk, cdroms
+	and ttys) 
+<tag/generic-m68k/all generic devices for m68k (additional
+	framebuffer, some mouse devices and m68k scsi disk devices are
+	included,
+	but busmouse devices and qic and qic117 are left out).
+<tag/boot-floppy/a subset of generic. (no audio, less ttys)
+<tag/std-hd/standard hard disks (hd[a-h,xd[ab],sd[a-h],ram disk,md,loop)
+<tag/std-cdrom/standard cdroms (scsi, old non-scsi non-atapi cdroms)
+<tag/compatiblity/collection of old devices. It is usefull to remove them, but
+make sure, that you have generated the new ones, and that you know, what
+you are doing !  serial-cu, printer-old, mouse-old, sr-old,
+qic-old, misc-old, sg-old
+<tag/update/special tag : reads \/proc\/devices and generates new devices
+	found there.
+</descrip>
+
+<sect> Limits (standard devices) <p>
+
+There are some limits in this version of devinfo : it will only create a
+special number of devices (e.g. ramdisks, hda partitions). If one of
+these limits is unrealistic, please tell me. Most limits have no good
+reason, I just didn't want to create hundreds of devices, so I only
+created a few. If a limit is too low for you : a) please tell me and b)
+modify /etc/devinfo (should be easy). <p>
+
+<descrip>
+<tag/ramdisks/8 devices ram[0-7]
+<tag/ide harddisks/20 partitions each (devices hd[a-h])
+<tag/xt harddisks/20 partitions each (devices xd[ab]
+<tag/loopback/8 devices loop[0-7] 
+<tag/metadisk/4 devices md[0-3]
+<tag/scsi cdrom/scd: 8 devices scd[0-7] 
+<tag/scsi cdrom/scd-all : 16 devices scd[0-15] 
+<tag/scsi generic/sg : 8 devices sg[0-7]
+<tag/scsi generic/sg-all : 16 devices sg[0-15]
+<tag/scsi tapes/8 devices st[0-7] 
+<tag/mscdex/4 cdrom devices dos_cd[0-3] 
+<tag/joysticks/2 devices each js[0-1] djs[0-1]
+<tag/other cdroms/only one device created : sonycd, gscd, optcd, sjcd,
+hitcd, mcd, cdu535, aztcd, cm206cd, bpcd (if there are several cdroms
+possible : please tell me !)          
+<tag/serial/default bootdisks and base system will only have ttyS[0-3],
+but you can create all possible devices ttyS[0-63] with "MAKEDEV serial"
+or several additional devices with "MAKEDEV ttyS4 ttyS5 ...".
+</descrip>
+
+<sect> additional devices <p>
+
+you can create these devices with "MAKEDEV name" and delete them with
+"MAKEDEV -d name". you can either use the name listed here (this will
+create all possible devices), or individual devices (use the device
+name) e.g. "serial" will create all 64 serial devices ttyS[0-63] but
+"ttyS0" will only create this one. 
+
+<sect1> serial devices <p>
+
+<descrip>
+<tag/isdn-tty/isdn terminal devices. 8 devices : ttyI[0-7]
+<tag/isdn-tty-all/isdn terminal devices. 64 devices : ttyI[0-63]
+
+<tag/isdn-ppp/isdn sync ppp network devices. 8 devices : ippp[0-7]
+<tag/isdn-ppp-all/isdn sync ppp network devices. 64 devices : ippp[0-63]
+
+<tag/isdn-io/isdn raw and control devices. 18 devices : 
+	isdn[0-7] isdnctrl[0-7] isdnctrl isdninfo
+<tag/isdn-io-all/isdn raw and control devices. 130 devices : 
+	isdn[0-63] isdnctrl[0-63] isdnctrl isdninfo
+
+<tag/serial-cu/serial callout devices. they are only for compatibility,
+most people don't need them. 64 devices : cua[0-63]
+
+<tag/isdn-cu/isdn call out devices. they are only for compatibility,
+most people don't need them. 64 devices : cui[0-7]
+<tag/isdn-cu-all/isdn call out devices. they are only for compatibility,
+most people don't need them. 64 devices : cui[0-63]
+
+<tag/chase{-cu}/devices for chase serial card (append -cu to create
+call out devices). 32 devices ttyH[0-31] (cuh[0-31])
+
+<tag/cyclades{-cu}/devices for cyclades serial card (append -cu to create
+call out devices). 32 devices ttyC[0-31] (cub[0-31])
+
+<tag/digiboard{-cu}/devices for digiboard serial card (append -cu to create
+call out devices). 32 devices ttyD[0-31] (cud[0-31])
+
+<tag/stallion{-cu}/devices for stallion serial card (append -cu to create
+callout devices). 32 devices ttyE[0-31] (cue[0-31])
+
+<tag/stallion-mem/devices to access stallion serial card. 4 devices
+stallionmem[0-3]
+
+<tag/specialix{-cu}/devices for specialix serial card (append -cu to create
+call out devices). 32 devices ttyX[0-31] (cux[0-31])
+
+<tag/rockport{-cu}/devices for rockport serial card (append -cu to create
+call out devices). 32 devices ttyR[0-31] (cur[0-31])
+
+<tag/riscom{-cu}/devices for riscom serial card (append -cu to create
+call out devices). 32 devices ttyL[0-31] (cul[0-31])
+
+<tag/hayes{-cu}/devices for hayes serial card (append -cu to create
+call out devices). 32 devices ttyP[0-31] (cup[0-31])
+
+<tag/baycom/devices for baycom radio modem. 32 devices bc[0-31]
+
+<tag/computone{-cu}/devices for computone intelliport II serial card
+(append -cu to create call out devices). 32 devices ttyF[0-31]
+(cuf[0-31])
+
+<tag/computone-ctrl/devices to access computone intelliport II serial
+card. 8 devices ip2ipl[0-3] and ip2stat[0-3]
+
+<tag/dcbri/spellcaster datacomm\/bri isdn card. 4 devices dcbri[0-3]
+<tag/specialix{-cu}/devices for specialix IO8+ serial card. 32 devices
+ttyW[0-31] (cuw[0-32])
+<tag/pam{-cu}/devices for PAM Software's mulitmodem boards. 32 devices
+ttyM[0-31] (cum[0-31])
+</descrip>
+
+<sect1> misc devices <p>
+
+<descrip>
+<tag/pty[p-za-e]/master pty devices. 16 devices pty?[0-9a-f] each
+<tag/tty[p-za-e]/slave tty devices. 16 devices pty?[0-9a-f] each
+<tag/floppy-all/generic only includes the fd0 and fd1 devices. this way
+you can generate devices for the 3rd ... 8th floppies. i recommend to
+install fdutils and use MAKEFLOPPIES to create the floppy devices you
+need. 30 devices each fd[0-7]*
+
+<tag/framebuffer/universal frame buffer (68k,sparc).
+	22 devices fb0* fb1*
+<tag/other-arch/amigamouse, atarimouse, sunmouse, openprom, kbd
+<tag/double/"double" compressed disk. 16 devices [c]double[0-7]
+<tag/ez[a-d]/syquest ex135 parallel port removable drive. 
+	20 partitions each
+<tag/ed[ab]/mca esdi hard disk. 20 partitions ed?* each
+
+<tag/sbpcd[234]/2nd,3rd,4th sound blaster cdrom controller. 4 devices sbpcdXX each
+<tag/mscdex/MSCDEX CD-ROM callback support. 4 devices dos_cd[0-3]
+<tag/cm205cd/cm205 cdrom devices (not supported in 2.x).
+	2 device cm205cd lmscd
+<tag/ad[a-p]/acsi disc\/cdrom (68k\/atari). 16 devices ad?* each
+<tag/gs4500/genius 4500 handheld scanner. 1 device gs4500
+<tag/slm/atari sm asci laser printer (68k\/atari). 4 devices slm[0-3]
+<tag/ht/ide tape. 2 devices ht0 nht0
+<tag/z2ram/zorro II ramdisk. 1 device z2ram
+<tag/cfs/coda network file-system.
+	1 device cfs0
+<tag/dtlk/DoubleTalk PC speech synthesizer, from RC Systems. 1 device dtlk
+
+<tag/ibcs2/ibcs2 devices as described in "Linux Allocated Devices".
+you need to create the directory /dev/inet before running makedev.
+ibcs2-unoff has lots more devices (i don't know if all are needed, or
+not. in doubt use ibcs2-unoff). 9 devices (socksys spx nfsd X0R inet/*).
+
+<tag/ibcs2-unoff/ibcs2 devices as described in the ibcs2 package. you
+need to create the directories "X" and "inet" before creating these
+devices. 74 devices (arp egp ggp icmp ip ipip pup rawip rip tcp udp nfsd
+X0R socksys spx pty[10-47] inet/* X/*)
+
+<tag/nvram/some special m68k hardware ? 1 device nvram
+
+<tag/system-sgi/devices for linux/sgi. 5 devices graphics opengl gfx
+input/mouse input/keyboard
+
+<tag/nb/network block devices. 8 devices nb*
+<tag/ftl/flash translatio layer (FTL) filesystems. max. 16 drives a-p
+with each 15 partitions (like scsi disks sd*).
+<tag/qng/Quantum Noice Generator. 1 device qng
+<tag/at200/Photometrics AT200 CCD camera. 1 device at200
+<tag/bttv/Brooktree Bt848 frame grabbers. 12 devices bttv[0-3]
+bttvc[0-3] bttv-vbi[0-3]
+<tag/winradio/WiNRADiO communications receiver card. 4 devices
+winradio[0-3]
+<tag/videotext/Teletext/videotext interfaces 2 devices vtx vttuner
+<tag/ihcp/ikon 1011[57] Versatec Greensheet Interface. 2devices ihcp[0-1]
+<tag/shimq/Linux/SGI shared memory input queue. 5 devices shmiq
+qcntl[0-3]
+<tag/sch/SCSI media changer. 8 devices sch[0-7]
+<tag/controla/Sony control-a1 stereo control bus. 
+</descrip>
+
+<sect1> sound <p>
+<descrip>
+<tag/mpu401/mpu401 MIDI data & status ports. 
+	2 devices mpu401{data,stat}
+<tag/tclmidi/tclmidi midi driver. 
+	12 devices midi[0-3] rmidi[0-3] smpte[0-3]
+</descrip>
+
+<sect1> misc <p>
+<descrip>
+<tag/wvisfgrab/quanta winvision frame grabber. 
+	1 device wvisfrab
+<tag/mmetfgrab/matrox meteor frame grabber.
+	1 device mmetfgrab
+<tag/ml16p[abc]/ml-16p experimental i\/o board.
+	20 device ml16p?* each
+<tag/scc/Z8530 HDLC driver. 8 devices scc[0-7]
+<tag/rom/rom\/flash memory card. 
+	32 devices rom[0-7] rrom[0-7] flash[0-7] rflash[0-7]
+<tag/netlink/netlink support. 2 devices route skip
+<tag/mlanai/myricom pci myrinet board. 8 devices mlanai[0-7]
+<tag/yamm/yet another micro monitor. 1 device yamm
+<tag/bdm/bdm interface for remote debugging MC683xx mc. 
+	6 devices pd_bdm[0-2] icd_bdm[0-2]
+<tag/holter/electrocardiognosis holter serial port.
+	3 devices holter[0-2]
+<tag/dsp56k/dsp56001 digital signal processor.
+	1 device dsp56k
+<tag/adbus/apple desktop bus. this was disabled, because it clashes with
+ab[b], the second acsi device (m68k/atari acsi disk).
+	1 device adb
+<tag/firewall/sf firewall package.
+	1 device firewall
+<tag/plink/sundance plink transputer boards.
+	12 devices [r]plink[0-3][d]
+<tag/enskip/enskip kernel encryption package
+<tag/yppcpci/yarc powerpc pci coprocessor card
+<tag/capi20/CAPI 2.0 interface.
+	21 devices capi20 capi20.[01-19]
+<tag/ma16/ma16 numeric accelerator card
+<tag/aps/spellcaster protocol service interface.
+	7 devices aps*
+<tag/sci/dolphin interconnect solutions' pci-sci bridge.
+	4 devices SCI\/[0-3]
+</descrip>
+
+<sect> compatibility <p>
+
+not all devices have a standard device name shared by all linux
+distributions, and many names have changed in the past. here is a list,
+so you can find new names, create the old devices (if you want), or
+remove them (to get rid of duplicates).
+
+<descrip>
+<tag/call out devices/cu* devices are not created by default. but you
+can create or remove them : serial-cu chase-cu cyclades-cu digiboard-cu
+stallion-cu specialix-cu isdn-cu     rockport-cu riscom-cu  hayes-cu
+computone-cu  
+<tag/printer-old/parallel port devices, standard name is lp[0-3], not par[0-3]
+<tag/mouse-old/(bus-)mouse devices : logimouse(logibm) psmouse(psaux)
+msmouse(inportbm) atimouse(atibm) jmouse(jbm)
+<tag/sr-old/scsi cdrom devices (now called scd)
+<tag/qic-old/qic streamer devices : nqt qt nqt11 qt11 nqt24 qt24 nqt120
+qt120 nqt150 qt150 qt-reset
+<tag/misc-old/for standardized names, some devices got renamed. old :
+midi, sbpcd, aztcd0, vcs0, lmscd, ramdisk
+new : midi00, sbpcd0, aztcd, vcs, ram0, cm205cd, ram0
+<tag/sg-old/scsi generic devices now use numbers (sg[0-7]), not letters
+sg[a-h])
+<tag/isdn-old/an old version created ipp* devices. this was a typo, they
+are called ippp*
+</descrip>
+
+i left some links : even if they are for compatibility, removing them
+might break existing software.
+
+<descrip>
+<tag/isdnctrl/link to "isdnctrl0"
+<tag/mfd0/m68k amiga hd floppy device
+</descrip>
+
+<sect> note about console and tty0 <p>
+
+New standard is : /dev/tty0 is a device (char,4,0).
