5 files changed, 267 insertions, 0 deletions
diff --git a/patches/source/proftpd/doinst.sh b/patches/source/proftpd/doinst.sh
new file mode 100644
index 00000000..37fe02dd
--- /dev/null
+++ b/patches/source/proftpd/doinst.sh
@@ -0,0 +1,18 @@
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/ftpusers.new
+config etc/proftpd.conf.new
+
+# Remove any old proftpd files:
+rm -f var/run/proftpd/proftpd*
+
diff --git a/patches/source/proftpd/etc/ftpusers b/patches/source/proftpd/etc/ftpusers
new file mode 100644
index 00000000..d08f2a1f
--- /dev/null
+++ b/patches/source/proftpd/etc/ftpusers
@@ -0,0 +1,22 @@
+#
+# ftpusers	This file describes the names of the users that may
+#		_*NOT*_ log into the system via the FTP server.
+#		This usually includes "root", "uucp", "news" and the
+#		like, because those users have too much power to be
+#		allowed to do "just" FTP...
+#
+#
+# Version:	@(#)/etc/ftpusers	3.00	02/25/2001 volkerdi
+#
+# Original Author:  Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+#
+# The entire line gets matched, so no comments or extra characters on
+# lines containing a username.
+#
+# To enable anonymous FTP, remove the "ftp" user:
+ftp
+root
+uucp
+news
+
+# End of ftpusers.
diff --git a/patches/source/proftpd/etc/proftpd.conf b/patches/source/proftpd/etc/proftpd.conf
new file mode 100644
index 00000000..ffb0df3f
--- /dev/null
+++ b/patches/source/proftpd/etc/proftpd.conf
@@ -0,0 +1,74 @@
+# This is a basic ProFTPD configuration file.
+# It establishes a single server and a single anonymous login.
+# It assumes that you have a user/group "nobody" and "ftp" 
+# for normal/anonymous operation.
+
+ServerName			"ProFTPD Default Installation"
+#ServerType			standalone
+ServerType			inetd
+DefaultServer			on
+
+# Port 21 is the standard FTP port.
+Port				21
+# Umask 022 is a good standard umask to prevent new dirs and files
+# from being group and world writable.
+Umask				022
+
+# To prevent DoS attacks, set the maximum number of child processes
+# to 30.  If you need to allow more than 30 concurrent connections
+# at once, simply increase this value.  Note that this ONLY works
+# in standalone mode, in inetd mode you should use an inetd server
+# that allows you to limit maximum number of processes per service
+# (such as xinetd)
+MaxInstances			30
+
+# Set the user and group that the server normally runs at.
+User				nobody
+Group				nogroup
+
+# This next option is required for NIS or NIS+ to work properly:
+#PersistentPasswd off
+
+SystemLog			/var/log/proftpd.log
+TransferLog			/var/log/xferlog
+
+# Normally, we want files to be overwriteable.
+<Directory /*>
+  AllowOverwrite		on
+</Directory>
+
+# A basic anonymous FTP server configuration.
+# To enable this, remove the user ftp from /etc/ftpusers.
+<Anonymous ~ftp>
+  RequireValidShell		off
+  User				ftp
+  Group				ftp
+  # We want clients to be able to login with "anonymous" as well as "ftp"
+  UserAlias			anonymous ftp
+
+  # Limit the maximum number of anonymous logins
+  MaxClients			50
+
+  # We want 'welcome.msg' displayed at login, and '.message' displayed
+  # in each newly chdired directory.
+  DisplayLogin			welcome.msg
+  DisplayChdir			.message
+
+  # Limit WRITE everywhere in the anonymous chroot
+  <Limit WRITE>
+    DenyAll
+  </Limit>
+
+  # An upload directory that allows storing files but not retrieving
+  # or creating directories.
+#  <Directory incoming/*>
+#    <Limit READ>
+#      DenyAll
+#    </Limit>
+#
+#    <Limit STOR>
+#      AllowAll
+#    </Limit>
+#  </Directory>
+
+</Anonymous>
diff --git a/patches/source/proftpd/proftpd.SlackBuild b/patches/source/proftpd/proftpd.SlackBuild
new file mode 100755
index 00000000..a88f97e4
--- /dev/null
+++ b/patches/source/proftpd/proftpd.SlackBuild
@@ -0,0 +1,134 @@
+#!/bin/sh
+
+# Copyright 2008, 2009, 2010, 2011, 2015  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=1.3.5e
+DIRVER=1.3.5e
+BUILD=${BUILD:-1_slack13.1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-proftpd
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf proftpd-$VERSION
+tar xvf $CWD/proftpd-$VERSION.tar.?z* || exit 1
+cd proftpd-$DIRVER || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --enable-autoshadow \
+  --enable-ctrls \
+  --enable-ipv6 \
+  --localstatedir=/var/run \
+  --with-modules=mod_readme:mod_ratio:mod_tls:mod_wrap:mod_ctrls_admin \
+  --build=$ARCH-slackware-linux || exit 1
+# This caused funny messages about "Quotas off" with every FTP command,
+# and mod_wrap gets a compile error:
+# --with-modules= ... mod_quota ...
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# With no library to link against, these are useless:
+rm -rf $PKG/usr/include
+rm -f $PKG/etc/*
+rmdir $PKG/usr/libexec 2> /dev/null
+
+cat $CWD/etc/proftpd.conf > $PKG/etc/proftpd.conf.new
+cat $CWD/etc/ftpusers > $PKG/etc/ftpusers.new
+mkdir -p $PKG/home/ftp
+
+gzip -9 $PKG/usr/man/man?/*.?
+
+mkdir -p $PKG/usr/doc/proftpd-$VERSION
+cp -a COPYING CREDITS INSTALL NEWS README* \
+  contrib/README.mod_wrap contrib/README.ratio \
+  $PKG/usr/doc/proftpd-$VERSION
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/proftpd-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+cp -a contrib/README $PKG/usr/doc/proftpd-$VERSION/README.contrib
+cp -a doc sample-configurations $PKG/usr/doc/proftpd-$VERSION
+# Bloat removal:
+( cd $PKG/usr/doc
+  find . -name "*.sgml" -exec rm {} \;
+  find . -name "*.pdf" -exec rm {} \;
+)
+rmdir $PKG/usr/share/locale
+rmdir $PKG/usr/share
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/proftpd-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/patches/source/proftpd/slack-desc b/patches/source/proftpd/slack-desc
new file mode 100644
index 00000000..5ed80ca9
--- /dev/null
+++ b/patches/source/proftpd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+proftpd: proftpd (FTP server daemon)
+proftpd:
+proftpd: ProFTPD is the Professional File Transfer Protocol (FTP) server
+proftpd: daemon.  ProFTPD grew out of the desire to have a secure and
+proftpd: configurable FTP server, and out of a significant admiration of the
+proftpd: Apache web server.
+proftpd:
+proftpd:
+proftpd:
+proftpd:
+proftpd: