3 files changed, 150 insertions, 0 deletions
diff --git a/source/ap/lm_sensors/lm_sensors.SlackBuild b/source/ap/lm_sensors/lm_sensors.SlackBuild
new file mode 100755
index 00000000..72ad373d
--- /dev/null
+++ b/source/ap/lm_sensors/lm_sensors.SlackBuild
@@ -0,0 +1,116 @@
+#!/bin/sh
+
+# Copyright 2006, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=lm_sensors
+VERSION=${VERSION:-3.1.1}
+ARCH=${ARCH:-x86_64}
+NUMJOBS=${NUMJOBS:-" -j7 "}
+BUILD=${BUILD:-1}
+
+
+if [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+else
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
+cd ${PKGNAM}-$VERSION || exit 1
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+zcat $CWD/lm_sensors.makefile.diff.gz | patch -p1 --verbose || exit 1
+
+make user LIBDIR=/usr/lib${LIBDIRSUFFIX} || exit 1
+make user_install LIBDIR=/usr/lib${LIBDIRSUFFIX} || exit 1
+
+# Nope.
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.a
+
+# Nope.
+rm -rf $PKG/usr/include/linux
+
+# Do the .new thing with the config file:
+mv $PKG/etc/sensors3.conf $PKG/etc/sensors3.conf.new
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  CHANGES CONTRIBUTORS COPYING* INSTALL README* doc \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat << EOF > $PKG/install/doinst.sh
+#!/bin/sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/sensors3.conf.new
+EOF
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/ap/lm_sensors/lm_sensors.makefile.diff b/source/ap/lm_sensors/lm_sensors.makefile.diff
new file mode 100644
index 00000000..8216a8d1
--- /dev/null
+++ b/source/ap/lm_sensors/lm_sensors.makefile.diff
@@ -0,0 +1,15 @@
+--- ./Makefile.orig	2008-03-26 08:37:12.000000000 -0500
++++ ./Makefile	2008-10-25 20:05:44.000000000 -0500
+@@ -39,10 +39,10 @@
+ 
+ # If you want to install at some other place then at from which you will run
+ # everything, set DESTDIR to the extra prefix.
+-DESTDIR :=
++DESTDIR := /tmp/package-lm_sensors
+ 
+ # This is the prefix that will be used for almost all directories below.
+-PREFIX := /usr/local
++PREFIX := /usr
+ 
+ # Your C compiler
+ CC := gcc
diff --git a/source/ap/lm_sensors/slack-desc b/source/ap/lm_sensors/slack-desc
new file mode 100644
index 00000000..2f32f80d
--- /dev/null
+++ b/source/ap/lm_sensors/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+lm_sensors: lm_sensors (hardware monitoring package)
+lm_sensors:
+lm_sensors: lm_sensors provides tools for monitoring the temperatures, voltages,
+lm_sensors: and fans of Linux systems with hardware monitoring devices.  Included
+lm_sensors: are text-based tools for sensor reporting, and a library for sensors
+lm_sensors: access called libsensors.  It also contains tools for sensor hardware
+lm_sensors: identification and I2C bus probing.
+lm_sensors:
+lm_sensors: IMPORTANT NOTE:  If you have a Thinkpad, please read the warnings in
+lm_sensors: the README.thinkpad file.  lm_sensors has been known to cause damage
+lm_sensors: to some Thinkpads.