+console should be a symlink : to tty0, or whatever your console is.
+If it is not a symlink, makedev will replace it with a symlink to tty0.
+Someday there will be a kernel managed device /dev/console to handle
+this (it will be char 5 1).
+
+</article> 
--- makedev-2.3.1.orig/debian/changelog
+++ makedev-2.3.1/debian/changelog
@@ -0,0 +1,747 @@
+makedev (2.3.1-46.2) stable unstable; urgency=low
+
+  * non-maintainer update
+  * argh, target stable and unstable
+
+ -- Adam Di Carlo <aph@debian.org>  Sun, 15 Oct 2000 14:01:16 -0400
+
+makedev (2.3.1-46.1) unstable; urgency=low
+
+  * non-maintainer update
+  * 'symlink mcdx mcdx0' was reversed (one line patch)
+
+ -- Adam Di Carlo <aph@debian.org>  Sun, 15 Oct 2000 04:36:30 -0400
+
+makedev (2.3.1-46) stable unstable; urgency=medium
+
+  * fix silly symlink loop between ram and ram1, closes: #69475, #69351
+  * fix similar symlink reversal between scd and sr devices, and make 'sr'
+    a valid target, not just when using 'update', closes: #69500
+  * change agpart to agpgart as per devices.txt, closes: #69319
+  * add sg* devices to generic targets that include SCSI, closes: #69231
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 29 Aug 2000 01:13:30 -0600
+
+makedev (2.3.1-45) stable unstable; urgency=low
+
+  * incorporates work done by Martin Schulze <joey@finlandia.infodrom.north.de>
+    with my profound thanks.
+  * Added gscd and cm206cd device files, closes: #69057
+  * Corrected mcdx drivers, support all five drives, closes: #69058
+  * Corrected symlink creation (i.e. use symlink() instead of ln -s)
+  * Added /dev/toshiba (Toshiba laptop SMM support), closes: #54729, #59242
+  * Added sdc and sdd to generic-m68k since they were missing, closes: #61027
+  * Made joystick devices readable by everybody (closes: Bug#61499)
+  * Added '$opts' whenever $0 aka MAKEDEV gets called, thus `-n' is passed
+    to the child properly, closes: #63159
+  * Added hyphen `-' between i2c and the number as described by devices.txt, 
+    closes: #63523
+  * Fixed wrong creation of hdi hdj hdk and hdl, closes: #64881
+  * Added hdc and hdd to generic-powerpc since they were missing, 
+    closes: #65852
+  * Added support for ttyI and cui (ignored) to 'update' target by
+    modifying cvt(), closes: #66838
+  * Corrected a whole bunch of math errors where a `$' was missing, trying
+    to add 1 to 'minor', closes: #68915
+  * Fixed /proc/devices-parser to ignore slashes, closes: #31854
+  * Removed out-dated Replaces, closes: #61256
+  * Added audioctl, closes: #60755
+  * Added agpart, closes: #61084
+  * Adjusted 3dfx to have file mode $video instead of $audio
+  * Added ipmikcs (Intelligent Platform Management) with mode 0600 (mode
+    may be unpracticable), closes: #67431
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 15 Aug 2000 21:52:23 -0600
+
+makedev (2.3.1-44) frozen unstable; urgency=low
+
+  * patch from tausq for a case I missed when converting expr to $(( )),
+    fixes problem creating sbpcd devices.  Target frozen since this was
+    marked release-critical.  Closes: #63585
+
+ -- Bdale Garbee <bdale@gag.com>  Sat,  6 May 2000 20:24:40 -0600
+
+makedev (2.3.1-43) frozen unstable; urgency=low
+
+  * add invocation of '/sbin/MAKEDEV std' to postinst to ensure key devices
+    have proper owner/group/perms on upgrades, closes: #61367
+  * replace /dev/MAKEDEV references with /sbin/MAKEDEV references in the
+    postinst
+  * target frozen since broken perms on /dev/tty keeps xterm from working
+    which is very confusing and frustrating on upgrades.
+
+ -- Bdale Garbee <bdale@gag.com>  Wed,  3 May 2000 14:27:04 -0600
+
+makedev (2.3.1-42) frozen unstable; urgency=low
+
+  * eliminate the use of expr, since it is in /usr, which may not be mounted
+    during system recovery when makedev is often needed.  Target frozen since
+    this was tagged release critical, closes: #62925
+
+ -- Bdale Garbee <bdale@gag.com>  Mon, 24 Apr 2000 22:27:18 -0600
+
+makedev (2.3.1-41) frozen unstable; urgency=low
+
+  * Arrange for all scd* devices to have hardlinked sr* counterparts as per
+    devices.txt.  Target frozen since this is release critical, closes: #61862
+
+ -- Bdale Garbee <bdale@gag.com>  Fri,  7 Apr 2000 20:01:39 -0600
+
+makedev (2.3.1-40) frozen unstable; urgency=low
+
+  * fix flakey code for discovering proper major numbers for several device
+    types.  This broke the raidtools postinst in some cases, which I think
+    makes this worth adding to frozen, even though there's no bug in the BTS
+    about it (problem reported and fixed during an IRC session).  There are
+    still a few potential major number problems in MAKEDEV, but they're all
+    for obscure devices that are not in devices.txt, and which I'll therefore 
+    probably remove entirely when rewriting makedev for woody.
+  * fix type, smtpe should be smpte, closes: #59061
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 19 Mar 2000 20:28:30 -0700
+
+makedev (2.3.1-39) frozen unstable; urgency=low
+
+  * add missing major number clause to thinkpad/smapi device, closes: #57381
+    target frozen since this is clearly release-critical
+
+ -- Bdale Garbee <bdale@gag.com>  Wed,  9 Feb 2000 12:07:07 -0700
+
+makedev (2.3.1-38) frozen unstable; urgency=low
+
+  * target frozen since 56724 was tagged release-critical
+  * rework ftape stuff to match 2.2 kernel device definitions, closes: #56724
+  * add code to create /dev/smapi and symlink it as /dev/thinkpad.  This can
+    be called as either smapi or thinkpad.  Closes: #54714
+  * add /dev/radio symlink to radio0, closes: #55649
+  * update the netlink target to create fwmonitor and the tap* devices,
+    closes: #54772
+  * add IRDA device support, closes: #47296
+
+ -- Bdale Garbee <bdale@gag.com>  Thu,  3 Feb 2000 23:51:58 -0700
+
+makedev (2.3.1-37) unstable; urgency=low
+
+  * add openprom entry for Sparc systems, closes: #54296
+
+ -- Bdale Garbee <bdale@gag.com>  Fri,  7 Jan 2000 20:03:00 -0700
+
+makedev (2.3.1-36) unstable; urgency=low
+
+  * fix cyclades target to make 32 instead of 33 devices, and update man page
+    to match what the code does, closes: #51892
+  * add st0/st1/scd0/scd1 to generic-i386 and generic-alpha to improve the
+    consistency across platforms, closes: #52871
+  * create an initial generic-arm target, anticipating the need as debian-arm
+    struggles to get ready to release with potato.
+  * update handling of network block devices (nb) so that specifying a single
+    device works as expected.  calling for 'nb' will give nb0 and nb1.  
+    Closes: #53781
+  * support digital joysticks (djs) in joystick/js target, closes: #53314
+  * update to current policy rev, add Build-Depends.
+
+ -- Bdale Garbee <bdale@gag.com>  Fri,  7 Jan 2000 02:14:24 -0700
+
+makedev (2.3.1-35) unstable; urgency=low
+
+  * change group of video4linux devices to new group video appearing in
+    base-passwd 3.0.4, closes: 51429
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 28 Nov 1999 20:00:12 -0700
+
+makedev (2.3.1-34) unstable; urgency=low
+
+  * re-craft 'ida' target the same way we did dac960 to allow the boot-floopies
+    folks to create just one or two cards worth.  Closes: #51341
+
+ -- Bdale Garbee <bdale@gag.com>  Fri, 26 Nov 1999 17:54:56 -0700
+
+makedev (2.3.1-33) unstable; urgency=low
+
+  * add usbmouse support to busmice target, closes: #50326
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 16 Nov 1999 03:20:03 -0700
+
+makedev (2.3.1-32) unstable; urgency=low
+
+  * add 'audio' to the targets for generic-i386, closes: #49935
+  * craft an initial generic-alpha target to make the boot-floppies stuff
+    work right.  For now, just clone the i386 target since I have no idea
+    what is really needed...  closes: #49934
+  * add support for creating ramN devices one at a time, closes: #49853
+  * add target 'consoleonly' that creates the minimum number of devices to
+    support /dev/console, and recraft the 'console' target to use it and then
+    add all the vcs* devices, et al.  Closes: #49852
+  * re-craft 'dac960' target to be a loop around targets dac960.[0-7] so that
+    boot-floppies creators can create just one or two cards worth of devices
+    instead of having to do them all.  Closes: #49864
+
+ -- Bdale Garbee <bdale@gag.com>  Mon, 15 Nov 1999 22:38:43 -0700
+
+makedev (2.3.1-31) unstable; urgency=low
+
+  * fixes for major numbers on some oddball CDROM types, needed for boot disks
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 10 Nov 1999 23:58:56 -0700
+
+makedev (2.3.1-30) unstable; urgency=low
+  
+  * fill in a few more audio devices, closes: #49107
+
+ -- Bdale Garbee <bdale@gag.com>  Wed,  3 Nov 1999 20:28:54 -0700
+
+makedev (2.3.1-29) unstable; urgency=low
+
+  * the /dev/vcs* handling is correct, closes: #42035
+  * fix case construct for ht0, closes: #42519
+  * fix major number determination for several devices, closes: #43560
+  * add js2, js3 to joystick device creation, but leave owner/group/mode
+    the same as for mice until/unless some more compelling argument is
+    presented, closes: #43790
+  * improve consistency of vcs device creation, making vcs0 and vcsa0, with
+    symlinks for vcs and vcsa, closes: #45698
+  * add support for /dev/3dfx, closes: #48734
+  * /dev/sr* is obsolete, use /dev/scd*, closes: #32723
+  * RH 2.5 was merged as of 2.3.1-24, closes: #45153
+  * FHS compliance
+
+ -- Bdale Garbee <bdale@gag.com>  Sat, 30 Oct 1999 16:53:32 -0600
+
+makedev (2.3.1-28) unstable; urgency=medium
+
+  * /o\ oops... -27 was broken badly.  Close 42355, 42359, 42361. 
+
+ -- Bdale Garbee <bdale@gag.com>  Tue,  3 Aug 1999 02:38:06 -0600
+
+makedev (2.3.1-27) unstable; urgency=medium
+
+  * fix loop's major number, closes 38559.
+  * fix group of scd* to be cdrom, not disk.  Closes 41227, 41812.
+  * add vbi symlink, closes 39406
+
+ -- Bdale Garbee <bdale@gag.com>  Mon,  2 Aug 1999 00:59:19 -0600
+
+makedev (2.3.1-26) unstable; urgency=medium
+
+  * fix another syntax error introduced in -25...  /o\
+
+ -- Bdale Garbee <bdale@gag.com>  Sat, 29 May 1999 03:12:32 -0600
+
+makedev (2.3.1-25) unstable; urgency=medium
+
+  * fix *ugly* typos introduced in -24, closes 38489, 38465.
+  * update MAKEDEV to install the mouse -> sunmouse link in generic-sparc,
+    in addition to making it in the postinst if needed.  Closes 38432.
+  * have MAKEDEV exit with error 1 if we hit a "don't know how to make device"
+    situation.  I'm a bit concerned about this since it *might* break a
+    package postinst somewhere.  However, it is clearly the right thing to do
+    on a purely conceptual level.  Closes 29974.
+  * add support for Free S/WAN (IPSEC) device, closes 38372.
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 26 May 1999 14:00:29 -0600
+
+makedev (2.3.1-24) unstable; urgency=low
+
+  * fold in patch from Espy to provide all the functionality of the RedHat
+    makedev 2.5.  Leave our version number as 2.3.1-XX for now, since we're
+    not actually cleanly derived from the 2.5 RedHat bits. Closes 37795, 28616.
+  * make 'scd' act like 'scd-all', closes 37071
+  * patch for postinst typo, closes 37612
+  * move MAKEDEV to /sbin, create an init.d fragment to put a symlink in the
+    /dev directory at boot time.  This should allow devfs to do its thing,
+    closing 37795, 33025.
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 26 May 1999 14:00:29 -0600
+
+makedev (2.3.1-23) stable unstable; urgency=low
+
+  * fix problems with st* and adb pointed out by Hartmut
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 15 Apr 1999 08:39:39 -0600
+
+makedev (2.3.1-22) unstable; urgency=low
+
+  * add 'hamradio' as a target, which is a macro for the new scc[0-7] and
+    bc[0-3] targets, closes 34773.  
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 14 Apr 1999 11:55:46 -0600
+
+makedev (2.3.1-21) stable unstable; urgency=low
+
+  * make /dev/mouse a symlink to /dev/sunmouse on sparc, closes 35616
+  * have postinst create audio devices, closes 35646
+  * also create [alm] suffix versions for st* devices, closes 33041
+  * add support for hd[ijkl]... noticed while investigating bug 33798
+  * use the same owner/group/perms for nvram that we use for kmem, closes 34111
+  * add loop to the std device set, closes 34899
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 14 Apr 1999 11:13:47 -0600
+
+makedev (2.3.1-20) stable unstable; urgency=medium
+
+  * release-critical fixes from Hartmut for powerpc, closes 34004
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 10 Mar 1999 07:51:08 -0700
+
+makedev (2.3.1-19) frozen unstable; urgency=medium
+
+  * fix identification of 'sg' in update, closes the part of 33752 (grave)
+    that I can duplicate on i386 in -18
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 23 Feb 1999 07:44:30 -0700
+
+makedev (2.3.1-18) frozen unstable; urgency=medium
+
+  * as requested by Wichert, have the postinst force /dev/kmem owner, group,
+    and permissions since this is a security issue, closes 33703.
+  * another patch needed for m68k slink boot floppies from Michael Schmitz
+
+ -- Bdale Garbee <bdale@gag.com>  Mon, 22 Feb 1999 22:56:47 -0700
+
+makedev (2.3.1-17) frozen unstable; urgency=low
+
+  * Wichert points out that /dev/kmem doesn't need to be group writeable.
+
+ -- Bdale Garbee <bdale@gag.com>  Sat, 20 Feb 1999 16:12:29 -0700
+
+makedev (2.3.1-16) frozen unstable; urgency=medium
+
+  * apply patch for m68k that is release-critical for slink
+
+ -- Bdale Garbee <bdale@gag.com>  Fri, 19 Feb 1999 20:07:05 -0700
+
+makedev (2.3.1-15) frozen unstable; urgency=medium
+
+  * fix major number for sunmouse as per Eric Delaunay, closes 33425
+  * tighten default permission on mouse and joystick devices, closes 32378
+  * change audio devices to root.audio 660, closes 32849
+  * apply patch from Eric Delaunay to fix problem with scsi devices and 2.2
+    kernels, closes 32999
+  * target 'frozen' since the sunmouse fix at the very least should be in 
+    slink...
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 17 Feb 1999 16:53:41 -0700
+
+makedev (2.3.1-14) frozen unstable; urgency=low
+
+  * additions from Eric Delaunay needed for sparc frozen, closes 32458
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 27 Jan 1999 13:54:31 -0700
+
+makedev (2.3.1-13) frozen unstable; urgency=low
+
+  * make random/urandom available separately, not just in std, closes 32145
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 19 Jan 1999 21:27:14 -0700
+
+makedev (2.3.1-12) frozen unstable; urgency=low
+
+  * add random/urandom to the std target, closes 31562 and 29193
+  * update manpage to indicate the manpage is out of date, I need to make a
+    chunk of time at some point to give it a thorough review/update.
+  * don't make /dev/cua*, fix group on /dev/ttyS*, closes 30867
+  * change postinst to use syntax that isn't bash-specific, closes 18807 
+    and 30849
+
+ -- Bdale Garbee <bdale@gag.com>  Sat,  9 Jan 1999 00:39:25 -0700
+
+makedev (2.3.1-11) frozen unstable; urgency=low
+
+  * allow 16 sd's instead of 8, as the kernel does.  closes 30555.
+  * create hdc and hdd in generic-i386, and create 20 partitions per hd 
+    instead of 4, closes 30522.
+  * go back (forward?) to using 'u' instead of '[DHE]' in fd entries, 
+    closes 30438.
+  * add 'fb' to both the generic-i386 and generic-powerpc clauses, closes
+    29228
+
+ -- Bdale Garbee <bdale@gag.com>  Sat, 12 Dec 1998 08:10:22 -0700
+
+makedev (2.3.1-10) frozen unstable; urgency=low
+
+  * instead of having the postinst explicitly link /dev/console, have it
+    call MAKEDEV if console doesn't exist.  Update MAKEDEV to know how to
+    link it for 2.0 kernels and prior, and create the explicit device for
+    2.1 and later running kernels.  Building this based on running kernel
+    revision doesn't feel clean, but I see no better way.
+
+ -- Bdale Garbee <bdale@gag.com>  Sun,  8 Nov 1998 18:49:30 -0700
+
+makedev (2.3.1-9) frozen unstable; urgency=low
+
+  * fix postinst to cd to /dev so that devices don't end up in /, now that
+    we don't do the cd in MAKEDEV itself
+  * move 'generic' to 'generic-i386', and have 'generic' use dpkg to determine
+    which generic-<arch> to use... this paves the way for fixing support for
+    other architectures.
+  * Several changes per drow on IRC:
+      change MAXVT from 8 to 63
+      change sd[ab] to create 15 instead of 8 subdevices
+      fix char->block on one scd instance
+      diffs to add support for powerpc machines
+
+ -- Bdale Garbee <bdale@gag.com>  Sun,  8 Nov 1998 18:49:30 -0700
+
+makedev (2.3.1-8) frozen unstable; urgency=low
+
+  * add support for ram0 to the ram* list (0 was omitted), part of 28933.
+  * device 'rtc' was part of 'misc', give it a top-level entry too to reduce
+    possible confusion.  Part of 28933.
+  * add an entry for 'initrd', closes 28933 (slink release-critical).
+
+ -- Bdale Garbee <bdale@gag.com>  Sun,  8 Nov 1998 10:18:37 -0700
+
+makedev (2.3.1-7) frozen unstable; urgency=low
+
+  * now that MAKEDEV is a script, this can be an 'all' package instead of
+    an 'any'.  Thanks to Hartmut Koptein for pointing this out.
+
+ -- Bdale Garbee <bdale@gag.com>  Fri,  6 Nov 1998 11:42:58 -0700
+
+makedev (2.3.1-6) frozen unstable; urgency=low
+
+  * add ttyS entry so update works with recent 2.1 kernels
+
+ -- Bdale Garbee <bdale@gag.com>  Mon,  2 Nov 1998 21:47:34 -0700
+
+makedev (2.3.1-5) frozen unstable; urgency=low
+
+  * fix typo affecting fb devices, closes 28742
+  * fix syntax used for wildcarded devices, part of closing 28769
+  * fix error in minor numbers for isdn-ippp, part of closing 28769
+
+ -- Bdale Garbee <bdale@gag.com>  Sun,  1 Nov 1998 23:09:45 -0700
+
+makedev (2.3.1-4) frozen unstable; urgency=low
+
+  * add support for additional scd and sg devices, closes 28029.
+  * change device names for busmice back to what we used in makedev-1.*, which
+    is also what the kernel documentation uses.  Closes 28143.
+  * add support for various devices in contemporary kernels, closes 27720.
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 28 Oct 1998 23:41:58 -0700
+
+makedev (2.3.1-3) unstable; urgency=low
+
+  * use 'dialout' instead of 'serial' to select owner/group/perms for ISDN
+    devices, closes 27536
+  * use 'dialout' as group for serial devices instead of 'uucp' to be 
+    compatible with prior Debian makedev packages. 
+
+ -- Bdale Garbee <bdale@gag.com>  Wed,  7 Oct 1998 22:50:36 -0600
+
+makedev (2.3.1-2) unstable; urgency=low
+
+  * fix scd-all and sg-all entry points.  The latter is just an alias for 'sg',
+    but the former was genuinely missing.  Switch sg devices to numeric suffix
+    to comply with kernel's devices.txt.  Closes 27490.
+  * close 26586, since I'm pretty sure it's a weirdy not caused by the package.
+  * add ISDN devices, closes 26971.
+  * add cfs0 for CODA, closes 23815.
+
+ -- Bdale Garbee <bdale@gag.com>  Tue,  6 Oct 1998 00:33:59 -0600
+
+makedev (2.3.1-1) unstable; urgency=low
+
+  * New upstream version.  This is a *significant* change!
+    This is a move (back?) from the short-lived makedev that depended on a     
+    non-free parser to the one that is just a shell script.  We will now be    
+    more like other Linux distributions, no longer depending on a non-free     
+    hunk of code to build the makedev package, and some porting and other      
+    issues will get better.                                                    
+  * With the major change in upstream code, several bugs are not relevant 
+    any more.  Therefore, close 12949, 18037, 18807, 20665, 22648, 22868, 
+    23771, 23898, 24477, 24572, 25660, 25840, 26058.
+  * add support for /dev/ptmx, built as part of pty*, closes 23612.
+  * add support for /dev/ed[ab], closes 23887.
+
+ -- Bdale Garbee <bdale@gag.com>  Sun,  6 Sep 1998 21:21:32 -0600
+
+makedev (1.6-32) frozen unstable; urgency=medium
+
+  * serial devices now owned by root.dialout, closes 22297 (important)
+  * tape devices now owned by root.tape, closes 11910 
+  * be explicit about which 'ls' we're calling, closes 22225
+
+ -- Bdale Garbee <bdale@gag.com>  Fri, 22 May 1998 23:52:58 -0600
+
+makedev (1.6-31) unstable; urgency=low
+
+  * add powerpc support, closes 21949
+  * lose the menu entry
+
+ -- Bdale Garbee <bdale@gag.com>  Sat,  2 May 1998 01:29:06 -0600
+
+makedev (1.6-30) unstable; urgency=low
+
+  * change from debmake to debhelper
+  * fix errors and warnings reported by lintian
+  * deliver devices.sgml instead of trying to build the .txt and .html files,
+    closes bug 16953
+
+ -- Bdale Garbee <bdale@gag.com>  Mon,  9 Feb 1998 22:31:43 -0700
+
+makedev (1.6-29) unstable; urgency=low
+
+  * add arpd device, on request of Elie Rosenblum <erosenbl@nyx.net>.
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 14 Jan 1998 09:42:14 -0700
+
+makedev (1.6-28) unstable; urgency=low
+
+  * new maintainer
+
+ -- Bdale Garbee <bdale@gag.com>  Fri,  5 Dec 1997 23:22:57 -0700
+
+makedev (1.6-27) unstable; urgency=low
+
+  * changed /dev/console handling. 
+  * updated devinfo to kernel 2.1.62 device list.
+  * changed all device with group "sys" to group "root".
+
+ -- Andreas Jellinghaus <aj@debian.org>  Sat,  8 Nov 1997 11:56:18 +0100
+
+makedev (1.6-26) unstable; urgency=low
+
+  * fixed bug #13787 : amigamouse1 was not corrected by postinst.
+  * fixed ad devices.
+  * added nvram device, added ad* to std-hd-m68k, added ttyS4 and ttyS6
+    to m68k boot-floppies and m68k generic
+
+ -- Andreas Jellinghaus <aj@debian.org>  Thu, 16 Oct 1997 20:09:14 +0200
+
+makedev (1.6-25) unstable; urgency=low
+
+  * bug #9077 is obsolete (kernel bug, fixed in kernel).
+  * libc6 release : closes bugs #12791 and #13122.
+  * fixed bug #12158 : added sr* and sg* devices.
+  * fixed bug #12385 : wrong standard number.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Fri, 19 Sep 1997 16:12:32 +0200
+
+makedev (1.6-24) unstable; urgency=low
+
+  * removed support for old floppy devices.
+  * only create generic floppy devices.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Wed, 10 Sep 1997 10:31:53 +0200
+
+makedev (1.6-23) unstable; urgency=low
+
+  * renamed isdn batches : isdn-xx is 8 devices, isdn-xx-all are 64
+    devices (isdn-io, isdn-tty, isdn-ippp, isdn-cu).
+  * increased numer to 5500 devices. (makedev is getting too large).
+
+ -- Andreas Jellinghaus <aj@debian.org>  Mon,  8 Sep 1997 21:40:11 +0200
+
+makedev (1.6-22) unstable; urgency=low
+
+  * bugfix with cvstree (i forgot to commit befor tagging :-()
+
+ -- Andreas Jellinghaus <aj@debian.org>  Mon,  8 Sep 1997 21:30:08 +0200
+
+makedev (1.6-21) unstable; urgency=low
+
+  * bugfix : out of memory. aarrgg : makedev has fixed size tables.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Mon,  8 Sep 1997 21:28:24 +0200
+
+makedev (1.6-20) unstable; urgency=low
+
+  * corrected problem with my own cvs tree
+
+ -- Andreas Jellinghaus <aj@debian.org>  Sun,  7 Sep 1997 16:54:10 +0200
+
+makedev (1.6-19) unstable; urgency=low
+
+  * changed /dev/full to mode 0622 (0666 was a security hole, as
+  			discussed on linux-kernel).
+
+ -- Andreas Jellinghaus <aj@debian.org>  Sun,  7 Sep 1997 16:22:27 +0200
+
+makedev (1.6-18) unstable; urgency=low
+
+  * added isdn-*-small devices (only 8 devices, not 64). 
+
+ -- Andreas Jellinghaus <aj@debian.org>  Fri, 22 Aug 1997 12:57:20 +0200
+
+makedev (1.6-17) unstable; urgency=low
+
+  * close bug 6541 (missing audio device) : not reproduceable 
+  * generate random and urandom, if missing (bug #12134)
+  * enabled makedev to create more sg* and sr* devices (bug #12158)
+  * changed doubletalkt to dtlk as requested
+  * sd[a-h]16 removed (bug, sda16 = sdb, scsi only supports 15
+    partitions) 
+
+ -- Andreas Jellinghaus <aj@debian.org>  Sun, 17 Aug 1997 19:19:33 +0200
+
+makedev (1.6-16) stable unstable; urgency=low
+
+  * security bug fixed : all mouse devices are now mode 600.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Wed, 30 Jul 1997 10:31:04 +0200
+
+makedev (1.6-15) unstable; urgency=low
+
+  * ibcs2 removed from generic set. revised ibcs2-unoff.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Tue, 29 Jul 1997 13:13:43 +0200
+
+makedev (1.6-14) unstable; urgency=low
+
+  * bug in postinst : type "MAKDEV" and "/dev/tty0" instead of "tty0" (#11441)
+  * stable version (libc5 compiled) for isdnutils
+
+ -- Andreas Jellinghaus <aj@debian.org>  Fri, 25 Jul 1997 10:12:14 +0200
+
+makedev (1.6-13) unstable; urgency=low
+
+  * fixed menu entry (thanks to Abdallah Chatila <acha@poboxes.com>)
+
+ -- Andreas Jellinghaus <aj@debian.org>  Wed,  9 Jul 1997 21:33:55 +0200
+
+makedev (1.6-12) unstable; urgency=low
+
+  * bug fix (changed doubletalk to class audio).
+
+ -- Andreas Jellinghaus <aj@debian.org>  Wed,  9 Jul 1997 09:45:38 +0200
+
+makedev (1.6-11) unstable; urgency=low
+
+  * Fixed isdn devices (ippp were missing).
+  * No longer create isdn device as default (that is done by isdnutils).
+  * Added doubletalk device. Added more ibcs2 stuff.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Tue,  8 Jul 1997 19:04:45 +0200
+
+makedev (1.6-10) unstable stable; urgency=low
+
+  * fixed console device, added documentation.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Wed, 25 Jun 1997 13:20:46 +0200
+
+makedev (1.6-9) unstable stable; urgency=low
+
+  * Added comment about cua devices.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Tue, 24 Jun 1997 09:21:20 +0200
+
+makedev (1.6-8) unstable stable; urgency=low
+
+  * changed /dev/console to be a symlink to /dev/tty0.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Sun, 22 Jun 1997 21:42:35 +0200
+
+makedev (1.6-7) unstable stable; urgency=low
+
+  * fixed bug with possible /dev/console symlink.
+  * fixed bug with not always creating /dev/tty0. (xfree 3.3 need this)
+
+ -- Andreas Jellinghaus <aj@debian.org>  Thu, 19 Jun 1997 22:38:46 +0200
+
+makedev (1.6-6) unstable; urgency=low
+
+  * fixed documentation (thanks to David Welton <davidw@efn.org>)
+  * patch for m68k from frank neumann included
+
+ -- Andreas Jellinghaus <aj@debian.org>  Mon,  9 Jun 1997 15:45:00 +0200
+
+makedev (1.6-5) unstable; urgency=low
+
+  * libc6 release
+  * added postinst script to change tty/pty devices to new major
+    numbers (the next time you boot).
+  * changed all serial devices from root.dialout to uucp.dialout
+  * added generic-ARCH batches
+  * changed (u)random permissions from 444 to 644
+  * corrected mcd/mcdx handling.
+  * small bugfix in manpages.
+
+ -- Andreas Jellinghaus <aj@debian.org>  Thu, 24 Apr 1997 19:12:58 +0200
+
+makedev (1.6-4) unstable frozen; urgency=low
+
+  * fixed manpage, added generic-m68k, added mfd0, changed framebuffer
+        create both : fb[01] and fb[01]current, changed framebuffer
+        class to mode 664. disabled adb (apple desktob bus).
+        this fixes bug #9053
+  * fixed mitsumi cdrom detection. 
+
+ -- Andreas Jellinghaus <aj@debian.org>  Wed, 23 Apr 1997 16:23:50 +0200
+
+makedev (1.6-3) unstable frozen; urgency=low
+
+  * bug fixed : st?l devices (nor st?1). 
+  * only create fd0 and fd1 with generic
+  * seperated old device names to "-old" groups
+  * not generating cm205cd by default
+  * "boot-floppy" added with less devices
+  * documentation in sgml and txt format
+
+ -- Andreas Jellinghaus <aj@debian.org>  Wed, 16 Apr 1997 12:58:56 +0200
+
+makedev (1.6-2) unstable frozen; urgency=high
+
+  * new maintainer Andreas Jellinghaus <aj@debian.org> 
+  * rewrote devinfo (according to linux allocated devices, 2.0.30,2.1.31
+  * this fixes bug #8396 (isdn devices)
+  * this fixes bug #8399 (don't generate cu* devices)
+  * this fixes bug #7144 (device for goldstar cdrom - gscd)
+  * this fixes bug #8173 (new names for floppy devices fd*)
+  * this fixes bug #8068 (hd[efgh] devises added : now ide[0123])
+    (this includes: renamed all floppy device (bug #8173),
+  * this fixes bug #3493 (isdn devices)
+  * this fixes bug #5542 (ttyS* group dialout, cu* not generated)
+  * this fixes bug #6926 (loop back devices corrected)
+  * this fixes bug #6983 (loop back devices creatable)
+  * this fixes bug #7038 (mcd device creatable (only one))
+  * this fixes bug #7754 (sr* devices are created for compatibility)
+  * this fixes parts of bug #7783 (only new tty/pty are created)
+  * bug #7755 obsolete (old cat file ? current man page is ok)
+  * bug #8009 obsolete (disks 1997-04-04 are ok)
+  * remove from generic : cua[0-3] lmscd ram sbpcd[9-15] vcs0
+    added to generic: X0R aztcd beep bpcd cm205cd cm206cd exttrp gscd
+      hd[efgh]* hitcd hwtrap initrd ippp* jbm loop* mcd md* modreq nsfd
+      nst*[1am] optcd ram[0-7] ramdisk relay16 relay8 rtc sd[abcdefgh][9-16]
+      sequence2 sg[0-7] sjcd socksys spx sr[0-7] st*[1am] tpqic* tty[13-63]
+      ttyI[0-63] urandom vcs vcs[13-63] vcsa vcsa[13-63] watchdog
+         (ca. + 600 devices, size + 11 k in a ext2fs)
+
+ -- Andreas Jellinghaus <aj@debian.org>  Sun, 13 Apr 1997 21:06:14 +0200
+
+makedev (1.6-1) unstable; urgency=low
+
+  * New upstream version.
+
+ -- Bruce Perens <bruce@pixar.com>  Wed, 19 Mar 1997 20:40:17 -0800
+
+makedev (1.5-4) unstable; urgency=low
+
+  * Add devices. Increase the maximum size of a batch from 32 to 1024.
+
+ -- Bruce Perens <bruce@pixar.com>  Tue, 17 Dec 1996 20:34:06 -0800
+
+makedev (1.5-3) unstable; urgency=low
+
+  * Make hd[a-d][8-20] and sd[a-h][8-20]. Remove bad empty "omit" from
+    makedev.cfg
+
+ -- Bruce Perens <bruce@pixar.com>  Sun, 8 Dec 1996 09:42:18 -0800
+
+makedev (1.5-2) unstable; urgency=low
+
+  * Change class of ttySn devices to dialout.
+  * Add ISDN.
+
+ -- Bruce Perens <bruce@pixar.com>  Fri, 6 Dec 1996 21:17:12 -0800
+
+makedev (1.5-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Bruce Perens <bruce@pixar.com>  Wed, 30 Oct 1996 20:36:44 -0800
+
+Local variables:
+mode: debian-changelog
+End:
--- makedev-2.3.1.orig/debian/conffiles
+++ makedev-2.3.1/debian/conffiles
@@ -0,0 +1 @@
+/etc/init.d/makedev
--- makedev-2.3.1.orig/debian/control
+++ makedev-2.3.1/debian/control
@@ -0,0 +1,13 @@
+Source: makedev
+Section: base
+Priority: required
+Maintainer: Bdale Garbee <bdale@gag.com>
+Build-Depends: debhelper
+Standards-Version: 3.1.1.1
+
+Package: makedev
+Architecture: all
+Depends: base-passwd (>= 3.0.4)
+Description: Creates special device files in /dev.
