Mon May 18 19:17:21 UTC 202020200518191721

Greetings! After three months in /testing, the PAM merge into the main tree
is now complete. When updating, be sure to install the new pam, cracklib, and
libpwquality packages or you may find yourself locked out of your machine.
Otherwise, these changes should be completely transparent and you shouldn't
notice any obvious operational differences. Be careful if you make any changes
in /etc/pam.d/ - leaving an extra console logged in while testing PAM config
changes is a recommended standard procedure. Thanks again to Robby Workman,
Vincent Batts, Phantom X, and ivandi for help implementing this. It's not
done yet and there will be more fine-tuning of the config files, but now we
can move on to build some other updates. Enjoy!
a/cracklib-2.9.7-x86_64-1.txz:  Added.
a/kernel-firmware-20200517_f8d32e4-noarch-1.txz:  Upgraded.
a/libcgroup-0.41-x86_64-7.txz:  Rebuilt.
  Rebuilt to add PAM support.
a/libpwquality-1.4.2-x86_64-1.txz:  Added.
a/lilo-24.2-x86_64-9.txz:  Rebuilt.
  Enable the "compact" option by default.
  liloconfig: correctly set the root partition.
a/pam-1.3.1-x86_64-1.txz:  Added.
a/shadow-4.8.1-x86_64-7.txz:  Rebuilt.
  Rebuilt to add PAM support.
a/utempter-1.2.0-x86_64-1.txz:  Upgraded.
a/util-linux-2.35.1-x86_64-6.txz:  Rebuilt.
  Rebuilt to add PAM support.
a/xfsprogs-5.6.0-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
ap/at-3.2.1-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
ap/cups-2.3.3-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
ap/hplip-3.20.5-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
ap/mariadb-10.4.13-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
ap/screen-4.8.0-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
ap/soma-3.3.0-noarch-1.txz:  Upgraded.
  Thanks to David Woodfall.
ap/sqlite-3.31.1-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
ap/sudo-1.9.0-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
ap/vim-8.2.0788-x86_64-1.txz:  Upgraded.
d/bison-3.6.2-x86_64-1.txz:  Upgraded.
d/meson-0.54.2-x86_64-1.txz:  Upgraded.
d/python-setuptools-46.4.0-x86_64-1.txz:  Upgraded.
d/vala-0.48.6-x86_64-1.txz:  Upgraded.
kde/calligra-2.9.11-x86_64-36.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
kde/kde-workspace-4.11.22-x86_64-7.txz:  Rebuilt.
  Rebuilt to add PAM support.
l/ConsoleKit2-1.2.1-x86_64-4.txz:  Rebuilt.
  Rebuilt to add PAM support.
l/boost-1.73.0-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
l/gnome-keyring-3.36.0-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
l/harfbuzz-2.6.6-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
l/icu4c-67.1-x86_64-1.txz:  Upgraded.
  Shared library .so-version bump.
l/imagemagick-7.0.10_13-x86_64-1.txz:  Upgraded.
l/libcap-2.34-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
l/libical-3.0.8-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
l/libuv-1.38.0-x86_64-1.txz:  Upgraded.
l/libvisio-0.1.7-x86_64-3.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
l/polkit-0.116-x86_64-3.txz:  Rebuilt.
  Rebuilt to add PAM support.
l/qt-4.8.7-x86_64-16.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
l/qt5-5.13.2-x86_64-4.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
l/qt5-webkit-5.212.0_alpha4-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
l/raptor2-2.0.15-x86_64-9.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
l/system-config-printer-1.5.12-x86_64-4.txz:  Rebuilt.
  Rebuilt to add PAM support.
l/vte-0.60.2-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
n/cifs-utils-6.10-x86_64-4.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/cyrus-sasl-2.1.27-x86_64-4.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/dovecot-2.3.10.1-x86_64-1.txz:  Upgraded.
  Rebuilt to add PAM support.
  Compiled against icu4c-67.1.
  This update fixes several denial-of-service vulnerabilities.
  For more information, see:
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-10957
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-10958
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-10967
  (* Security fix *)
n/mutt-1.14.1-x86_64-1.txz:  Upgraded.
n/netatalk-3.1.12-x86_64-3.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/netkit-rsh-0.17-x86_64-3.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/nss-pam-ldapd-0.9.11-x86_64-1.txz:  Added.
n/openssh-8.2p1-x86_64-3.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/openvpn-2.4.9-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/pam-krb5-4.9-x86_64-1.txz:  Added.
n/php-7.4.6-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
n/popa3d-1.0.3-x86_64-4.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/postfix-3.5.2-x86_64-1.txz:  Upgraded.
  Compiled against icu4c-67.1.
n/ppp-2.4.8-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/proftpd-1.3.6c-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
n/samba-4.12.2-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
  Recompiled against icu4c-67.1.
n/tin-2.4.4-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
n/vsftpd-3.0.3-x86_64-6.txz:  Rebuilt.
  Rebuilt to add PAM support.
t/texlive-2019.190626-x86_64-4.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
x/vulkan-sdk-1.2.135.0-x86_64-1.txz:  Upgraded.
x/xdm-1.1.11-x86_64-10.txz:  Rebuilt.
  Rebuilt to add PAM support.
x/xisxwayland-1-x86_64-1.txz:  Added.
xap/sane-1.0.30-x86_64-1.txz:  Upgraded.
  This update fixes several security issues.
  For more information, see:
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-12867
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-12862
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-12863
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-12865
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-12866
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-12861
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-12864
  (* Security fix *)
xap/vim-gvim-8.2.0788-x86_64-1.txz:  Upgraded.
xap/xlockmore-5.63-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
xap/xscreensaver-5.44-x86_64-2.txz:  Rebuilt.
  Rebuilt to add PAM support.
extra/brltty/brltty-6.1-x86_64-2.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
extra/pure-alsa-system/qt5-5.13.2-x86_64-4_alsa.txz:  Rebuilt.
  Recompiled against icu4c-67.1.
isolinux/initrd.img:  Rebuilt.
  Added PAM libraries, security modules, and config files.
usb-and-pxe-installers/usbboot.img:  Rebuilt.
  Added PAM libraries, security modules, and config files.

4 files changed, 180 insertions, 0 deletions

diff --git a/source/a/libpwquality/doinst.sh b/source/a/libpwquality/doinst.sh
new file mode 100644
index 00000000..044ad84c
--- /dev/null
+++ b/source/a/libpwquality/doinst.sh
@@ -0,0 +1,14 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/security/pwquality.conf.new
diff --git a/source/a/libpwquality/libpwquality.SlackBuild b/source/a/libpwquality/libpwquality.SlackBuild
new file mode 100755
index 00000000..c68b8cad
--- /dev/null
+++ b/source/a/libpwquality/libpwquality.SlackBuild
@@ -0,0 +1,146 @@
+#!/bin/bash
+
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=libpwquality
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# this typo was driving me crazy
+sed -i "s/there defaults/their defaults/g" doc/man/pam_pwquality.8*
+
+# Configure, build, and install:
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --disable-static \
+  --with-securedir=/lib${LIBDIRSUFFIX}/security \
+  --with-python-binary=python3 \
+  --build=$ARCH-slackware-linux || exit 1
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# The ones in /lib${LIBDIRSUFFIX}/security can also go:
+rm -f $PKG/lib${LIBDIRSUFFIX}/security/*.la
+
+mv $PKG/etc/security/pwquality.conf $PKG/etc/security/pwquality.conf.new
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS* ChangeLog COPYING* NEWS* README* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/libpwquality/libpwquality.url b/source/a/libpwquality/libpwquality.url
new file mode 100644
index 00000000..fe741a80
--- /dev/null
+++ b/source/a/libpwquality/libpwquality.url
@@ -0,0 +1 @@
+https://github.com/libpwquality/libpwquality
diff --git a/source/a/libpwquality/slack-desc b/source/a/libpwquality/slack-desc
new file mode 100644
index 00000000..0334b2ca
--- /dev/null
+++ b/source/a/libpwquality/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+libpwquality: libpwquality (password quality checking library)
+libpwquality:
+libpwquality: The libpwquality package provides common functions for password
+libpwquality: quality checking and also scoring them based on their apparent
+libpwquality: randomness. The library also provides a function for generating
+libpwquality: random passwords with good pronounceability.
+libpwquality:
+libpwquality: Homepage: https://github.com/libpwquality/libpwquality
+libpwquality:
+libpwquality:
+libpwquality: