Mon May 28 19:12:29 UTC 201820180528191229

a/pkgtools-15.0-noarch-13.txz:  Rebuilt.
  installpkg: default line length for --terselength is the number of columns.
  removepkg: added --terse mode.
  upgradepkg: default line length for --terselength is the number of columns.
  upgradepkg: accept -option in addition to --option.
ap/vim-8.1.0026-x86_64-1.txz:  Upgraded.
d/bison-3.0.5-x86_64-1.txz:  Upgraded.
e/emacs-26.1-x86_64-1.txz:  Upgraded.
kde/kopete-4.14.3-x86_64-8.txz:  Rebuilt.
  Recompiled against libidn-1.35.
n/conntrack-tools-1.4.5-x86_64-1.txz:  Upgraded.
n/libnetfilter_conntrack-1.0.7-x86_64-1.txz:  Upgraded.
n/libnftnl-1.1.0-x86_64-1.txz:  Upgraded.
n/links-2.16-x86_64-2.txz:  Rebuilt.
  Rebuilt to enable X driver for -g mode.
n/lynx-2.8.9dev.19-x86_64-1.txz:  Upgraded.
n/nftables-0.8.5-x86_64-1.txz:  Upgraded.
n/p11-kit-0.23.11-x86_64-1.txz:  Upgraded.
n/ulogd-2.0.7-x86_64-1.txz:  Upgraded.
n/whois-5.3.1-x86_64-1.txz:  Upgraded.
xap/network-manager-applet-1.8.12-x86_64-1.txz:  Upgraded.
xap/vim-gvim-8.1.0026-x86_64-1.txz:  Upgraded.

7 files changed, 752 insertions, 0 deletions

diff --git a/source/n/wireless_tools/doinst.sh b/source/n/wireless_tools/doinst.sh
new file mode 100644
index 00000000..ec61a630
--- /dev/null
+++ b/source/n/wireless_tools/doinst.sh
@@ -0,0 +1,26 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/rc.d/rc.wireless.conf.new
+
+# This is a kludge, but it's because there's no --reference option
+# on busybox's 'chmod':
+if [ -e etc/rc.d/rc.wireless ]; then
+  if [ -x etc/rc.d/rc.wireless ]; then
+    chmod 755 etc/rc.d/rc.wireless.new
+  else
+    chmod 644 etc/rc.d/rc.wireless.new
+  fi
+fi
+# Then config() it:
+config etc/rc.d/rc.wireless.new
+
diff --git a/source/n/wireless_tools/scripts/rc.wireless b/source/n/wireless_tools/scripts/rc.wireless
new file mode 100644
index 00000000..e7a35b89
--- /dev/null
+++ b/source/n/wireless_tools/scripts/rc.wireless
@@ -0,0 +1,342 @@
+#!/bin/sh
+# /etc/rc.d/rc.wireless
+# $Id: rc.wireless,v 1.13 2007/04/13 14:14:43 eha Exp eha $
+#
+# Wireless network card setup.
+#
+# This script sets up PCI, USB, and 32-bit Cardbus wireless devices
+# NOT 16-bit PCMCIA cards!  Those are configured in /etc/pcmcia/.
+# Single parameter to this script is the name of a network interface.
+# Normally this script is called from rc.inet1 rather than run
+# directly.
+#
+# This script is a modified '/etc/pcmcia/wireless' script
+# 09/apr/2004 by Eric Hameleers
+# 16/sep/2004 * Eric Hameleers * Fixed iwspy and iwpriv commands
+# 08/apr/2005 * Eric Hameleers * Allow per-interface overrides of the wireless
+#                                parameters (see /etc/rc.d/rc.inet1.conf)
+# 11/apr/2005 * Eric Hameleers * Tune wpa_supplicant interactions.
+# 23/apr/2005 * Eric Hameleers * First configure card with iwconfig,
+#                                before starting wpa_supplicant
+# 27/apr/2005 * Eric Hameleers * Multiple 'iwpriv $INTERFACE set' commands.
+# 14/feb/2006 * Eric Hameleers * Better error messages; alternative way of
+#                                getting HWADDR; parametrized WPA_WAIT value.
+#                                Don't kill an already running wpa_supplicant.
+# 29/apr/2006 * Pat Volkerding * Reverted HWADDR change, since it relies on
+#                                a binary (macaddr) that is not built or
+#                                installed by default since it is not
+#                                compatible with all interfaces.
+# 15/aug/2006 * Eric Hameleers * Added missing "" around $ESSID, which broke
+#                                ESSIDs that contain a space character.
+# 10/oct/2006 * Eric Hameleers * Added default empty values for all parameters.
+#                                This makes a second wireless card leave
+#                                wpa_supplicant alone if WPA is not configured.
+# 15/oct/2006 * Eric Hameleers * Swapped the calls to "key <key>" and
+#                                "key restricted" since that might be needed
+#                                for WEP to work reliably.
+# 09/jan/2007 * Eric Hameleers * Add explicit default values to wireless params;
+#                                also set the ESSID before IWPRIV commands,
+#                                needed for some RaLink cards;
+#                                use /proc/net/wireless instead of calling
+#                                iwconfig to determine if a card is wireless.
+# 13/apr/2007 * Eric Hameleers * Use of the IWPRIV variable was broken.
+#                                NOTE: if you need to enter multiple parameters
+#                                in IWPRIV, you must separate them with the pipe
+#                                (|) character - this used to be a space char!
+#                                See the example in rc.inet1.conf.
+# 16/apr/2008 * Pat Volkerding * Make sure that HWADDR is all upper case.
+# 23/apr/2008 * Pat Volkerding * Increase sleep time after bringing up an
+#                                interface to 3 seconds.  Some drivers
+#                                need this additional time to initalize.
+# 02/jan/2010 * Pat Volkerding * Look for /sys/class/net/$NETDEV/wireless rather
+#                                than the contents of /proc/net/wireless to find
+#                                if a network device is wireless.  In newer
+#                                kernels devices will not show up in
+#                                /proc/net/wireless until active.
+# 16/aug/2012 * Pat Volkerding * Use several tests to determine if an interface
+#                                is wireless, as the reliability of any given
+#                                test may depend on the kernel options and the
+#                                wireless driver used.
+#                                Convert the MAC address to uppercase in sed.
+# ------------------------------------------------------------------------------
+
+LOGGER=${LOGGER:-cat}
+
+if [ -z $IFNAME ] ; then
+  echo "WARNING: The script 'rc.wireless' must be executed by 'rc.inet1'!"  | $LOGGER
+  echo "         You should run the command \"/etc/rc.d/rc.inet1 <your_interface>_start\" yourself." | $LOGGER
+  return 1 2> /dev/null || exit 1
+fi
+
+INTERFACE=$1
+
+# Find the path where wireless tools are installed
+for IWPATH in /usr/{bin,sbin} /usr/local/{bin,sbin} /sbin /bin ; do
+    if [ -x $IWPATH/iwconfig ] ; then break ; fi
+done
+
+# The same for wpa_supplicant (needed for WPA support)
+for SUPPATH in /usr/{bin,sbin} /usr/local/{bin,sbin} /sbin /bin ; do
+    if [ -x $SUPPATH/wpa_supplicant ] ; then break ; fi
+done
+
+# Set all desired settings through the wireless tools
+IWCOMMAND="$IWPATH/iwconfig ${INTERFACE}"
+IWPRIVCMD="$IWPATH/iwpriv ${INTERFACE}"
+IWSPYCMD="$IWPATH/iwspy ${INTERFACE}"
+IFCOMMAND="/sbin/ip link set dev ${INTERFACE}"
+
+is_wireless_device ()
+{
+    # Return 0 for a wireless interface, or 1 for a non-wireless interface.
+    if LC_ALL=C $IWPATH/iwconfig $1 2>&1 | grep -q "IEEE 802.11" ; then
+        return 0
+    elif [ -d /sys/class/net/${1}/wireless ]; then
+        return 0
+    elif [ "$(cat /sys/class/net/${1}/uevent | grep DEVTYPE)" = "DEVTYPE=wlan" ]; then 
+        return 0
+    else # all tests failed, assume the device is not wireless (or add a better test :)
+        return 1
+    fi
+}
+
+###############
+# EXIT POINTS #
+###############
+
+# Is the device wireless?  If not, exit this script.
+is_wireless_device ${INTERFACE} || return 0 2> /dev/null || exit 0
+
+# If we stop a wireless interface using wpa_supplicant,
+# we'll kill its wpa_supplicant daemon too and exit this script:
+if [ "$2" = "stop" ]; then
+	WPAPID=$(echo $(ps axww | grep wpa_supplicant | grep i${INTERFACE}) | cut -f1 -d' ')
+	[ ${WPAPID} ] &&  kill ${WPAPID}
+	return 0
+fi
+
+# -----------------------------------------------------
+# Continue with the script - bringing the interface UP.
+# -----------------------------------------------------
+
+# Bring interface up - for determining the HWADDR
+$IFCOMMAND up
+sleep 3
+
+# Get the MAC address for the interface
+HWADDR=$(/sbin/ip link show dev ${INTERFACE} | sed -ne 's/.*link\/ether \(..:..:..:..:..:..\).*/\U\1/p') 
+
+# Empty all wireless parameters- some of them could still be set for a previous interface:
+# when rc.inet1 is sourced from rc.M all scripts are run in the same shell.
+CHANNEL=""
+ESSID=""
+FREQ=""
+FRAG=""
+IWCONFIG=""
+IWPRIV=""
+IWSPY=""
+KEY=""
+MODE=""
+NICKNAME=""
+NWID=""
+RATE=""
+RTS=""
+SENS=""
+WPA=""
+WPADRIVER=""
+WPACONF=""
+WPAWAIT=""
+# Read the configuration information for the card with address $HWADDR
+# from /etc/rc.d/rc.wireless.conf:
+[[ -r /etc/rc.d/rc.wireless.conf ]] && . /etc/rc.d/rc.wireless.conf
+
+# Let any per-interface overrides (the WLAN_xxxx parameters) that are set
+# in /etc/rc.d/rc.inet1.conf have precedence.
+# The reason: you might have multiple wireless cards of the same brand, or
+# connecting to multiple networks.
+# Position 'i' of this interface in the IFNAME array was determined in rc.inet1
+CHANNEL=${WLAN_CHANNEL[$i]:-${CHANNEL}}
+ESSID=${WLAN_ESSID[$i]:-${ESSID}}
+FREQ=${WLAN_FREQ[$i]:-${FREQ}}
+FRAG=${WLAN_FRAG[$i]:-${FRAG}}
+IWCONFIG=${WLAN_IWCONFIG[$i]:-${IWCONFIG}}
+IWPRIV=${WLAN_IWPRIV[$i]:-${IWPRIV}}
+IWSPY=${WLAN_IWSPY[$i]:-${IWSPY}}
+KEY=${WLAN_KEY[$i]:-${KEY}}
+MODE=${WLAN_MODE[$i]:-${MODE}}
+NICKNAME=${WLAN_NICKNAME[$i]:-${NICKNAME}}
+NWID=${WLAN_NWID[$i]:-${NWID}}
+RATE=${WLAN_RATE[$i]:-${RATE}}
+RTS=${WLAN_RTS[$i]:-${RTS}}
+SENS=${WLAN_SENS[$i]:-${SENS}}
+WPA=${WLAN_WPA[$i]:-${WPA}}
+# The "ext" interface will be default if not explicitly set
+WPADRIVER=${WLAN_WPADRIVER[$i]:-${WPADRIVER:="wext"}}
+# The default config file as installed by the wpa_supplicant package:
+WPACONF=${WLAN_WPACONF[$i]:-${WPACONF:="/etc/wpa_supplicant.conf"}}
+WPAWAIT=${WLAN_WPAWAIT[$i]:-${WPAWAIT:="60"}}
+
+
+[ -n "$VERBOSE" -a -n "$INFO" ] && echo "$0:  $1 information: '$INFO'"
+
+###################
+# WIRELESS CONFIG #
+###################
+
+# Mode needs to be first : some settings apply only in a specific mode!
+if [ -n "$MODE" ] ; then
+	echo "$0:  $IWCOMMAND mode $MODE" | $LOGGER
+        # if $IWCOMMAND fails, try taking the interface down to run it.
+        # Some drivers require this.
+	if ! $IWCOMMAND mode $MODE 2> /dev/null ; then
+		$IFCOMMAND down
+		$IWCOMMAND mode $MODE
+		$IFCOMMAND up
+		sleep 3
+        fi
+fi
+# This is a bit hackish, but should do the job right...
+if [ ! -n "$NICKNAME" ] ; then
+    NICKNAME=$(/bin/hostname)
+fi
+if [ -n "$ESSID" -o -n "$MODE" ] ; then
+	echo "$0:  $IWCOMMAND nick $NICKNAME" | $LOGGER
+	$IWCOMMAND nick $NICKNAME
+fi
+# Regular stuff...
+if [ -n "$NWID" ] ; then
+	echo "$0:  $IWCOMMAND nwid $NWID" | $LOGGER
+	$IWCOMMAND nwid $NWID
+fi
+if [ -n "$FREQ" ] ; then
+	echo "$0:  $IWCOMMAND freq $FREQ" | $LOGGER
+	$IWCOMMAND freq $FREQ
+elif [ -n "$CHANNEL" ] ; then
+	echo "$0:  $IWCOMMAND channel $CHANNEL" | $LOGGER
+	$IWCOMMAND channel $CHANNEL
+fi
+
+# WEP keys (non-WPA) 
+if [ -n "$KEY" -a ! -n "$WPA" ] ; then
+	if [ "$KEY" = "off" ]; then
+	  echo "$0:  $IWCOMMAND key open" | $LOGGER
+	  $IWCOMMAND key open
+	  echo "$0:  $IWCOMMAND key off" | $LOGGER
+	  $IWCOMMAND key off
+	else 
+	  echo "$0:  $IWCOMMAND key ************" | $LOGGER
+	  $IWCOMMAND key $KEY
+	  if ! echo "$KEY" | egrep -qw "restricted|open" ; then
+	    # Set "restricted" as the default security mode:
+	    echo "$0:  $IWCOMMAND key restricted" | $LOGGER
+	    $IWCOMMAND key restricted
+	  fi
+	fi
+fi
+if [ -n "$SENS" ] ; then
+	echo "$0:  $IWCOMMAND sens $SENS" | $LOGGER
+	$IWCOMMAND sens $SENS
+fi
+if [ -n "$RATE" ] ; then
+	echo "$0:  $IWCOMMAND rate $RATE" | $LOGGER
+	$IWCOMMAND rate $RATE
+fi
+if [ -n "$RTS" ] ; then
+	echo "$0:  $IWCOMMAND rts $RTS" | $LOGGER
+	$IWCOMMAND rts $RTS
+fi
+if [ -n "$FRAG" ] ; then
+	echo "$0:  $IWCOMMAND frag $FRAG" | $LOGGER
+	$IWCOMMAND frag $FRAG
+fi
+# More specific parameters
+if [ -n "$IWCONFIG" ] ; then
+	echo "$0:  $IWCOMMAND $IWCONFIG" | $LOGGER
+	$IWCOMMAND $IWCONFIG
+fi
+if [ -n "$IWSPY" ] ; then
+	echo "$0:  $IWSPYCMD $IWSPY" | $LOGGER
+	$IWSPYCMD $IWSPY
+fi
+# For RaLink cards, the SSID must be set right before configuring WPAPSK/TKIP parameters
+# using iwpriv commands in order to generate the wpapsk password. This should not hurt other cards:
+if [ -n "$ESSID" ] ; then
+  echo "$0:  $IWCOMMAND essid \"$ESSID\"" | $LOGGER
+  $IWCOMMAND essid "$ESSID"
+fi
+# The iwpriv can set one private IOCTL at the time, so if the $IWPRIV
+# variable contains multiple pipe ('|') separated settings, we split them here:
+# WARNING: if your iwpriv commands contain a WEP/WPA key, these can be logged
+# in /var/log/messages!
+if [ -n "$IWPRIV" ] ; then
+  echo "${IWPRIV}|" | \
+  while read -d '|' iwi; do
+    if [ -n "$iwi" ]; then
+      echo "$0:  '$IWPRIVCMD $iwi'" | $LOGGER
+      $IWPRIVCMD $iwi
+    fi
+  done
+fi
+
+##################
+# WPA_SUPPLICANT #
+##################
+
+# Support for WPA (wireless protected access) is provided by wpa_supplicant
+# for those drivers that support it (and it looks like wpa_supplicant is
+# the future for WPA support in Linux anyway)
+if [ "$WPA" = "wpa_supplicant" ] || [ "$WPA" = "wpaxsupplicant" ] && [ -x ${SUPPATH}/wpa_supplicant ]; then
+	# Interface down, so wpa_supplicant can associate with the AP
+	$IFCOMMAND down
+	#WPACONF=${WPACONF:-/etc/wpa_supplicant.conf}
+	WPA_OPTIONS=""
+	[ ${WPADRIVER} ] && WPA_OPTIONS="-D${WPADRIVER}" # specify the driver
+	[ ${WPA} = "wpaxsupplicant" ] && WPA_OPTIONS="${WPA_OPTIONS} -e" # Use external xsupplicant (disables the internal supplicant)
+
+	# We leave a running wpa_supplicant process in peace:
+	WPAPID=$(echo $(ps axww | grep wpa_supplicant | grep i${INTERFACE}) | cut -f1 -d' ')
+	if [ ${WPAPID} ]; then
+	  echo "$0:  wpa_supplicant found running already" | $LOGGER
+	else
+	  echo "$0:  wpa_supplicant -B -c${WPACONF} ${WPA_OPTIONS} -i$INTERFACE" | $LOGGER
+	  ${SUPPATH}/wpa_supplicant -B -c${WPACONF} ${WPA_OPTIONS} -i$INTERFACE
+	fi
+
+	# Buy wpa_supplicant some time to authenticate before bringing the
+	# interface back up... but we don't wait forever:
+	# You can increase this value in rc.inet1.conf (WLAN_WPAWAIT) or rc.wireless.conf (WPAWAIT)
+        # if your card takes longer to associate:
+	WPAWAIT=${WPAWAIT:-10}
+	wi=0
+	while [ $wi -lt $WPAWAIT ]; do
+	  wi=$(($wi+1)); sleep 1
+	  if (grep -q "^ctrl_interface=" ${WPACONF}); then
+	    if (LC_ALL=C ${SUPPATH}/wpa_cli -i$INTERFACE status | grep -q "^wpa_state=COMPLETED"); then break; fi
+	  else
+	    if (LC_ALL=C ${IWCOMMAND} | grep -Eq "Encryption key:....-"); then break; fi
+	  fi
+	done
+	if [ $wi -eq $WPAWAIT ]; then
+	  echo "WPA authentication did not complete, try running '/etc/rc.d/rc.inet1 ${INTERFACE}_start' in a few seconds." | $LOGGER
+	fi
+	# Bring interface up to avoid 'not ready' errors when calling iwconfig
+	$IFCOMMAND up
+	sleep 3
+
+else
+
+	# ESSID need to be last: most devices re-perform the scanning/discovery
+	# when this is set, and things like encryption keys had better be
+	# defined if we want to discover the right set of APs/nodes.
+	# NOTE: when automatic association does not work, but you manage to get
+	# an IP address by manually setting the ESSID and then calling dhcpcd,
+	# then the cause might be the incorrect definition of your ESSID="bla"
+	# parameter in rc.wireless.conf.
+	# Debug your wireless problems by running 'iwevent' while the card
+	# is being configured.
+	if [ -n "$ESSID" ] ; then
+	  echo "$0:  $IWCOMMAND essid \"$ESSID\"" | $LOGGER
+	  $IWCOMMAND essid "$ESSID"
+	fi
+
+fi
diff --git a/source/n/wireless_tools/scripts/rc.wireless.conf b/source/n/wireless_tools/scripts/rc.wireless.conf
new file mode 100644
index 00000000..5c611207
--- /dev/null
+++ b/source/n/wireless_tools/scripts/rc.wireless.conf
@@ -0,0 +1,226 @@
+# Wireless LAN adapter configuration
+#
+# Theory of operation : 
+#
+# The script attempts to match a block of settings to the specific wireless
+# card inserted, the *first* block matching the card is used.
+# The address format is "hwaddr", with * as a wildcard.
+# 'hwaddr' is the unique MAC address identifier of the wireless card.
+# The MAC address is usually printed on the card, or can be found via 
+# "/sbin/ip link show dev $interface"
+# Some examples here use only half of the MAC address with a wildcard to
+# match a whole family of cards...
+#
+# All the Wireless specific configuration is done through the Wireless
+# Extensions, so we will just call 'iwconfig' with the right parameters
+# defined below.
+# Of course, you need to have iwconfig installled on your system.