+ The MAKEDEV executable is used to populate the /dev directory with device
+ files.
--- makedev-2.3.1.orig/debian/copyright
+++ makedev-2.3.1/debian/copyright
@@ -0,0 +1,45 @@
+This package is maintained for Debian by Bdale Garbee, <bdale@gag.com>.
+
+It was downloaded from ftp.redhat.com, as a source .rpm from the 5.1 release
+tree.
+
+Copyright:
+
+No explicit copyright is asserted.  Nick Holloway is the earliest author 
+recorded in the sourcecode.  I queried him for an explicit statement 
+regarding the license status of this work, and this is his reply:
+  
+ Date: Tue, 21 Jul 1998 19:57:10 +0100
+ From: Nick Holloway <Nick.Holloway@alfie.demon.co.uk>
+ Message-Id: <199807211857.TAA19068@alfie.demon.co.uk>
+ To: Bdale Garbee <bdale@gag.com>
+ Subject: Re: makedev license?
+ 
+ > I maintain the makedev package for Debian GNU/Linux.  I am about to move 
+ > from the ill-fated makedev-1.6 to the makedev-2.3.1 derived from your work 
+ > by the folks at Redhat.  I don't see any evidence of a copyright assertion 
+ > or explicit license statement in the source.  Your name appears to be the 
+ > earliest attached to the current sourcecode.  Am I correct in assuming the 
+ > GPL?  We try to be meticulous about having our base system be compliant 
+ > with our Debian Free Software Guidelines, so I'd like an explicit statement.
+ 
+ It was never explictly released as GPL, as that would have required
+ including the file COPYING which would have been much larger than the
+ actual MAKEDEV script (I was also too lazy to find out what incantations
+ needed to be made).  However, it is intended to be used as anyone sees
+ fit, and the statement under "Copying Policy" is "Freely Redistributable"
+ (see MAKEDEV.lsm from any of the releases I made).
+ 
+ The more recent modifications were done by Michael K. Johnson at
+ Redhat.  I think the understanding was that he would be taking over the
+ maintenance of MAKEDEV (our discussion took place last September).
+ 
+ The only previous history was (according to an old posting to
+ comp.os.linux) that I started with Jim Winstead's script.
+ 
+ So, as far as I am concerned, it is consistentwith the Debian FSG.
+ 
+ -- 
+  `O O'  | Home: Nick.Holloway@alfie.demon.co.uk  http://www.alfie.demon.co.uk/
+ // ^ \\ | Work: Nick.Holloway@parallax.co.uk
+ 
--- makedev-2.3.1.orig/debian/dirs
+++ makedev-2.3.1/debian/dirs
@@ -0,0 +1,2 @@
+sbin
+usr/share/man/man8
--- makedev-2.3.1.orig/debian/init.d
+++ makedev-2.3.1/debian/init.d
@@ -0,0 +1,21 @@
+#! /bin/sh
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+
+set -e
+
+case "$1" in
+  start)
+	ln -fs /sbin/MAKEDEV /dev/MAKEDEV
+	;;
+  stop|reload|restart|force-reload)
+	;;
+  *)
+	N=/etc/init.d/makedev
+	# echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $N {start|stop|restart|force-reload}" >&2
+	exit 1
+	;;
+esac
+
+exit 0
--- makedev-2.3.1.orig/debian/postinst
+++ makedev-2.3.1/debian/postinst
@@ -0,0 +1,62 @@
+#!/bin/sh
+
+set +e
+
+#DEBHELPER#
+
+cd /dev
+
+/sbin/MAKEDEV std
+
+test -e /dev/console || /sbin/MAKEDEV console
+test -e /dev/tty0 || /sbin/MAKEDEV tty0
+test -e /dev/random || /sbin/MAKEDEV random
+test -e /dev/urandom || /sbin/MAKEDEV urandom
+test -e /dev/full && chmod 0622 /dev/full
+test -e /dev/audio || /sbin/MAKEDEV audio
+
+[ ! -f /dev/mouse -a -f /dev/sunmouse ] && ln -s sunmouse mouse
+
+for A in sda16 sdb16 sdc16 sdd16 sde16 sdf16 sdg16 sdh16 \
+	 ada16 adb16 adc16 add16 ade16 adf16 adg16 adh16
+do
+	test -e /dev/$A && rm /dev/$A
+done
+
+for A in logibm psaux inportbm atibm jbm smouse logimouse psmouse \
+msmouse atimouse jmouse amigamouse atarimouse sunmouse amigamouse1
+do
+	test -e /dev/$A && chmod 600 /dev/$A
+done
+
+# fix security hole caused by group-write permissions on kmem
+test -e /dev/kmem && chown root.kmem /dev/kmem && chmod 0640 /dev/kmem
+
+LIST=""
+
+for TYPE in tty pty ; do
+	for LETTER in p q r s t u v w x y z a b c d e ; do
+		if [ -e /dev/$TYPE$LETTER"0" ]; then
+			MAJOR="`/bin/ls -l /dev/$TYPE$LETTER"0"|cut -c33-36`"
+			if [ "$MAJOR" = 4 ] ; then
+				LIST="$LIST $TYPE$LETTER"
+			fi
+		fi
+	done
+done
+
+if [ -n "$LIST" ]; then
+	cat > /etc/rc.boot/makedev << EOF
+#!/bin/sh
+
+echo "Creating new console devices"
+/sbin/MAKEDEV $LIST
+
+rm /etc/rc.boot/makedev ; exit 0
+EOF
+
+chmod 755 /etc/rc.boot/makedev
+
+fi
+
+exit 0
--- makedev-2.3.1.orig/debian/preinst
+++ makedev-2.3.1/debian/preinst
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+rm -f /usr/man/man8/MAKEDEV.8 /usr/man/man8/MAKEDEV-C.8 \
+	/usr/man/man8/MAKEDEV-C.8.gz
+exit 0
--- makedev-2.3.1.orig/debian/rules
+++ makedev-2.3.1/debian/rules
@@ -0,0 +1,56 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+build: build-stamp
+build-stamp:
+	dh_testdir
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp
+	-$(MAKE) clean
+	-rm -f debian/devices.txt debian/devices*html
+	dh_clean
+
+# Build architecture-independent files here.
+binary-indep: build
+
+# Build architecture-dependent files here.
+binary-arch: build
+#	dh_testversion
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	ROOT=debian/tmp $(MAKE) install 
+
+	dh_installdocs 
+	dh_installexamples
+	dh_installmenu
+	dh_installinit
+	dh_installcron
+	dh_installmanpages
+	dh_undocumented
+	dh_installchangelogs
+	dh_strip
+	dh_compress
+	dh_fixperms
+	dh_suidregister
+	dh_installdeb
+	dh_shlibdeps
+	dh_gencontrol
+#	dh_makeshlibs
+	dh_md5sums
+	dh_builddeb
+
+source diff:                                                                  
+	@echo >&2 'source and diff are obsolete - use dpkg-source -b'; false
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary