diff options
Diffstat (limited to 'source/xap/xfce/xfce.SlackBuild')
| -rwxr-xr-x | source/xap/xfce/xfce.SlackBuild | 248 |
1 files changed, 0 insertions, 248 deletions
diff --git a/source/xap/xfce/xfce.SlackBuild b/source/xap/xfce/xfce.SlackBuild deleted file mode 100755 index aaa38f99..00000000 --- a/source/xap/xfce/xfce.SlackBuild +++ /dev/null @@ -1,248 +0,0 @@ -#!/bin/sh - -# Copyright 2003 Slackware Linux, Inc., Concord, CA, USA -# Copyright 2007, 2008, 2009, 2010, 2011 Patrick J. Volkerding, Sebeka, MN, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=4.6.2 -BUILD=${BUILD:-5} - -# A few tarballs have different versions; handle them here -XDT_VERS=4.8.0 # xfce4-dev-tools version -# We're going to ship xdt from xfce-4.8 since it's not used for building -# release tarballs anyway, but it's handy to have around for building from -# git, and some folks might want to do that later... -EXO_VERS=0.3.107 # exo version -THUNAR_VERS=1.0.2 # thunar version -GXE_VERS=2.6.0 # gtk-xfce-engine version -TERM_VERS=0.4.6 # terminal version -MPAD_VERS=0.2.16 # mousepad version -XFWM_VERS=4.6.2 # xfwm4 version -XFWMTHEME_VERS=4.6.0 # xfwm4-themes version -SETTINGS_VERS=4.6.5 # xfce4-settings version -SESSION_VERS=4.6.2 # xfce4-settings version -PANEL_VERS=4.6.4 # xfce4-panel version -XFCEGUI_VERS=4.6.4 # libxfcegui4 version -XFCEMENU_VERS=4.6.2 # libxfce4menu version -LIBUTIL_VERS=4.6.2 # libxfce4util version -UTILS_VERS=4.6.2 # xfce-utils version -APPFINDER_VERS=4.6.2 # xfce4-appfinder version -XFCONF_VERS=4.6.2 # xfconf version -XFDESKTOP_VERS=4.6.2 # xfdesktop version -MIXER_VERS=4.6.1 # xfce4-mixer version -XFPRINT_VERS=4.6.1 # xfprint version -ORAGE_VERS=4.6.1 # orage version - -NUMJOBS=${NUMJOBS:--j6} - -# Automatically determine the architecture we're building on: -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) export ARCH=i486 ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$( uname -m ) ;; - esac -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp/xfce-build-dir} -PKG=$TMP/package-xfce - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP || exit 1 - -COMPRESSION=xz -COMPRESSUTIL=xz - -for file in \ - xfce4-dev-tools-$XDT_VERS.tar.$COMPRESSION \ - libxfce4util-$LIBUTIL_VERS.tar.$COMPRESSION \ - xfconf-$XFCONF_VERS.tar.$COMPRESSION \ - libxfcegui4-$XFCEGUI_VERS.tar.$COMPRESSION \ - libxfce4menu-$XFCEMENU_VERS.tar.$COMPRESSION \ - exo-$EXO_VERS.tar.$COMPRESSION \ - xfce4-panel-$PANEL_VERS.tar.$COMPRESSION \ - Thunar-$THUNAR_VERS.tar.$COMPRESSION \ - xfce4-settings-$SETTINGS_VERS.tar.$COMPRESSION \ - xfce4-session-$SESSION_VERS.tar.$COMPRESSION \ - xfdesktop-$XFDESKTOP_VERS.tar.$COMPRESSION \ - xfwm4-$XFWM_VERS.tar.$COMPRESSION \ - xfce-utils-$UTILS_VERS.tar.$COMPRESSION \ - xfce4-mixer-$MIXER_VERS.tar.$COMPRESSION \ - xfprint-$XFPRINT_VERS.tar.$COMPRESSION \ - xfce4-appfinder-$APPFINDER_VERS.tar.$COMPRESSION \ - gtk-xfce-engine-$GXE_VERS.tar.$COMPRESSION \ - Terminal-$TERM_VERS.tar.$COMPRESSION \ - xfwm4-themes-$XFWMTHEME_VERS.tar.$COMPRESSION \ - mousepad-$MPAD_VERS.tar.$COMPRESSION \ - orage-$ORAGE_VERS.tar.$COMPRESSION ; -do - $COMPRESSUTIL -dc $CWD/src/$file | tar xvf - || exit 1 - cd $(basename $file .tar.$COMPRESSION) || exit 1 - chown -R root:root . - find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - - # Here's where we patch or set up any other package-specific stuff: - # Patch to only show xfcalendar in XFce (otherwise it shows up in - # KDE's Lost & Found and does not work): - if [ "$file" = "orage-$ORAGE_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/xfcalendar.desktop.in.diff.gz | patch -p1 --verbose || exit 1 - fi - # Make Thunar respect --docdir - if [ "$file" = "Thunar-$THUNAR_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/thunar-1.0.2-fixup_docdir.diff.gz | patch -p1 --verbose || exit 1 - zcat $CWD/patches/Thunar.thunar-vfs-io-local.diff.gz | patch -p0 --verbose || exit 1 - fi - # Fix the missing education icon in the desktop menu - if [ "$file" = "xfdesktop-$XFDESKTOP_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/xfdesktop-fix_education_icon.diff.gz | patch -p1 --verbose || exit 1 - fi - # 1) Launch xfce through consolekit so that ck enabled stuff works in xfce - # 2) Fix comments in /etc/xfce/xdg/xfce4/Xft.xrdb - # http://bugzilla.xfce.org/show_bug.cgi?id=6314 - # 3) Load system-wide .Xmodmap, not just the one in $HOME - if [ "$file" = "xfce-utils-$UTILS_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/xfce-utils.xinitrc.consolekit.diff.gz | patch -p1 --verbose || exit 1 - zcat $CWD/patches/fixup_comments_in_xfce-utils-Xft.xrdb.diff.gz | patch -p1 --verbose || exit 1 - zcat $CWD/patches/xfce-utils-load_systemwide_Xmodmap.diff.gz | patch -p1 --verbose || exit 1 - fi - # Fix a couple of bugs from mousepad git - if [ "$file" = "mousepad-$MPAD_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/mousepad-fix_find_and_replace.diff.gz | patch -p1 --verbose || exit 1 - zcat $CWD/patches/mousepad-fix_find.diff.gz | patch -p1 --verbose || exit 1 - fi - # Fix a plugin moving bug in the panel - if [ "$file" = "xfce4-panel-$PANEL_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/no_sensitive_panel_during_plugin_moves.patch.gz | patch -p1 --verbose || exit 1 - fi - # Start kde4 services instead of kde3 - # http://bugzilla.xfce.org/show_bug.cgi?id=7382 - if [ "$file" = "xfce4-session-$SESSION_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/xfsm-compat-kde.c-start-kde4-services.diff.gz | patch -p1 --verbose || exit 1 - fi - # End patches/package-specific stuff - - CFLAGS="$SLKCFLAGS" \ - CXXFLAGS="$SLKCFLAGS" \ - ./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc/xfce \ - --mandir=/usr/man \ - --docdir=/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION) \ - --htmldir=/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION)/html \ - --disable-static \ - --build=$ARCH-slackware-linux \ - $PACKAGE_SPECIFIC_OPTIONS - - # Unset this now -- we're done with it - unset PACKAGE_SPECIFIC_OPTIONS - - make $NUMJOBS || make || exit 1 - make install || exit 1 - make install DESTDIR=$PKG - - mkdir -p $PKG/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION) - # This will cause errors, but won't miss any docs: - cp -a \ - AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \ - NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \ - $PKG/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION) \ - 2> /dev/null || true - - # If there's a ChangeLog, installing at least part of the recent history - # is useful, but don't let it get totally out of control: - if [ -r ChangeLog ]; then - DOCSDIR=$(echo $PKG/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION)) - cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog - touch -r ChangeLog $DOCSDIR/ChangeLog - fi - - cd - ; -done - -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# The Rodent icon theme isn't xdg compliant, so it spews errors quite often -# and just flat breaks some things here and there, so the Xfce team elected -# not to ship it with 4.6.x. In the meantime, we'll default to gnome. -sed -i s/Rodent/gnome/ \ - $PKG/etc/xfce/xdg/xfce4/xfconf/xfce-perchannel-xml/xsettings.xml - -# We're going to borrow the "applications-education" icons (six of them) -# from the kde oxygen icon theme (it's LGPL) -tar xf $CWD/icons.tar.xz -C $PKG/usr/share - -# We don't want any of those icon caches -find $PKG/usr/share/icons -type f -name "index-theme.cache" -exec rm -f {} \; - -# Compress and if needed symlink the man pages: -if [ -d $PKG/usr/man ]; then - ( cd $PKG/usr/man - for manpagedir in $(find . -type d -name "man*") ; do - ( cd $manpagedir - for eachpage in $( find . -type l -maxdepth 1) ; do - ln -s $( readlink $eachpage ).gz $eachpage.gz - rm $eachpage - done - gzip -9 *.? - ) - done - ) -fi - -mkdir -p $PKG/etc/profile.d -cp -a $CWD/profile.d/* $PKG/etc/profile.d -chown root:root $PKG/etc/profile.d/* -chmod 755 $PKG/etc/profile.d/* - -mkdir -p $PKG/etc/X11/xinit -( cd $PKG/etc/X11/xinit - ln -sf ../../xfce/xdg/xfce4/xinitrc xinitrc.xfce - chmod 755 ../../xfce/xdg/xfce4/xinitrc -) - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $TMP/xfce-$VERSION-$ARCH-$BUILD.txz - |