+# To download iwconfig, or for more info on Wireless Extensions :
+#	http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
+#
+# Note : you don't need to fill all parameters, leave them blank, in most
+# cases the driver will initialise itself with sane defaults values or
+# automatically figure out the value... And no drivers do support all
+# possible settings...
+#
+# -- This is a modified '/etc/pcmcia/wireless.opts' script --
+# -- I added sections for Prism/GT and Atheros based cards --
+# --    (supported by the prism54 and madwifi drivers)     --
+# --              16/sep/2004 * Eric Hameleers             --
+#
+
+VERBOSE=1
+
+case "$HWADDR" in
+
+## NOTE : Comment out the following five lines to activate the samples below ...
+## --------- START SECTION TO REMOVE -----------
+## Pick up any Access Point, should work on most 802.11 cards
+*)
+    INFO="Any ESSID"
+    ESSID="any"
+    ;;
+## ---------- END SECTION TO REMOVE ------------
+
+
+# Here are a few examples with a few Wireless LANs supported...
+# The matching is done on the first 3 bytes of the MAC address
+
+# SMC2835W EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter 
+00:04:E2:*)
+    INFO="SMC2835W EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter"
+    # ESSID (extended network name) : My Network, any
+    ESSID="any"
+    # NWID/Domain (cell identifier) : 89AB, 100, off
+    NWID=""
+    # Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
+    MODE="Managed"
+    # Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
+    FREQ=""
+    CHANNEL="7"
+    # Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm)
+    SENS=""
+    # Bit rate : auto, 1M, 11M,54M
+    RATE="auto"
+    # Encryption key : 4567-89AB-CD, s:password
+    # Example for 40-bit encryption:
+    #KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
+    # Example for 104-bit encryption (aka 128-bit WEP):
+    #KEY="d5ad2f05abd048ecf10b1c80c7"
+    KEY=""
+    # RTS threshold : off, 500
+    RTS=""
+    # Fragmentation threshold : off, 1000
+    FRAG=""
+    # Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
+    IWCONFIG=""
+    # iwspy parameters : + 01:23:45:67:89:AB
+    IWSPY=""
+    # iwpriv parameters : set_port 2, set_histo 50 60
+    IWPRIV=""
+;;
+
+# Multiband Atheros based 802.11a/b/g universal NIC cards
+00:05:4E:*)
+    INFO="Multiband Atheros based 802.11a/b/g universal NIC"
+    # ESSID (extended network name) : My Network, any
+    ESSID=""
+    # Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
+    MODE="Managed"
+    # Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
+    FREQ=""
+    CHANNEL="7"
+    # Bit rate : auto, 1M, 11M,54M
+    RATE="auto"
+    # Encryption key : 4567-89AB-CD, s:password
+    # Example for 40-bit encryption:
+    #KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
+    # Example for 104-bit encryption (aka 128-bit WEP):
+    #KEY="d5ad2f05abd048ecf10b1c80c7"
+    KEY=""
+    # Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
+    IWCONFIG=""
+    # iwspy parameters : + 01:23:45:67:89:AB
+    IWSPY=""
+    # iwpriv parameters : set_port 2, set_histo 50 60
+    IWPRIV=""
+    ;;
+
+# Lucent Wavelan IEEE (+ Orinoco, RoamAbout and ELSA)
+# Note : wvlan_cs driver only, and version 1.0.4+ for encryption support
+00:60:1D:*|00:02:2D:*)
+    INFO="Wavelan IEEE example (Lucent default settings)"
+    ESSID="Wavelan Network"
+    MODE="Managed"
+    #RATE="auto"
+    KEY="s:secu1"
+    # To set all four keys, use :
+    #KEY="s:secu1 [1] key s:secu2 [2] key s:secu3 [3] key s:secu4 [4] key [1]"
+    # For the RG 1000 Residential Gateway: The ESSID is the identifier on
+    # the unit, and the default key is the last 5 digits of the same.
+    #ESSID="084d70"
+    #KEY="s:84d70"
+    ;;
+
+# Cisco/Aironet 4800/3x0
+# Note : MPL driver only (airo/airo_cs), version 1.3 or later
+00:40:96:*|00:02:8A:*)
+    INFO="Cisco/Aironet example (Cisco default settings)"
+    ESSID="any"
+    # To set all four ESSID, use iwconfig v21 and the same trick as above
+    MODE="Managed"
+    #RATE="11M auto"
+    #KEY="d5ad2f05abd048ecf10b1c80c7"
+    KEY="off"
+    ;;
+
+# Samsung MagicLan (+ some other PrismII cards)
+# Note : Samsung binary library driver, version 1.20 or later
+00:00:F0:*|00:02:78:*)
+    INFO="Samsung MagicLan example (Samsung default settings)"
+    ESSID="any"
+    MODE="Managed"
+    CHANNEL="4"
+    RATE="auto"
+    #KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
+    #IWCONFIG="power on"
+    ;;
+
+# Raytheon Raylink/WebGear Aviator2.4
+# Note : doesn't work yet, please use for debugging only :-(
+00:00:8F:*|00:00:F1:*)
+    INFO="Raylink/Aviator2.4 example (Aviator default ad-hoc setting)"
+    ESSID="ADHOC_ESSID"
+    MODE="Ad-Hoc"
+    RATE="auto"
+    IWPRIV="set_framing 1"
+    ;;
+
+# Old Lucent Wavelan
+08:00:0E:*)
+    INFO="Wavelan example (Lucent default settings)"
+    NWID="0100"
+    MODE="Ad-Hoc"
+    FREQ="2.425G"
+    KEY="off"
+    ;;
+
+# Netwave (Xircom Netwave/Netwave Airsurfer)
+00:80:C7:*)
+    INFO="Netwave example (Netwave default settings)"
+    NWID="100"
+    KEY="00"
+    ;;
+
+# Proxim RangeLan2/Symphony (what is the MAC address ???)
+XX:XX:XX:*)
+    INFO="Proxim RangeLan2/Symphony example"
+    NWID="0"
+    MODE="Master"
+    CHANNEL="15"
+    IWPRIV="setsubchan 1"
+    ;;
+
+# No Wires Needed Swallow 550 and 1100 setting (what is the MAC address ???)
+XX:XX:XX:*)
+    INFO="NWN Swallow example"
+    ESSID="session"
+    KEY="0000-0000-00 open"
+    ;;
+
+# Symbol Spectrum24 setting (what is the MAC address ???)
+XX:XX:XX:*)
+    INFO="Symbol Spectrum24 example"
+    ESSID="Essid string"
+    ;;
+
+# Generic example (decribe all possible settings)
+*)
+    INFO="Fill with your own settings..."
+    # ESSID (extended network name) : My Network, any
+    ESSID=""
+    # NWID/Domain (cell identifier) : 89AB, 100, off
+    NWID=""
+    # Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
+    MODE=""
+    # Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
+    FREQ=""
+    CHANNEL=""
+    # Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm)
+    SENS=""
+    # Bit rate : auto, 1M, 11M
+    RATE=""
+    # Encryption key : 4567-89AB-CD, s:password
+    KEY=""
+    # RTS threshold : off, 500
+    RTS=""
+    # Fragmentation threshold : off, 1000
+    FRAG=""
+    # Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
+    IWCONFIG=""
+    # iwspy parameters : + 01:23:45:67:89:AB
+    IWSPY=""
+    # iwpriv parameters : set_port 2, set_histo 50 60
+    IWPRIV=""
+    ;;
+esac
diff --git a/source/n/wireless_tools/slack-desc b/source/n/wireless_tools/slack-desc
new file mode 100644
index 00000000..fb2e86da
--- /dev/null
+++ b/source/n/wireless_tools/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+wireless_tools: wireless_tools (utilities for wireless networking)
+wireless_tools:
+wireless_tools: This package contains tools and a library used for configuring
+wireless_tools: wireless networking interfaces:
+wireless_tools:  iwconfig (the main wireless tool),  iwlist (display more detailed
+wireless_tools:  information than iwconfig),  iwspy (get stats per MAC address and
+wireless_tools:  more),  iwpriv (set driver private ioctls),  iwgetid (show the
+wireless_tools:  ESSID or NWID of a device),  iwevent (display wireless events),
+wireless_tools:  ifrename (rename a network interface).
+wireless_tools:
+wireless_tools: The wireless_tools were written by Jean Tourrilhes.
diff --git a/source/n/wireless_tools/wireless_tools.SlackBuild b/source/n/wireless_tools/wireless_tools.SlackBuild
new file mode 100755
index 00000000..48ffa8ca
--- /dev/null
+++ b/source/n/wireless_tools/wireless_tools.SlackBuild
@@ -0,0 +1,117 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2012, 2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=wireless_tools
+VERSION=29
+BUILD=${BUILD:-12}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+else
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-wireless_tools
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf wireless_tools.$VERSION
+tar xvf $CWD/wireless_tools.$VERSION.tar.gz || exit 1
+cd wireless_tools.$VERSION
+zcat $CWD/wireless_tools.nowhine.diff.gz | patch -p1 --verbose --suffix=.orig --backup || exit 1
+zcat $CWD/wireless_tools.static.diff.gz | patch -p1 --verbose --suffix=.orig --backup || exit 1
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+make || exit 1
+
+mkdir -p $PKG/sbin
+cp -a ifrename iwconfig iwevent iwgetid iwlist iwpriv iwspy $PKG/sbin
+chmod 755 $PKG/sbin/*
+# The library seems to be used by kdenetwork, but since the .soname in the shared library
+# doesn't seem to be forward-thinking we'll leave that out still:
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
+cp -a libiw.a $PKG/usr/lib${LIBDIRSUFFIX}
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/include
+cp -a iwlib.h wireless.h $PKG/usr/include
+chmod 644 $PKG/usr/include/*.h
+
+mkdir -p $PKG/usr/man/man5
+cat iftab.5 | gzip -9c > $PKG/usr/man/man5/iftab.5.gz
+mkdir -p $PKG/usr/man/man7
+cat wireless.7 | gzip -9c > $PKG/usr/man/man7/wireless.7.gz
+mkdir -p $PKG/usr/man/man8
+for file in *.8 ; do
+  cat $file | gzip -9c > $PKG/usr/man/man8/$file.gz
+done
+
+mkdir -p $PKG/usr/doc/wireless_tools-$VERSION
+cp -a \
+  COPYING INSTALL *.txt README* \
+  $PKG/usr/doc/wireless_tools-$VERSION
+chmod 644 $PKG/usr/doc/wireless_tools-$VERSION/*
+
+# Add init scripts from Eric Hameleers:
+mkdir -p $PKG/etc/rc.d
+cat $CWD/scripts/rc.wireless > $PKG/etc/rc.d/rc.wireless.new
+chmod 755 $PKG/etc/rc.d/rc.wireless.new
+# This might contain a secret key, so we'll use chmod 600:
+cat $CWD/scripts/rc.wireless.conf > $PKG/etc/rc.d/rc.wireless.conf.new
+chmod 600 $PKG/etc/rc.d/rc.wireless.conf.new
+
+mkdir $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/wireless_tools/wireless_tools.nowhine.diff b/source/n/wireless_tools/wireless_tools.nowhine.diff
new file mode 100644
index 00000000..71d4d16f
--- /dev/null
+++ b/source/n/wireless_tools/wireless_tools.nowhine.diff
@@ -0,0 +1,11 @@
+--- ./iwlib.c.orig	2004-10-27 13:55:17.000000000 -0700
++++ ./iwlib.c	2005-07-13 22:20:33.000000000 -0700
+@@ -102,7 +102,7 @@
+ 					"Monitor" };
+ 
+ /* Disable runtime version warning in iw_get_range_info() */
+-int	iw_ignore_version = 0;
++int	iw_ignore_version = 1;
+ 
+ /************************ SOCKET SUBROUTINES *************************/
+ 
diff --git a/source/n/wireless_tools/wireless_tools.static.diff b/source/n/wireless_tools/wireless_tools.static.diff
new file mode 100644
index 00000000..71f4ec3f
--- /dev/null
+++ b/source/n/wireless_tools/wireless_tools.static.diff
@@ -0,0 +1,11 @@
+--- ./Makefile.orig	2004-10-11 15:16:15.000000000 -0700
++++ ./Makefile	2005-07-25 00:18:46.000000000 -0700
+@@ -17,7 +17,7 @@
+ ## Uncomment this to build tools using static version of the library
+ ## Mostly useful for embedded platforms without ldd, or to create
+ ## a local version (non-root).
+-# BUILD_STATIC = y
++BUILD_STATIC = y
+ 
+ ## Uncomment this to build without using libm (less efficient)
+ ## This is mostly useful for embedded platforms without maths.